\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{River L. (Tamaranth)}
\pdfinfo{
  /Title (cisco-device-configuration-commands-net-126.pdf)
  /Creator (Cheatography)
  /Author (River L. (Tamaranth))
  /Subject (Cisco Device Configuration Commands (NET-126) Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{6E8DB0}
\definecolor{LightBackground}{HTML}{F5F7FA}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Cisco Device Configuration Commands (NET-126) Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{River L. (Tamaranth)} via \textcolor{DarkBackground}{\uline{cheatography.com/42882/cs/14413/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}River L. (Tamaranth) \\
  \uline{cheatography.com/tamaranth} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 4th February, 2018.\\
   Updated 8th April, 2018.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{x{2.964 cm} x{1.596 cm} x{3.04 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{8.4cm}}{\bf\textcolor{white}{General Configurations}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Command}} & {\bf{Mode}} & {\bf{Function}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\{\{nobreak\}\}{\bf{`terminal history size}} 200` & \{\{nobreak\}\}priv. EXEC & changes how many commands the history buffer stores {\emph{(for this session only)}} \tn 
% Row Count 6 (+ 5)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.116 cm} x{1.368 cm} x{3.116 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{8.4cm}}{\bf\textcolor{white}{Dynamic Routing Protocol Configuration}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Command}} & {\bf{Mode}} & {\bf{Function}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\{\{nobreak\}\}`{\bf{router}} {[}protocol{]}` & \{\{nobreak\}\}global & enables protocol \& enters router config mode \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
`{\bf{auto-summary`}} & router & enables automatic network \# summarization \tn 
% Row Count 8 (+ 3)
% Row 3
\SetRowColor{white}
\{\{nobreak\}\}`{\bf{default-information originate`}} & router & advertises default route info \tn 
% Row Count 11 (+ 3)
% Row 4
\SetRowColor{LightBackground}
\{\{nobreak\}\}`{\bf{network}} {[}ip-address{]}` & router & enables dynamic routing for the network\{\{nl\}\}{\emph{(Directly connected nets only!)}} \tn 
% Row Count 16 (+ 5)
% Row 5
\SetRowColor{white}
\{\{nobreak\}\}`{\bf{network}} {[}ip-address{]} {\bf{area}} 0` & router & assigns network to area 0 \tn 
% Row Count 19 (+ 3)
% Row 6
\SetRowColor{LightBackground}
\{\{nobreak\}\}`{\bf{passive-interface}} g0/1` & router & disables routing updates on that interface \tn 
% Row Count 22 (+ 3)
% Row 7
\SetRowColor{white}
`{\bf{version}} {[}version{]}` & router & sets protocol version \tn 
% Row Count 24 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{DHCP Configuration}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Command}} & {\bf{Mode}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\{\{nobreak\}\}`{\bf{ip dhcp excluded-address}} {[}first IP{]} {[}last ip{]}` & global \tn 
% Row Count 5 (+ 4)
% Row 2
\SetRowColor{LightBackground}
`{\bf{ip dhcp pool}} R1G1` & global \tn 
% Row Count 7 (+ 2)
% Row 3
\SetRowColor{white}
`{\bf{network}} {[}network IP{]} {[}subnet mask{]}` & (dhcp-config) \tn 
% Row Count 9 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`{\bf{default-router}} {[}gateway IP{]}` & \{\{nobreak\}\}(dhcp-config) \tn 
% Row Count 11 (+ 2)
% Row 5
\SetRowColor{white}
`{\bf{dns-server}} {[}dns IP{]}` & (dhcp-config) \tn 
% Row Count 13 (+ 2)
% Row 6
\SetRowColor{LightBackground}
`{\bf{domain-name}} ccna-lab.com` & (dhcp-config) \tn 
% Row Count 15 (+ 2)
% Row 7
\SetRowColor{white}
`{\bf{lease}} 2` & (dhcp-config) \tn 
% Row Count 16 (+ 1)
% Row 8
\SetRowColor{LightBackground}
`{\bf{ip dhcp helper-address}} {[}dhcp server IP{]}` & \{\{nobreak\}\}interface {\emph{(on relay router)}} \tn 
% Row Count 19 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{2.584 cm} x{2.508 cm} x{2.508 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{8.4cm}}{\bf\textcolor{white}{NAT Configuration}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Short Command}} & {\bf{Full Command}} & \{\{nobreak\}\}{\bf{What It Does}} \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
\{\{nobreak\}\}`{\bf{ip nat pool}} {\emph{name}}\{\{nl\}\}{[}first IP{]} {[}last IP{]}\{\{nl\}\}{\bf{net}} {[}subnet mask{]}` & \{\{nobreak\}\}`{\bf{ip nat pool}} {\emph{name}}\{\{nl\}\}{[}first IP{]} {[}last IP{]}\{\{nl\}\}{\bf{netmask}} {[}subnet mask{]}` & defines the pool of public addresses to use \tn 
% Row Count 11 (+ 8)
% Row 2
\SetRowColor{LightBackground}
`{\bf{ip nat in s l}} 10\{\{nl\}\}{\bf{pool}} {\emph{name}} {\bf{ov}}` & \{\{nobreak\}\}`{\bf{ip nat inside source list}}\{\{nl\}\}{[}acl\#{]} {\bf{pool}} {\emph{name}} {\bf{overload}}` & enables PAT \& specifies which ACL is being translated to which NAT pool \tn 
% Row Count 18 (+ 7)
% Row 3
\SetRowColor{white}
`{\bf{ip nat in}}` & `{\bf{ip nat inside`}} & identifies inside interface\{\{nl\}\}(int config) \tn 
% Row Count 22 (+ 4)
% Row 4
\SetRowColor{LightBackground}
`{\bf{ip nat out}}` & {\bf{`ip nat outside`}} & identifies outside interface\{\{nl\}\}(int config) \tn 
% Row Count 26 (+ 4)
% Row 5
\SetRowColor{white}
\{\{nobreak\}\}`{\bf{ip nat in s st}}\{\{nl\}\}192.168.1.10 \seqsplit{209.165.200.18`} & \{\{nobreak\}\}`{\bf{ip nat inside source static}}\{\{nl\}\}{[}private IP{]} {[}global IP{]}` & configures static NAT mapping \tn 
% Row Count 32 (+ 6)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{8.4cm}{x{2.584 cm} x{2.508 cm} x{2.508 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{8.4cm}}{\bf\textcolor{white}{NAT Configuration (cont)}}  \tn
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{3}{x{8.4cm}}{{\bf{{\emph{-{}-{}-{}-- Show Commands -{}-{}-{}--}}}}} \tn 
% Row Count 1 (+ 1)
% Row 7
\SetRowColor{white}
\{\{nobreak\}\}`{\bf{sh ip nat s}}` & `{\bf{show ip nat statistics`}} &  \tn 
% Row Count 4 (+ 3)
% Row 8
\SetRowColor{LightBackground}
\{\{nobreak\}\}`{\bf{sh ip nat t}}` & {\bf{`show ip nat translations`}} &  \tn 
% Row Count 7 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4.64 cm} x{3.36 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Trunking \& Subinterfaces}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Command}} & {\bf{Mode}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{`{\bf{encapsulation dot1Q}}`} \tn 
% Row Count 2 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.116 cm} x{1.368 cm} x{3.116 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{8.4cm}}{\bf\textcolor{white}{Routing Table}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Command}} & {\bf{Mode}} & {\bf{Function}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\{\{nobreak\}\}{\bf{`interface loopback 0`}} & \{\{nobreak\}\}global & \{\{nobreak\}\}loopback address configuration \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\{\{nobreak\}\}{\bf{`ip route}} {[}network{]} {[}subnet{]} {[}exit-int|next-hop{]}\{\{nl\}\}{\bf{ipv6 route}} {[}network/prefix{]} {[}exit-int|next-hop{]}` & global & configs a static route \tn 
% Row Count 13 (+ 8)
% Row 3
\SetRowColor{white}
\{\{nobreak\}\}{\bf{`ip route 0.0.0.0  0.0.0.0}} {[}exit-int{]}\{\{nl\}\}{\bf{ipv6 route ::/0}} {[}exit-int{]}` & global & sets default static route \tn 
% Row Count 19 (+ 6)
% Row 4
\SetRowColor{LightBackground}
{\bf{`ip route 0.0.0.0  0.0.0.0}} {[}next-hop{]} {[}AD{]}\{\{nl\}\}{\bf{ipv6 route ::/0}} {[}next-hop{]} {[}AD{]}` & global & configs a floating static route \tn 
% Row Count 25 (+ 6)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{New Show Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Short Command}} & {\bf{What It Displays}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\{\{nobreak\}\}{\bf{`sh run int g0/0`}} & running config for specified interface \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\{\{nobreak\}\}{\bf{`sh run |}} {[}{\bf{begin}}|{\bf{include}}|{\bf{exclude}}|{\bf{section}}{]} line vty` & filtered running-config output \tn 
% Row Count 8 (+ 5)
% Row 3
\SetRowColor{white}
\{\{nobreak\}\}{\bf{`sh history`}} & contents of history buffer (previously entered commands) \tn 
% Row Count 11 (+ 3)
% Row 4
\SetRowColor{LightBackground}
`{\bf{sh ip protocols}}` & dynamic routing protocol settings \tn 
% Row Count 13 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.116 cm} x{3.116 cm} x{1.368 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{8.4cm}}{\bf\textcolor{white}{Refresher Commands: General}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Short Command}} & {\bf{Complete Command}} & {\bf{Mode}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`{\bf{no ip dom lo}}` & `no ip domain-lookup` & \{\{nobreak\}\}global \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\{\{nobreak\}\}`{\bf{login blo 120 a 3 w 60}}` & \{\{nobreak\}\}`login block-for 120 attempts 3 within 60` & global \tn 
% Row Count 9 (+ 4)
% Row 3
\SetRowColor{white}
\{\{nobreak\}\}`{\bf{security pass min 8}}` & \{\{nobreak\}\}`security password min-length 8` & global \tn 
% Row Count 12 (+ 3)
% Row 4
\SetRowColor{LightBackground}
`{\bf{exec-timeout 10}}` & `exec-timeout 10` & line \tn 
% Row Count 14 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.42 cm} x{3.42 cm} p{0.76 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{8.4cm}}{\bf\textcolor{white}{Refresher Commands: Enabling SSH}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Short Command}} & {\bf{Complete Command}} & {\bf{Mode}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\{\{nobreak\}\}`{\bf{ip dom n}} CCNA-lab.com` & `ip domain-name CCNA-labs.com` & \seqsplit{global} \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\{\{nobreak\}\}`{\bf{cry key gen rsa gen mod 1024}}` & `crypto key generate rsa general-keys\{\{nl\}\}modulus 1024` & \seqsplit{global} \tn 
% Row Count 9 (+ 4)
% Row 3
\SetRowColor{white}
\{\{nobreak\}\}`{\bf{user Bob sec cisco}}` & `username Bob secret cisco` & \seqsplit{global} \tn 
% Row Count 11 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`{\bf{login lo}}` & `login local` & line \tn 
% Row Count 12 (+ 1)
% Row 5
\SetRowColor{white}
`{\bf{trans in ssh}}` & `transport input ssh` & line \tn 
% Row Count 14 (+ 2)
% Row 6
\SetRowColor{LightBackground}
`{\bf{ip ssh v 2}}` & `ip ssh version 2` & \seqsplit{global} \tn 
% Row Count 16 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}