Cheatography
https://cheatography.com
A cheat sheet for the MCO Tower position
Initial AltitudesTurbojet/Turboprop | At or below 5000 | Piston | At or below 2000 | | Closed Traffic | At or below 1500 R18R/36L |
MCO ATCT SOP (2.2.2, 2.3)
LOA Preferred RoutesWEST KATL | MATEO SHRKS LAIRI LARZZ JJEDI2 | EAST KATL | MATEO SHRKS LAIRI LARZZ SITTH2 | NRNAV KATL | ... SINCA6 | JET KCLT | GUANO FEMON Q87 VIYAP CHECR STOCR3 | NRNAV KCLT | GUANO FEMON JROSS FLO RASLN3 | JET KDCA | CHS J165 NKKIE WAVES CAPSS# | JALT KDCA | CHS J79 SBY LAFLN DEALE# | NRNAV KDCA | CHS V437 FLO V157 FAY RIC IRONS# | JET KIAD | J207 RDU BZNGA DORRN CAVLR# | JALT KIAD | J207 RDU DORRN WIGOL# | NRNAV KIAD | J207 RDU FAK COATT# | JET KBWI | J79 TYI THHMP RAVNN# | JALT KBWI | TYI J40 JAGEM THHMP RAVNN# | NRNAV KBWI | RIC RIPKN# |
| | Departure HeadingsTurbojet/Turboprop
| R18L/R | CAMDT/KLMAN/JAG | H205 | | MCOY/ATLAS/WORMS | H140 | R17L/R | CAMDT/KLMAN/JAG | H220 | | MCOY/ATLAS/WORMS | H160 | R36L/R | CAMDT/KLMAN | H340-010 | | ATLAS | H060 | | WORMS/JAG/MCOY | H010 | R35L/R | CAMDT/KLMAN | H340-010 | | ATLAS | H060 | | WORMS/JAG/MCOY | H020-040 | | Piston
| All RWYs | (NW) VIZTA | H270 | | (SW) KLMAN | H270 | | (SW) KNEED | H270 | | (SE) TPSTR | H090 | | (N) WORMS | H270 |
Go-around/Missed Approach/Practice ApproachAssign runway heading, and climb to 3,000. Handoff as soon as practical to the appropriate departure controller. |
MCO ATCT SOP (4.10) LC must coordinate before freq. handoff.
| | Runway SelectionEast Ops TWind < 7kts | Departing 18L/17R | Landing 18R/17L | West Ops | Departing 36R/35L | Landing 36L/35R |
Runway Change Checklist1. | Notify TRACON of the new runway configuration, and last departure and arrivals. | 2. | When notified by TRACON, stop all departures on the present configuration. | 3. | Notify GND of the new runway config and divert all departures to the new runways. | 4. | When TRACON is ready for the new config, TRACON will notify LC. Upon completion of notification, departures may resume with the new configuration | 5. | Ensure ATIS has been updated to reflect the new configuration. |
MCO ATCT SOP (4.3) When changing runways, LC must verbally coordinate with the appropriate TRACON position(s). LC: coordinate last departure off the previous runway and first off new runway. TRACON: coordinate last arrival on previous runway, and first on new runway.
|
Created By
Metadata
Comments
No comments yet. Add yours below!
Add a Comment