\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{rhaberkorn}
\pdfinfo{
  /Title (sciteco-v2-0-0.pdf)
  /Creator (Cheatography)
  /Author (rhaberkorn)
  /Subject (SciTECO v2.0.0 Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{000000}
\definecolor{LightBackground}{HTML}{F7F7F7}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{SciTECO v2.0.0 Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{rhaberkorn} via \textcolor{DarkBackground}{\uline{cheatography.com/188453/cs/39312/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}rhaberkorn \\
  \uline{cheatography.com/rhaberkorn} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 22nd June, 2023.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{3}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Introduction}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{Overview of \{\{link="https://github.com/rhaberkorn/sciteco"\}\}SciTECO\{\{/link\}\} as an editor as of \{\{link="https://github.com/rhaberkorn/sciteco/releases/tag/v2.0.0"\}\}v2.0.0\{\{/link\}\}. A full language description can be read in \{\{link="http://sciteco.sf.net/manuals/sciteco.7.html"\}\}{\bf{sciteco}}(7)\{\{/link\}\}.% Row Count 7 (+ 7)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{p{0.74655 cm} x{4.23045 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Legend}}  \tn
% Row 0
\SetRowColor{LightBackground}
`\$` & String delimiter (escape key) \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
`\$\$` & Terminate command line \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
{\emph{n}} & Some number (implied 1). Usually you can write `-` instead of `-1`. \tn 
% Row Count 4 (+ 2)
% Row 3
\SetRowColor{white}
{\emph{text}} & Arbitrary {\emph{text}} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
{\emph{q}} & A named storage area called a Q-register. Use any single character to name the register. There are also two letter names initiated by `\#` and long names in `{[}...{]}` braces. \tn 
% Row Count 11 (+ 6)
% Row 5
\SetRowColor{white}
`\textasciicircum{}`{\emph{X}} & Ctrl+{\emph{X}}, but can also be types with a caret `\textasciicircum{}`. \tn 
% Row Count 13 (+ 2)
% Row 6
\SetRowColor{LightBackground}
{\emph{LF}} & Line Feed, ie. Enter/Return key \tn 
% Row Count 14 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{5.377cm}}{For instance: `-C` = `-1C` = `R` \newline `Qa` = `Q{[}A{]}`, `Q\#ab` = `Q{[}AB{]}` \newline Ctrl+I = `\textasciicircum{}I` = Tab key, Ctrl+J = `\textasciicircum{}J` = {\emph{LF}}}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{p{0.74655 cm} x{4.23045 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Exiting}}  \tn
% Row 0
\SetRowColor{LightBackground}
\seqsplit{`EX\$\$`} & Exit, but only if no buffer is "dirty" (unsaved). \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\seqsplit{`-EX\$\$`} & Exit even if buffer is "dirty", ie. discarding all unsaved changes. \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{`:EX\$\$`} & Exit, saving all "dirty" buffers. \tn 
% Row Count 6 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.4931 cm} x{3.4839 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{File Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
`EB`{\emph{filename}}`\$` & Edit buffer or open new file. Files, that did not exist on disk, will not be created until you save them. \tn 
% Row Count 4 (+ 4)
% Row 1
\SetRowColor{white}
`EB\$` & Edit the unnamed buffer. \tn 
% Row Count 5 (+ 1)
% Row 2
\SetRowColor{LightBackground}
`0EB` & Show buffer ring/list. You can specify a filename afterwards to open a file. \tn 
% Row Count 8 (+ 3)
% Row 3
\SetRowColor{white}
{\emph{n}}`EB\$` & Select {\emph{n}}-th buffer in ring. \tn 
% Row Count 10 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`EW\$` & Write (save) current buffer under its current name. Does not work on the unnamed buffer. \tn 
% Row Count 14 (+ 4)
% Row 5
\SetRowColor{white}
`EW`{\emph{filename}}`\$` & Save current buffer under new name (Save As). \tn 
% Row Count 16 (+ 2)
% Row 6
\SetRowColor{LightBackground}
`EF` & Finish (close) current buffer. \tn 
% Row Count 18 (+ 2)
% Row 7
\SetRowColor{white}
`-EF` & Finish (close) current buffer, discarding all unsaved changes. \tn 
% Row Count 21 (+ 3)
% Row 8
\SetRowColor{LightBackground}
`FG`{\emph{path}}`\$` & Go to folder {\emph{path}}, ie. change working directory. \tn 
% Row Count 23 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{5.377cm}}{{\bf{Tip:}} You can use the Tab-key for autocompleting filenames and paths.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.64241 cm} x{3.33459 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Copy \& Paste}}  \tn
% Row 0
\SetRowColor{LightBackground}
`X`{\emph{q}} & Copy from current position until beginning of next line into Q-Register {\emph{q}}. \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
{\emph{n}}`X`{\emph{q}} & Copy next {\emph{n}} lines into Q-Register {\emph{q}}. \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
{\emph{n}}`:X`{\emph{q}} & Append next {\emph{n}} lines into Q-Register {\emph{q}}. \tn 
% Row Count 7 (+ 2)
% Row 3
\SetRowColor{white}
{\emph{n}}`X`{\emph{q}} {\emph{n}}`K` & Cut next {\emph{n}} lines into Q-Register {\emph{q}}. \tn 
% Row Count 9 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`HX`{\emph{q}} & Copy entire buffer in to Q-Register {\emph{q}}. \tn 
% Row Count 11 (+ 2)
% Row 5
\SetRowColor{white}
`G`{\emph{q}} & Get (paste) Q-Register {\emph{q}} at current position. \tn 
% Row Count 13 (+ 2)
% Row 6
\SetRowColor{LightBackground}
`I`{\emph{...}}`\textasciicircum{}EQ`{\emph{q...}} & Paste Q-Register {\emph{q}} while inserting text. \tn 
% Row Count 15 (+ 2)
% Row 7
\SetRowColor{white}
`E\%`{\emph{qFILE}}`\$` & Save Q-Register {\emph{q}} into {\emph{FILE}}. \tn 
% Row Count 17 (+ 2)
% Row 8
\SetRowColor{LightBackground}
`EQ`{\emph{q}}`\$` & Edit Q-Register {\emph{q}} as a text buffer. \tn 
% Row Count 19 (+ 2)
% Row 9
\SetRowColor{white}
`EQ`{\emph{qFILE}}`\$` & Read {\emph{FILE}} into Q-Register {\emph{q}}. \tn 
% Row Count 21 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.24425 cm} x{3.73275 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Text Insertion}}  \tn
% Row 0
\SetRowColor{LightBackground}
`I`{\emph{text}}`\$` & Insert {\emph{text}} into buffer. \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`\textasciicircum{}I`{\emph{text}}`\$` & Insert {\emph{text}} with leading tab/indentation. Can be typed with the Tab-key! \tn 
% Row Count 5 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{0.89586 cm} x{4.08114 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Cursor Movement}}  \tn
% Row 0
\SetRowColor{LightBackground}
`C` & Move one character forward. \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
{\emph{n}}`C` & Move {\emph{n}} characters forward. \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
`R` & Move one character backwards ({\emph{reverse}}). \tn 
% Row Count 4 (+ 2)
% Row 3
\SetRowColor{white}
{\emph{n}}`R` & Move {\emph{n}} characters backwards. \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
`W` & Move to the beginning of next word. \tn 
% Row Count 7 (+ 2)
% Row 5
\SetRowColor{white}
`L` & Move to the beginning of next line. \tn 
% Row Count 9 (+ 2)
% Row 6
\SetRowColor{LightBackground}
{\emph{n}}`L` & Move forward {\emph{n}} lines. \tn 
% Row Count 10 (+ 1)
% Row 7
\SetRowColor{white}
`0L` & Go to the beginning of the current line. \tn 
% Row Count 12 (+ 2)
% Row 8
\SetRowColor{LightBackground}
{\emph{n}}`B` & Move backwards {\emph{n}} lines. \tn 
% Row Count 13 (+ 1)
% Row 9
\SetRowColor{white}
`J`{\emph{n}}`L` & Go to line {\emph{n}}+1. \tn 
% Row Count 15 (+ 2)
% Row 10
\SetRowColor{LightBackground}
`J` & Jump to beginning of buffer. \tn 
% Row Count 16 (+ 1)
% Row 11
\SetRowColor{white}
{\emph{n}}`J` & Jump to character {\emph{n}}. \tn 
% Row Count 17 (+ 1)
% Row 12
\SetRowColor{LightBackground}
`ZJ` & Jump to end of buffer. \tn 
% Row Count 18 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{5.377cm}}{{\bf{Tip:}} Enable the `fnkeys.tes` module in `\textasciitilde{}/.teco-ini` to move around with cursor keys!}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.09494 cm} x{3.88206 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Text Deletion}}  \tn
% Row 0
\SetRowColor{LightBackground}
`D` & Delete next character. \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
{\emph{n}}`D` & Delete next {\emph{n}} characters. \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
`V` & Delete next word. \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
{\emph{n}}`V` & Delete next {\emph{n}} words. \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
{\emph{n}}`Y` & Delete previous {\emph{n}} words. \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
`FK`{\emph{LF}}`\$` & Delete remainder of line. \tn 
% Row Count 7 (+ 2)
% Row 6
\SetRowColor{LightBackground}
`K` & Kill (delete) from current position to beginning of next line. \tn 
% Row Count 9 (+ 2)
% Row 7
\SetRowColor{white}
`0K` & Kill (delete) to the beginning of line. \tn 
% Row Count 11 (+ 2)
% Row 8
\SetRowColor{LightBackground}
`0KK` & Delete entire line. \tn 
% Row Count 12 (+ 1)
% Row 9
\SetRowColor{white}
{\emph{n}}`K` & Kill (delete) next {\emph{n}} lines. \tn 
% Row Count 13 (+ 1)
% Row 10
\SetRowColor{LightBackground}
`HK` & Kill (delete) the whole buffer. \tn 
% Row Count 14 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}