\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{Some1}
\pdfinfo{
  /Title (backup.pdf)
  /Creator (Cheatography)
  /Author (Some1)
  /Subject (Backup Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{2256A3}
\definecolor{LightBackground}{HTML}{F1F4F9}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Backup Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{Some1} via \textcolor{DarkBackground}{\uline{cheatography.com/37483/cs/11772/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}Some1 \\
  \uline{cheatography.com/some1} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 12th May, 2017.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{RAID 1}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{Bruger mindst 2 diske \newline % Row Count 1 (+ 1)
Diskene er spejlet og indeholder det samme \newline % Row Count 2 (+ 1)
RAID 1 er ikke fejltolerant \newline % Row Count 3 (+ 1)
Slettes en fil ét sted sker det også på den anden med det samme. \newline % Row Count 5 (+ 2)
Kaldet et mirrored volume set% Row Count 6 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.76 cm} x{4.24 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Raidtyper}}  \tn
% Row 0
\SetRowColor{LightBackground}
Raid 0 full Volume, max performance & Raid1Halv kapacitet, fejltolerant, normal performance \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
Raid 5 Antal diske -1 fejl tolerant & Raid 1 + 0, RAID 0 +1 kan have 2 RAIDS af 1 og samles som RAID 0 og omvendt \tn 
% Row Count 7 (+ 4)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{RAID 10}}  \tn
% Row 0
\SetRowColor{LightBackground}
RAID 1+0 & RAID 0+1 \tn 
% Row Count 1 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{Forskellen er ens. \newline 2 Raids kører enten 1 eller 0 som kører i modsat. \newline 2xRaid1 som kører Raid0 \newline eller \newline 2xRaid0 som kører Raid1}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Diskpart}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{Kan samme som disk management, bare mere \newline % Row Count 1 (+ 1)
terminal og kommandobaseret modul. \newline % Row Count 2 (+ 1)
list disk / partition / volume \newline % Row Count 3 (+ 1)
◦ uniquied / detail / filesystem \newline % Row Count 4 (+ 1)
◦ convert / convert dynmaic \newline % Row Count 5 (+ 1)
◦ create / delete \newline % Row Count 6 (+ 1)
◦ shrink / extend \newline % Row Count 7 (+ 1)
◦ active / assign / format% Row Count 8 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{Active - Basic Disk sættes som aktiv, kun partitioner kan sættes active. \newline Assign - Tilføjer eller ændre drevets sti f.eks. :F til :D \newline Convert - Konverter mellem dynamisk og basic diske}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Disk Management}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{Sæt software raids op \newline % Row Count 1 (+ 1)
Lav flere volumes, diskpartitioner \newline % Row Count 2 (+ 1)
Intialize diske her \newline % Row Count 3 (+ 1)
Tilføj filsystemer her bl.a. GPT og MBR, NTFS og FAT (ReFS)% Row Count 5 (+ 2)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{RAID 0}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{2 disker minimum som arbejder sammen som 1. \newline % Row Count 1 (+ 1)
Full perfomance \newline % Row Count 2 (+ 1)
Full volume \newline % Row Count 3 (+ 1)
Diske skal være lige store ellers bruges laveste volume som fællesnævner \newline % Row Count 5 (+ 2)
Er ikke fejltolerant \newline % Row Count 6 (+ 1)
Kaldet et striped volume set% Row Count 7 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Disk Management}}  \tn
% Row 0
\SetRowColor{LightBackground}
Striped RAID 0 deler filer over på flere diske & Spanned Disk med Volume på en anden Disk \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
Mirrored Fejltolerance, bruger meget plads & Simple Volume Simple Disk med en volume \tn 
% Row Count 6 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Filsystemer}}  \tn
% Row 0
\SetRowColor{LightBackground}
FAT32 begrænset format, bruger små clusters 1.8TB volume & FAT meget forældret og bruges ikke mere, håndtere kun filer på op til 2GB \tn 
% Row Count 4 (+ 4)
% Row 1
\SetRowColor{white}
NTFS , bedre sikkerhed, større filhåndtering, filstørrelse samme som volumen & ReFS nyere end NTFS op til 1 yobibyte \tn 
% Row Count 8 (+ 4)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{*NTFS er det mest udbredte filsystem at anvende i dag}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Disk Management Status}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{Et overvågningsværktøj indbygget i Disk Management. \newline % Row Count 2 (+ 2)
Diskene overvåges mht. status, helbred og performance% Row Count 4 (+ 2)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{p{4 cm} p{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Disktyper}}  \tn
% Row 0
\SetRowColor{LightBackground}
MBR & GPT \tn 
% Row Count 1 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{MBR er en legacy og bagudkompatibel format, GPT er langt overlegen som at MBR kun kan have 4 primære diske og snyde sig frem til en femte vha. extended disk.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{RAID 5}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{Bruger mindst 3 diske \newline % Row Count 1 (+ 1)
Hver disk har en paritet af en anden for at kunne genskabe RAID. \newline % Row Count 3 (+ 2)
RAID 5 er fejltolerant og kan genskabe sig selv hvis én disk går ned, men ikke flere.% Row Count 5 (+ 2)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}