\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{vutentbrannt}
\pdfinfo{
  /Title (jupyter-notebook.pdf)
  /Creator (Cheatography)
  /Author (vutentbrannt)
  /Subject (Jupyter Notebook Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{A3A3A3}
\definecolor{LightBackground}{HTML}{F3F3F3}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Jupyter Notebook Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{vutentbrannt} via \textcolor{DarkBackground}{\uline{cheatography.com/106063/cs/21408/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}vutentbrannt \\
  \uline{cheatography.com/vutentbrannt} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 15th December, 2019.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{x{1.84 cm} x{6.16 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Command Mode}}  \tn
% Row 0
\SetRowColor{LightBackground}
F & find and replace \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\seqsplit{Ctrl-Shift-F} & open the command palette \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{Ctrl-Shift-P} & open the command palette \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
Enter & enter edit mode \tn 
% Row Count 6 (+ 1)
% Row 4
\SetRowColor{LightBackground}
P & open the command palette \tn 
% Row Count 7 (+ 1)
% Row 5
\SetRowColor{white}
\seqsplit{Shift-Enter} & run cell, select below \tn 
% Row Count 9 (+ 2)
% Row 6
\SetRowColor{LightBackground}
\seqsplit{Ctrl-Enter} & run selected cells \tn 
% Row Count 11 (+ 2)
% Row 7
\SetRowColor{white}
\seqsplit{Alt-Enter} & run cell and insert below \tn 
% Row Count 12 (+ 1)
% Row 8
\SetRowColor{LightBackground}
Y & change cell to code \tn 
% Row Count 13 (+ 1)
% Row 9
\SetRowColor{white}
M & change cell to markdown \tn 
% Row Count 14 (+ 1)
% Row 10
\SetRowColor{LightBackground}
R & change cell to raw \tn 
% Row Count 15 (+ 1)
% Row 11
\SetRowColor{white}
1 & change cell to heading 1 \tn 
% Row Count 16 (+ 1)
% Row 12
\SetRowColor{LightBackground}
2 & change cell to heading 2 \tn 
% Row Count 17 (+ 1)
% Row 13
\SetRowColor{white}
3 & change cell to heading 3 \tn 
% Row Count 18 (+ 1)
% Row 14
\SetRowColor{LightBackground}
4 & change cell to heading 4 \tn 
% Row Count 19 (+ 1)
% Row 15
\SetRowColor{white}
5 & change cell to heading 5 \tn 
% Row Count 20 (+ 1)
% Row 16
\SetRowColor{LightBackground}
6 & change cell to heading 6 \tn 
% Row Count 21 (+ 1)
% Row 17
\SetRowColor{white}
K & select cell above \tn 
% Row Count 22 (+ 1)
% Row 18
\SetRowColor{LightBackground}
Up & select cell above \tn 
% Row Count 23 (+ 1)
% Row 19
\SetRowColor{white}
Down & select cell below \tn 
% Row Count 24 (+ 1)
% Row 20
\SetRowColor{LightBackground}
J & select cell below \tn 
% Row Count 25 (+ 1)
% Row 21
\SetRowColor{white}
Shift-K & extend selected cells above \tn 
% Row Count 26 (+ 1)
% Row 22
\SetRowColor{LightBackground}
Shift-Up & extend selected cells above \tn 
% Row Count 27 (+ 1)
% Row 23
\SetRowColor{white}
\seqsplit{Shift-Down} & extend selected cells below \tn 
% Row Count 29 (+ 2)
% Row 24
\SetRowColor{LightBackground}
Shift-J & extend selected cells below \tn 
% Row Count 30 (+ 1)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{8.4cm}{x{1.84 cm} x{6.16 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Command Mode (cont)}}  \tn
% Row 25
\SetRowColor{LightBackground}
A & insert cell above \tn 
% Row Count 1 (+ 1)
% Row 26
\SetRowColor{white}
B & insert cell below \tn 
% Row Count 2 (+ 1)
% Row 27
\SetRowColor{LightBackground}
X & cut selected cells \tn 
% Row Count 3 (+ 1)
% Row 28
\SetRowColor{white}
C & copy selected cells \tn 
% Row Count 4 (+ 1)
% Row 29
\SetRowColor{LightBackground}
Shift-V & paste cells above \tn 
% Row Count 5 (+ 1)
% Row 30
\SetRowColor{white}
V & paste cells below \tn 
% Row Count 6 (+ 1)
% Row 31
\SetRowColor{LightBackground}
Z & undo cell deletion \tn 
% Row Count 7 (+ 1)
% Row 32
\SetRowColor{white}
D,D & delete selected cells \tn 
% Row Count 8 (+ 1)
% Row 33
\SetRowColor{LightBackground}
Shift-M & merge selected cells, or current cell with cell below if only one cell is selected \tn 
% Row Count 11 (+ 3)
% Row 34
\SetRowColor{white}
Ctrl-S & Save and Checkpoint \tn 
% Row Count 12 (+ 1)
% Row 35
\SetRowColor{LightBackground}
S & Save and Checkpoint \tn 
% Row Count 13 (+ 1)
% Row 36
\SetRowColor{white}
L & toggle line numbers \tn 
% Row Count 14 (+ 1)
% Row 37
\SetRowColor{LightBackground}
O & toggle output of selected cells \tn 
% Row Count 16 (+ 2)
% Row 38
\SetRowColor{white}
Shift-O & toggle output scrolling of selected cells \tn 
% Row Count 18 (+ 2)
% Row 39
\SetRowColor{LightBackground}
H & show keyboard shortcuts \tn 
% Row Count 19 (+ 1)
% Row 40
\SetRowColor{white}
I,I & interrupt the kernel \tn 
% Row Count 20 (+ 1)
% Row 41
\SetRowColor{LightBackground}
0,0 & restart the kernel (with dialog) \tn 
% Row Count 22 (+ 2)
% Row 42
\SetRowColor{white}
Esc & close the pager \tn 
% Row Count 23 (+ 1)
% Row 43
\SetRowColor{LightBackground}
Q & close the pager \tn 
% Row Count 24 (+ 1)
% Row 44
\SetRowColor{white}
Shift-L & toggles line numbers in all cells, and persist the setting \tn 
% Row Count 26 (+ 2)
% Row 45
\SetRowColor{LightBackground}
\seqsplit{Shift-Space} & scroll notebook up \tn 
% Row Count 28 (+ 2)
% Row 46
\SetRowColor{white}
Space & scroll notebook down \tn 
% Row Count 29 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.12 cm} x{4.88 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Edit Mode}}  \tn
% Row 0
\SetRowColor{LightBackground}
Tab & code completion or indent \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
Shift-Tab & tooltip \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
Ctrl-{]} & indent \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
Ctrl-{[} & dedent \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
Ctrl-A & select all \tn 
% Row Count 6 (+ 1)
% Row 5
\SetRowColor{white}
Ctrl-Z & undo \tn 
% Row Count 7 (+ 1)
% Row 6
\SetRowColor{LightBackground}
Ctrl-/ & comment \tn 
% Row Count 8 (+ 1)
% Row 7
\SetRowColor{white}
Ctrl-D & delete whole line \tn 
% Row Count 9 (+ 1)
% Row 8
\SetRowColor{LightBackground}
Ctrl-U & undo selection \tn 
% Row Count 10 (+ 1)
% Row 9
\SetRowColor{white}
Insert & toggle overwrite flag \tn 
% Row Count 11 (+ 1)
% Row 10
\SetRowColor{LightBackground}
Ctrl-Home & go to cell start \tn 
% Row Count 12 (+ 1)
% Row 11
\SetRowColor{white}
Ctrl-Up & go to cell start \tn 
% Row Count 13 (+ 1)
% Row 12
\SetRowColor{LightBackground}
Ctrl-End & go to cell end \tn 
% Row Count 14 (+ 1)
% Row 13
\SetRowColor{white}
Ctrl-Down & go to cell end \tn 
% Row Count 15 (+ 1)
% Row 14
\SetRowColor{LightBackground}
Ctrl-Left & go one word left \tn 
% Row Count 16 (+ 1)
% Row 15
\SetRowColor{white}
Ctrl-Right & go one word right \tn 
% Row Count 17 (+ 1)
% Row 16
\SetRowColor{LightBackground}
Ctrl-Backspace & delete word before \tn 
% Row Count 18 (+ 1)
% Row 17
\SetRowColor{white}
Ctrl-Delete & delete word after \tn 
% Row Count 19 (+ 1)
% Row 18
\SetRowColor{LightBackground}
Ctrl-Y & redo \tn 
% Row Count 20 (+ 1)
% Row 19
\SetRowColor{white}
Alt-U & redo selection \tn 
% Row Count 21 (+ 1)
% Row 20
\SetRowColor{LightBackground}
Ctrl-M & enter command mode \tn 
% Row Count 22 (+ 1)
% Row 21
\SetRowColor{white}
Ctrl-Shift-F & open the command palette \tn 
% Row Count 24 (+ 2)
% Row 22
\SetRowColor{LightBackground}
Ctrl-Shift-P & open the command palette \tn 
% Row Count 26 (+ 2)
% Row 23
\SetRowColor{white}
Esc & enter command mode \tn 
% Row Count 27 (+ 1)
% Row 24
\SetRowColor{LightBackground}
Shift-Enter & run cell, select below \tn 
% Row Count 28 (+ 1)
% Row 25
\SetRowColor{white}
Ctrl-Enter & run selected cells \tn 
% Row Count 29 (+ 1)
% Row 26
\SetRowColor{LightBackground}
Alt-Enter & run cell and insert below \tn 
% Row Count 31 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{8.4cm}{x{3.12 cm} x{4.88 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Edit Mode (cont)}}  \tn
% Row 27
\SetRowColor{LightBackground}
\seqsplit{Ctrl-Shift-Minus} & split cell at cursor \tn 
% Row Count 2 (+ 2)
% Row 28
\SetRowColor{white}
Ctrl-S & Save and Checkpoint \tn 
% Row Count 3 (+ 1)
% Row 29
\SetRowColor{LightBackground}
Down & move cursor down \tn 
% Row Count 4 (+ 1)
% Row 30
\SetRowColor{white}
Up & move cursor up \tn 
% Row Count 5 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}