\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{Ben Mason (suidroot)}
\pdfinfo{
  /Title (cadsoft-eagle.pdf)
  /Creator (Cheatography)
  /Author (Ben Mason (suidroot))
  /Subject (CadSoft EAGLE Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{0808A3}
\definecolor{LightBackground}{HTML}{F7F7FC}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{CadSoft EAGLE Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{Ben Mason (suidroot)} via \textcolor{DarkBackground}{\uline{cheatography.com/26294/cs/7945/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}Ben Mason (suidroot) \\
  \uline{cheatography.com/suidroot} \\
        \uline{\seqsplit{about}.com/suidroot}
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 11th May, 2016.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{3}

\begin{tabularx}{5.377cm}{p{0.89586 cm} x{4.08114 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{File Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
EDIT & Load/create library element \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
WRITE & Save Drawing / Library \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
OPEN & Open library \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
CLOSE & Close Library \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
QUIT & Quite EAGLE \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
EXPORT & Generate ASCII list \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
SCRIPT & Run command file \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
USE & Load library \tn 
% Row Count 8 (+ 1)
% Row 8
\SetRowColor{LightBackground}
REMOVE & Delete Files \tn 
% Row Count 9 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{0.84609 cm} x{4.13091 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Schematic Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
NET & Define net \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
BUS & Draw bus line \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{JUNCTION} & Place connection point \tn 
% Row Count 4 (+ 2)
% Row 3
\SetRowColor{white}
\seqsplit{INVOKE} & Add certain 'gate' from a placed device \tn 
% Row Count 6 (+ 2)
% Row 4
\SetRowColor{LightBackground}
LABEL & Provide label to bus or net \tn 
% Row Count 7 (+ 1)
% Row 5
\SetRowColor{white}
\seqsplit{GATESWAP} & Swap equivalent 'gates' \tn 
% Row Count 9 (+ 2)
% Row 6
\SetRowColor{LightBackground}
\seqsplit{PINSWAP} & Swap equivalent pins \tn 
% Row Count 11 (+ 2)
% Row 7
\SetRowColor{white}
ERC & Perform electronic rule check \tn 
% Row Count 12 (+ 1)
% Row 8
\SetRowColor{LightBackground}
BOARD & Create a board from a schematic \tn 
% Row Count 13 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{p{0.79632 cm} x{4.18068 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Create/Edit Drawings or Libraries}}  \tn
% Row 0
\SetRowColor{LightBackground}
ARC & Draw arc \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\seqsplit{CIRCLE} & Draw Circle \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{POLYGON} & Draw Polygon \tn 
% Row Count 4 (+ 2)
% Row 3
\SetRowColor{white}
RECT & Draw rectangle \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
WIRE & Draw line or routed track \tn 
% Row Count 6 (+ 1)
% Row 5
\SetRowColor{white}
TEXT & Add text \tn 
% Row Count 7 (+ 1)
% Row 6
\SetRowColor{LightBackground}
ADD & Add element \tn 
% Row Count 8 (+ 1)
% Row 7
\SetRowColor{white}
COPY & Copy object \tn 
% Row Count 9 (+ 1)
% Row 8
\SetRowColor{LightBackground}
GROUP & Define Group for next action \tn 
% Row Count 10 (+ 1)
% Row 9
\SetRowColor{white}
CUT & Cut Group \tn 
% Row Count 11 (+ 1)
% Row 10
\SetRowColor{LightBackground}
PASTE & Paste Group \tn 
% Row Count 12 (+ 1)
% Row 11
\SetRowColor{white}
\seqsplit{DELETE} & Delete Object \tn 
% Row Count 13 (+ 1)
% Row 12
\SetRowColor{LightBackground}
\seqsplit{MIRROR} & Mirror Object (Move to opposite layer) \tn 
% Row Count 15 (+ 2)
% Row 13
\SetRowColor{white}
MOVE & Move or Rotate Object \tn 
% Row Count 16 (+ 1)
% Row 14
\SetRowColor{LightBackground}
\seqsplit{ROTATE} & Rotate Object \tn 
% Row Count 17 (+ 1)
% Row 15
\SetRowColor{white}
NAME & Name Object \tn 
% Row Count 18 (+ 1)
% Row 16
\SetRowColor{LightBackground}
VALUE & Enter/Change component value \tn 
% Row Count 19 (+ 1)
% Row 17
\SetRowColor{white}
SMASH & Prepare NAME/VALUE text for moving \tn 
% Row Count 21 (+ 2)
% Row 18
\SetRowColor{LightBackground}
SPLIT & Bend wire/line \tn 
% Row Count 22 (+ 1)
% Row 19
\SetRowColor{white}
LAYER & Create/Change Layer \tn 
% Row Count 23 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.19448 cm} x{3.78252 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Display commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
WINDOW & Choose screen window \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
DISPLAY & Display/hide layers \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
ASSIGN & Assign keys \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
CHANGE & Change parameters \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
GRID & Define grid/unit \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
MENU & Configure command menu \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
SET & Set program parameters \tn 
% Row Count 7 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{0.84609 cm} x{4.13091 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Library Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
\seqsplit{RENAME} & Rename symbol/package/device \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\seqsplit{CONNECT} & Define pin/pad assignment \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{PACKAGE} & Define package for device \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
\seqsplit{PREFIX} & Define default prefix for device \tn 
% Row Count 6 (+ 1)
% Row 4
\SetRowColor{LightBackground}
VALUE & Define if value text can be changed \tn 
% Row Count 8 (+ 2)
% Row 5
\SetRowColor{white}
PAD & Add pad to a package \tn 
% Row Count 9 (+ 1)
% Row 6
\SetRowColor{LightBackground}
SMD & Add a smd pad to a package \tn 
% Row Count 10 (+ 1)
% Row 7
\SetRowColor{white}
PIN & Add pin to a symbol \tn 
% Row Count 11 (+ 1)
% Row 8
\SetRowColor{LightBackground}
HOLE & Define non-connecting hole \tn 
% Row Count 12 (+ 1)
% Row 9
\SetRowColor{white}
\seqsplit{REMOVE} & Delete library elements \tn 
% Row Count 13 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.09494 cm} x{3.88206 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Misc Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
AUTO & Start Autorouter \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
HELP & Show Help Page \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
INFO & Show information about object \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
MARK & Set/Remove measuring mark \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\seqsplit{OPTOMIZE} & Join wire segments \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
RUN & Run ULP script \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
SHOW & Highlight object \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
UNDO & Undo Command \tn 
% Row Count 8 (+ 1)
% Row 8
\SetRowColor{LightBackground}
REDO & Redo Command \tn 
% Row Count 9 (+ 1)
% Row 9
\SetRowColor{white}
PRINT & Print to Printer \tn 
% Row Count 10 (+ 1)
% Row 10
\SetRowColor{LightBackground}
UPDATE & Update Library object \tn 
% Row Count 11 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}