\documentclass[10pt,a4paper]{article} % Packages \usepackage{fancyhdr} % For header and footer \usepackage{multicol} % Allows multicols in tables \usepackage{tabularx} % Intelligent column widths \usepackage{tabulary} % Used in header and footer \usepackage{hhline} % Border under tables \usepackage{graphicx} % For images \usepackage{xcolor} % For hex colours %\usepackage[utf8x]{inputenc} % For unicode character support \usepackage[T1]{fontenc} % Without this we get weird character replacements \usepackage{colortbl} % For coloured tables \usepackage{setspace} % For line height \usepackage{lastpage} % Needed for total page number \usepackage{seqsplit} % Splits long words. %\usepackage{opensans} % Can't make this work so far. Shame. Would be lovely. \usepackage[normalem]{ulem} % For underlining links % Most of the following are not required for the majority % of cheat sheets but are needed for some symbol support. \usepackage{amsmath} % Symbols \usepackage{MnSymbol} % Symbols \usepackage{wasysym} % Symbols %\usepackage[english,german,french,spanish,italian]{babel} % Languages % Document Info \author{wvbalan} \pdfinfo{ /Title (avpn.pdf) /Creator (Cheatography) /Author (wvbalan) /Subject (avpn Cheat Sheet) } % Lengths and widths \addtolength{\textwidth}{6cm} \addtolength{\textheight}{-1cm} \addtolength{\hoffset}{-3cm} \addtolength{\voffset}{-2cm} \setlength{\tabcolsep}{0.2cm} % Space between columns \setlength{\headsep}{-12pt} % Reduce space between header and content \setlength{\headheight}{85pt} % If less, LaTeX automatically increases it \renewcommand{\footrulewidth}{0pt} % Remove footer line \renewcommand{\headrulewidth}{0pt} % Remove header line \renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit % This two commands together give roughly % the right line height in the tables \renewcommand{\arraystretch}{1.3} \onehalfspacing % Commands \newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour \newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols \newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns \newcommand{\tn}{\tabularnewline} % Required as custom column type in use % Font and Colours \definecolor{HeadBackground}{HTML}{333333} \definecolor{FootBackground}{HTML}{666666} \definecolor{TextColor}{HTML}{333333} \definecolor{DarkBackground}{HTML}{A3A3A3} \definecolor{LightBackground}{HTML}{F3F3F3} \renewcommand{\familydefault}{\sfdefault} \color{TextColor} % Header and Footer \pagestyle{fancy} \fancyhead{} % Set header to blank \fancyfoot{} % Set footer to blank \fancyhead[L]{ \noindent \begin{multicols}{3} \begin{tabulary}{5.8cm}{C} \SetRowColor{DarkBackground} \vspace{-7pt} {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}} } \end{tabulary} \columnbreak \begin{tabulary}{11cm}{L} \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{avpn Cheat Sheet}}}} \\ \normalsize{by \textcolor{DarkBackground}{wvbalan} via \textcolor{DarkBackground}{\uline{cheatography.com/122406/cs/22722/}}} \end{tabulary} \end{multicols}} \fancyfoot[L]{ \footnotesize \noindent \begin{multicols}{3} \begin{tabulary}{5.8cm}{LL} \SetRowColor{FootBackground} \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}} \\ \vspace{-2pt}wvbalan \\ \uline{cheatography.com/wvbalan} \\ \end{tabulary} \vfill \columnbreak \begin{tabulary}{5.8cm}{L} \SetRowColor{FootBackground} \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}} \\ \vspace{-2pt}Not Yet Published.\\ Updated 9th May, 2020.\\ Page {\thepage} of \pageref{LastPage}. \end{tabulary} \vfill \columnbreak \begin{tabulary}{5.8cm}{L} \SetRowColor{FootBackground} \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}} \\ \SetRowColor{white} \vspace{-5pt} %\includegraphics[width=48px,height=48px]{dave.jpeg} Measure your website readability!\\ www.readability-score.com \end{tabulary} \end{multicols}} \begin{document} \raggedright \raggedcolumns % Set font size to small. Switch to any value % from this page to resize cheat sheet text: % www.emerson.emory.edu/services/latex/latex_169.html \footnotesize % Small font. \begin{multicols*}{4} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Service Overview}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{Service Overview \newline % Row Count 1 (+ 1) A. AT\&T VPN Service Options \& Value Proposition: \newline % Row Count 2 (+ 1) (a) AVPN is a single MPLS VPN service with multiple CPE management options: \newline % Row Count 4 (+ 2) AVPN Transport (Customer manages premises CPE) \newline % Row Count 6 (+ 2) AVPN Transport \& Lite Managed Router \newline % Row Count 7 (+ 1) AVPN Transport \& Managed Router \newline % Row Count 8 (+ 1) Support for hybrid networks (mix of managed and unmanaged options in a single contract) \newline % Row Count 10 (+ 2) • Enables customer to select management option they desire on a site-by-site basis \newline % Row Count 12 (+ 2) • Enables the customer to move up and down the management continuum as their requirements dictate \newline % Row Count 14 (+ 2) B. Bandwidth / Protocol Options: \newline % Row Count 15 (+ 1) IP Ports (PPP, MLPPP, FR Encap): up to 622M \newline % Row Count 16 (+ 1) a. Fractional T1, only in case of E2A migration \newline % Row Count 17 (+ 1) b. NxT1 (up to 8) \newline % Row Count 18 (+ 1) c. Sub-rate T3, Full T3, sub-rate OC3 / STM12 \newline % Row Count 19 (+ 1) d. Ethernet (Shared and Dedicated): up to 1G \newline % Row Count 20 (+ 1) C. Managed Router Options AT\&T owned, Third party supplier owned: if the pricing is ICB, follow the process in the Sales One International Countries job aid to get approval and router / router feature pricing, Customer "must" own -no longer available but may be ordered through custom to support Customers \newline % Row Count 27 (+ 7) D. Lite Managed Routers: For customers who do not need the full management option and are looking for a lower price point, Lite Managed Routers have 8 hours a day, 5 days a week, Next Business Day parts only support, where Managed Routers have 24 hours a day, 7 days a week, 4 hour onsite parts and AT\&T tech support, Customer needs to have a person on site that can receipt replacement hardware and install same; which might include opening the router chassis and installing a replacement card or memory stick% Row Count 38 (+ 11) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Service Overview} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{COS Package Profile - 4CoS}} \tn \SetRowColor{LightBackground} \mymulticolumn{1}{p{3.833cm}}{\vspace{1px}\centerline{\includegraphics[width=5.1cm]{/web/www.cheatography.com/public/uploads/wvbalan_1589004263_cos.png}}} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{CoS Packages/Profiles for AVPN :}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{Customer can also select 'Standard Data' – No CoS (no additional charge) \newline % Row Count 2 (+ 2) • Based on CoS package selected, Customer is entitled to select from various CoS profiles (or CoS bandwidth \%'s) \newline % Row Count 5 (+ 3) o Profiles available vary based on whether customer choses 4CoS or 6CoS model \newline % Row Count 7 (+ 2) • 6CoS model provides for use of two additional data classes (CoS 2v and CoS5) and more granular bandwidth \newline % Row Count 10 (+ 3) • 6CoS Classes \newline % Row Count 11 (+ 1) o CoS1: Designed for jitter- and latency-sensitive applications like voice and video. \newline % Row Count 13 (+ 2) o CoS2v: designed to carry very high priority business applications (e.g., Citrix) or jitter-sensitive applications like video when CoS1 is already in use. \newline % Row Count 17 (+ 4) o CoS2: Designed to carry high priority business applications (e.g., Sap, Oracle) \newline % Row Count 19 (+ 2) o CoS3: Designed to carry medium priority business applications (e.g., http) \newline % Row Count 21 (+ 2) o CoS4: Designed to carry low priority business applications (e.g., email, ftp) and is used as the default setting if no CoS is chosen. \newline % Row Count 24 (+ 3) o CoS5: Designed to carry low priority background business applications or it can be used as Scavenger (only competes with other classes for unused bandwidth) \newline % Row Count 28 (+ 4) Bandwidth is then allocated per logical channel based on CoS profile/bandwidth allocation selected% Row Count 31 (+ 3) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{CoS Packages/Profiles for AVPN :} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Port Level Cos on the PE and CE side}} \tn \SetRowColor{LightBackground} \mymulticolumn{1}{p{3.833cm}}{\vspace{1px}\centerline{\includegraphics[width=5.1cm]{/web/www.cheatography.com/public/uploads/wvbalan_1589004727_port level.png}}} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Port Level Cos on the PE and CE side} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Logical Level CoS – CE side}} \tn \SetRowColor{LightBackground} \mymulticolumn{1}{p{3.833cm}}{\vspace{1px}\centerline{\includegraphics[width=5.1cm]{/web/www.cheatography.com/public/uploads/wvbalan_1589004554_logic channel.png}}} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Logical Level CoS – CE side} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Resiliency Options:-}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{Single CE, Dual Access lines, Primary/Backup \newline % Row Count 1 (+ 1) Single CE Dual Access lines, Load Sharing \newline % Row Count 2 (+ 1) Dual CE, Dual Access, Primary/Backup \newline % Row Count 3 (+ 1) Dual CE, Dual Access, Load Sharing \newline % Row Count 4 (+ 1) Resiliency Options – ANIRA / AVTS Service Interworking (SIW) \newline % Row Count 6 (+ 2) Load sharing links must be same port type, speed, and CoS \newline % Row Count 8 (+ 2) Primary and backup links can be different port speed and CoS. Backup PORT speed must be at least 50\% of the PORT bandwidth of the primary link.% Row Count 11 (+ 3) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Resiliency Options} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Diversity (POP and Switch):}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{(1) MPLS Port Switch Diversity Option (custom in MOW) \newline % Row Count 2 (+ 2) A. Ports are provisioned on diverse switches within the same POP \newline % Row Count 4 (+ 2) B. Customer defines diversity groups – places ports in those Groups. \newline % Row Count 6 (+ 2) C. AT\&T ensures diversity. \newline % Row Count 7 (+ 1) (2) MPLS Port POP Diversity \newline % Row Count 8 (+ 1) A. Ports are provisioned on diverse switches/PE's in diverse POP's \newline % Row Count 10 (+ 2) B. Customer defines PoP Diversity groups – places ports in those Groups. AT\&T ensures diversity. \newline % Row Count 12 (+ 2) C. See FAQ on OIL for a complete description of Diversity:% Row Count 14 (+ 2) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Diversity (POP and Switch):} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Unlink :}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{A. Unilink is supported on all FR IP ports T3 \& above supported with FR encapsulation format only \newline % Row Count 2 (+ 2) B. Up to 12 Logical Channels for POS/FrEncap/ATM/Ethernet Ports \newline % Row Count 4 (+ 2) C. Note: In case of ASE Ethernet access with 1000BT (Electrical/Copper interface) only a MAX of 8 Logical channels are supported. \newline % Row Count 7 (+ 3) D. All routes terminate on single routing table in customer CE \newline % Row Count 9 (+ 2) E. VRF-Lite (aka MPLS in a box) support with Unilink is available% Row Count 11 (+ 2) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Unlink :} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Other Supported Features:}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{a) MD5 \newline % Row Count 1 (+ 1) b) BGP-R \newline % Row Count 2 (+ 1) c) LAN-BFD \newline % Row Count 3 (+ 1) d) Flat-Rate Billing and Usage Based Billing (UBB) options \newline % Row Count 5 (+ 2) e) Hub and Spoke \newline % Row Count 6 (+ 1) f) Cascaded Router Support \newline % Row Count 7 (+ 1) g) Routing Restriction% Row Count 8 (+ 1) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Other Supported Features:} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Handling Disco/Return IP address task:}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{Return IP address is before TTU and Disco IP address if after TTU so only Disco you need to create Adhoc task for IP provider and US ip Provider since lot of stuff to validate before we release the IP address.% Row Count 5 (+ 5) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Handling Disco/Return IP address task:} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Technical Notes}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{1. First ask customer if you're migrating from existing service or if this is LAN activation for brand new site. \newline % Row Count 3 (+ 3) 2. IP addresses and masks with customer. Compare LAN IPs, LAN helper IPs, standby IPs (will get to this later), DUPLEX/SPEED. \newline % Row Count 6 (+ 3) 3. Routing protocol parameters (OSPF, EIGRP,BGP) \newline % Row Count 7 (+ 1) 4. Monitoring protocols (SNMP, Netflow) \newline % Row Count 8 (+ 1) 5. Standby protocol and standby parameters. check if you have correct standby protocol configured for your backup solution. You can have one of 3 types of standby protocols – depends on your backup solution. \newline % Row Count 13 (+ 5) 6. VRRP – Virtual Router Redundancy Protocol – used when your backup solution is ANIRA (NETGATE). \newline % Row Count 16 (+ 3) 7. HSRP – Hot Standby Router Protocol – used for any other backup solution – dual AVPN/EVPN routers, AVTS router as a backup, ANIRA (CISCO) \newline % Row Count 19 (+ 3) 8. For HSRP you can check standby IP address, standby version, standby group and priorities. \newline % Row Count 21 (+ 2) 9. If the Data and Voice Migration (BVoIP) need to migrate at the same time (single LAN Migration Window), then inform to OM to get BVOIP team engaged accordingly% Row Count 25 (+ 4) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Technical Notes} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{LE to PE notes:-}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{Customer: DSPA / ABC \newline % Row Count 1 (+ 1) Order: ISR20050739350 \newline % Row Count 2 (+ 1) Site: Singapore, Singapore \newline % Row Count 3 (+ 1) Resiliency: No resiliency \newline % Row Count 4 (+ 1) -{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-- \newline % Row Count 6 (+ 2) Reassign 'Build CER Enhanced Config' task to LE? NO \newline % Row Count 8 (+ 2) Traffic Classification: DSPA\_TC702 \newline % Row Count 9 (+ 1) BFD Required? NO \newline % Row Count 10 (+ 1) OOB Connection: POTS / ANALOG LINE \newline % Row Count 11 (+ 1) SAA Probe Required? YES \newline % Row Count 12 (+ 1) Responder Site ID: EIDNASHVA \newline % Row Count 13 (+ 1) Responder Hostname/Loopback: TBD 32.245.178.23 \newline % Row Count 14 (+ 1) Probe Type: \seqsplit{SAA\_1J\_2U\_2VJ\_3U\_4U\_5U} \newline % Row Count 16 (+ 2) Responder Site ID: EIDNASHVA \newline % Row Count 17 (+ 1) Responder Hostname/Loopback: TBD 32.245.180.154 \newline % Row Count 18 (+ 1) Probe Type: \seqsplit{SAA\_1J\_2U\_2VJ\_3U\_4U\_5U} \newline % Row Count 20 (+ 2) -{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-{}-- \newline % Row Count 22 (+ 2) Additional instructions: \newline % Row Count 23 (+ 1) - Order features: Dual Stack IPv4/IPv6 \newline % Row Count 24 (+ 1) Create technical notes :-% Row Count 25 (+ 1) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{LE to PE notes:-} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Tools Used}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{Follow the description of all the systems and tools required to an Engineer in order to perform LE activities. \newline % Row Count 3 (+ 3) - EFMS – workflow system with tasks \& tracking order progress \newline % Row Count 5 (+ 2) - GIOM-For technical order entry into systems \newline % Row Count 6 (+ 1) - Pollers – jumpservers that allow access CE Router \newline % Row Count 8 (+ 2) - Action – operations tool to get all information about routers and customer \newline % Row Count 10 (+ 2) - IPSA and PAL – to configure QOS.( For QOS configuration design) \newline % Row Count 12 (+ 2) - Rapido – to create basic and enhanced configs + lan migration \newline % Row Count 14 (+ 2) - NC3 – a complete database of the site, inventory tool for validation and updating \newline % Row Count 16 (+ 2) - ICORE– backbone tools \newline % Row Count 17 (+ 1) - IGLOO – access and telco information for circuits \newline % Row Count 19 (+ 2) - GRDB – Global Resource Database (For verifying existing customer network) \newline % Row Count 21 (+ 2) - PCS Homer – Post Customer Signature (PCS) / Custom Contract Status Tool \newline % Row Count 23 (+ 2) - One-Off Lists – BET (EVPN/AVPN Availability Matrix) \newline % Row Count 25 (+ 2) - ETG- For equipment ordering \& service/feature implementations% Row Count 27 (+ 2) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Tools Used} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{RDS}} \tn \SetRowColor{LightBackground} \mymulticolumn{1}{p{3.833cm}}{\vspace{1px}\centerline{\includegraphics[width=5.1cm]{/web/www.cheatography.com/public/uploads/wvbalan_1589005365_RDS.PNG}}} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{RDS} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{RDS Validation:}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{A) FMO RDS \newline % Row Count 1 (+ 1) B) PMO RDS \newline % Row Count 2 (+ 1) C) Order Types (AVPN , VVBE, VVB, PMAC) \newline % Row Count 3 (+ 1) D) VPNs (PNT , EVPN , AVPN) \newline % Row Count 4 (+ 1) E) Parameters to validate% Row Count 5 (+ 1) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{RDS Validation:} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{AVPN Managed Out Of Band (OOB) Connection Options:}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{A. POTS (AT\&T provides POTS modem \& Customer provides POTS Line connection) \newline % Row Count 2 (+ 2) B. WOOB (AT\&T provides Wireless Modem \& provides Wireless connection, Available in 55+ countries)% Row Count 4 (+ 2) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{AVPN Managed Out Of Band (OOB) Connection Options:} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Router packages are supported}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{Router Package Size and configurations depend on Access Type, Access Speed, Port Speed, Class of Service 1\% (Real Time Traffic performance Need) and the physical interface type at the installation location. Use ASAP/ADOPT/ROME tool to select the correct router model for a given location. System Rules guide you and select the default router. You can go to the next higher available router, if needed. \newline % Row Count 9 (+ 9) • AVPN Equipment spreadsheet \newline % Row Count 11 (+ 2) A. Very Basic \newline % Row Count 12 (+ 1) B. Basic \newline % Row Count 13 (+ 1) C. Small \newline % Row Count 14 (+ 1) D. Medium \newline % Row Count 15 (+ 1) E. Large \newline % Row Count 16 (+ 1) F. XLarge \newline % Row Count 17 (+ 1) G. Xlarge+ \newline % Row Count 18 (+ 1) H. XXL% Row Count 19 (+ 1) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Router packages are supported} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Service Interoperability (SIO) Options:}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{Provides site interoperability between PNT sites (managed and unmanaged) and AVPN sites (managed and unmanaged)% Row Count 3 (+ 3) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Service Interoperability (SIO) Options:} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{BFD}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{BFD sends small, periodic heartbeat messages used to detect forwarding issues between the AVPN service edge (PE) and the customer router across either an IP or Ethernet circuit. It allows for fast detection of a circuit problem, so that the traffic can be re-routed over a backup link quickly. BFD is supported on Ethernet and IP ports on IPv4% Row Count 7 (+ 7) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{BFD} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Routes Groups}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{Provides ability to share routing policies amongst a group of customer sites, e.g., selection of different internal Internet Gateway sites for specific subsets of remote sites.% Row Count 4 (+ 4) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Routes Groups} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Multicast}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{Multicast Feature Support –Depends on Transport availability% Row Count 2 (+ 2) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Multicast} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{PAL TC: (Ip handling, BVOIP, MC, COS model)}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{1. TC is not in PAL database \newline % Row Count 1 (+ 1) 2. TC mismatch in PAL for Address mode; Catch-all; Fragments; Service; GRUA; TC number; Domain/Region \newline % Row Count 4 (+ 3) 3. TC mismatch in PAL for COS model (if COS4 or COS 6) \newline % Row Count 6 (+ 2) 4. TC excludes Multicast \newline % Row Count 7 (+ 1) 5. TC excludes BVOIP% Row Count 8 (+ 1) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{PAL TC: (Ip handling, BVOIP, MC, COS model)} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{General Gaps:}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{1. TC`s are faulty, missing, not complete (see more details above) \newline % Row Count 2 (+ 2) 2. AVPN LM (E2A)  the existing setup is not reviewed before the migration (EVPN, PNT or AVPN sites) = should not be reviewed prior to the TTU or during the RDS validation??, \newline % Row Count 6 (+ 4) i. Therefore, features are incorrect as: BGP AS, routing, IP addresses, COS profile, incorrect VPN is assigned etc. \newline % Row Count 9 (+ 3) ii. or we are missing components on the new installation due to this: an additional lan port, Voice card, NBFW, PNT SIO etc. \newline % Row Count 12 (+ 3) 3. VPN Name , GRUA mismatch \newline % Row Count 13 (+ 1) 4. IP addresses are assigned from an incorrect region. \newline % Row Count 15 (+ 2) 5. SAA HUB and SPOKE are in a different VPN , reporting won't work. \newline % Row Count 17 (+ 2) 6. MIAB config is missing before the TTU. \newline % Row Count 18 (+ 1) 7. Often customer expects a DATA+VOICE migration, however only our DATA team is on the call  \newline % Row Count 20 (+ 2) i. If we migrate from an old/existing service where DATA+VOICE migration is needed in the same time how this is coordinated? Is LE responsible to provide info to MSIM about the solution?% Row Count 24 (+ 4) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{General Gaps:} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Best Practices: -}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{8. Ensure to Provide correct TC for the site in LE to PE notes. \newline % Row Count 2 (+ 2) 9. Ensure to review the existing setup for Upgrade and Migrating sites (E2A or PNT to AVPN sites) for No. of LAN Ports used on old router and Services like BVOIP and NBFW. \newline % Row Count 6 (+ 4) 10. Review the VPN Name, GRUA and notify the requester upfront where necessary to avoid correction MACD's. \newline % Row Count 9 (+ 3) 11. Review that SAA HUB and SPOKE are in same VPN, to ensure reachability. \newline % Row Count 11 (+ 2) 12. Ensure to add note to the PE for creating ad-hoc task for providing MIAB config before the TTU schedule and on receiving the task, upload VRF Lite configs ASAP. \newline % Row Count 15 (+ 4) 13. Ensure to Review and provide note to OM/DTAC whether it is VOICE only or DATA+VOICE migration% Row Count 17 (+ 2) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Best Practices: -} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} \begin{tabularx}{3.833cm}{X} \SetRowColor{DarkBackground} \mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Questions to ask yourself}} \tn \SetRowColor{white} \mymulticolumn{1}{x{3.833cm}}{1) Do I know why I am doing the work? \newline % Row Count 1 (+ 1) 2) Have I identified and notified everybody (customers and internal groups Domestic and MOW) who will be directly involved or affected by this work? \newline % Row Count 4 (+ 3) 3) Can I prevent or control service interruption? \newline % Row Count 6 (+ 2) 4) When is the right time to do the work? \newline % Row Count 7 (+ 1) 5) Am I trained and qualified to do this work? \newline % Row Count 8 (+ 1) 6) Are the work request orders and supporting documentation current and error free? \newline % Row Count 10 (+ 2) 7) Do I have an implementation plan? Have I walked through the procedure with the customer? \newline % Row Count 12 (+ 2) 8) Do I have a test plan to verify my changes? \newline % Row Count 13 (+ 1) 9) Do I have a back out plan? Do I have everything I need to quickly restore service if something goes wrong?% Row Count 16 (+ 3) } \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \SetRowColor{LightBackground} \mymulticolumn{1}{x{3.833cm}}{Questions to ask yourself} \tn \hhline{>{\arrayrulecolor{DarkBackground}}-} \end{tabularx} \par\addvspace{1.3em} % That's all folks \end{multicols*} \end{document}