Show Menu
Cheatography
  1. Home >
  2. Games and Hobbies >

Ducky mecha mini Cheat Sheet (DRAFT) by

Ducky mecha mini shortcut keys cheat sheet

This is a draft cheat sheet. It is a work in progress and is not finished yet.

Backli­­ghting modes

Fn+Alt+T
Wave (Default)
Color Cycle
Rain Drop
Ripple
Random Reactive
Reactive *
Halo *
Breathe *
100% Full Backlit *
Radar *
Backlit off
Fn+Alt+J
Fn+Alt+L
Decrease speed
Increase speed
Fn+Alt+T
Hold for 3 seconds to turn off all backlit

Fn+Alt+Z
Fn+Alt+X
Fn+Alt+C
Fn+Alt+V
Fn+Alt+ Spacebar
* can be changed
Adjust color red (R) brightness.
Adjust color green (G) brightness.
Adjust color blue (B) brightness.
Erase color setting.
Activate color palette to display various colors on each key, press on the desired color, all the keys will automa­tically change to match.
 

RGB LED Zone Custom­ization Modes

Fn+Alt+G
CM1 cycle:
First step: Turn on user’s customized zone and color.
Second step: Turn on user’s customized zone and color in breathe mode.
Third step: Turn off CM1.
Fn+Alt+B
CM2 cycle: See CM1 cycle
Fn+Alt+ CapsLock (REC)
Press for 3 seconds until the G (CM1) and B (CM2) keys light up, choose the layer for setting, press it again and start recording.
CapsLock+Z
Adjust color red (R)
CapsLock+X
Adjust color green (G)
CapsLock+C
Adjust color blue (B),
CapsLock+V
Erase all LED light
CapsLock+ Spacebar
Color palette
CapsLock+ LeftShift
REC over, finish recording
Recording steps:
1 Press Fn+Alt­+Ca­pLock 3 seconds, press G to set CM1 and press B to set CM2.
2 CapLock will display current LED color. Color can be adjusted by CapLoc­k+Z­/X/C/V. After setting color, hitting any key on the keyboard will set that key to the selected color.
3 Repeating the above steps
4 Press CapLoc­k+L­eft­Shift to finish recording.
  

Mouse mode

Fn+W
Mouse up
Fn+A
Mouse left
Fn+S
Mouse down
Fn+D
Mouse right
Fn+Q
Left moude button
Fn+E
Right mouse button
Fn+R
Scroll up
Fn+F
Scroll down

Mech­anical shaft debounce time

Fn+Alt+Y
5ms
Fn+Alt+U
10ms (default)
Fn+Alt+I
15ms
Fn+Alt+O
25ms
● Hold the combine keys for 3 sec, the keyboard will flash 3 times to indicate the debounce time has been switched succes­sfully.
● The method is to adjust the debounce time of the metal shrapnel in the mechanical shaft during the pressing process. The shorter the time, the sooner it can be triggered, but if the time is too short may cause misjud­gement.