\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{Slobodan Lohja (slohja)}
\pdfinfo{
  /Title (hl7-message-triggers-adt.pdf)
  /Creator (Cheatography)
  /Author (Slobodan Lohja (slohja))
  /Subject (HL7 Message Triggers ADT Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{A3A3A3}
\definecolor{LightBackground}{HTML}{F3F3F3}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{HL7 Message Triggers ADT Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{Slobodan Lohja (slohja)} via \textcolor{DarkBackground}{\uline{cheatography.com/76200/cs/18835/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}Slobodan Lohja (slohja) \\
  \uline{cheatography.com/slohja} \\
        \uline{\seqsplit{www}.linkedin.com/in/slobodanlohja/}
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 26th February, 2019.\\
   Updated 26th February, 2019.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{3}

\begin{tabularx}{5.377cm}{p{0.79632 cm} x{4.18068 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{ADT 1 - 19}}  \tn
% Row 0
\SetRowColor{LightBackground}
\seqsplit{ADT-A01} & Admit/Visit notification \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\seqsplit{ADT-A02} & Transfer a paitent \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{ADT-A03} & Discharge/end visit \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
\seqsplit{ADT-A04} & Register a patient \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\seqsplit{ADT-A05} & Pre-admit a patient \tn 
% Row Count 10 (+ 2)
% Row 5
\SetRowColor{white}
\seqsplit{ADT-A06} & Change an outpatient to an inpatient \tn 
% Row Count 12 (+ 2)
% Row 6
\SetRowColor{LightBackground}
\seqsplit{ADT-A07} & Chage an inpatient to an outpatient \tn 
% Row Count 14 (+ 2)
% Row 7
\SetRowColor{white}
\seqsplit{ADT-A08} & Update Patient Information \tn 
% Row Count 16 (+ 2)
% Row 8
\SetRowColor{LightBackground}
\seqsplit{ADT-A09} & Patient departing- tracking \tn 
% Row Count 18 (+ 2)
% Row 9
\SetRowColor{white}
\seqsplit{ADT-A10} & Patient arriving - tracking \tn 
% Row Count 20 (+ 2)
% Row 10
\SetRowColor{LightBackground}
\seqsplit{ADT-A11} & Cancel admit/visit notification \tn 
% Row Count 22 (+ 2)
% Row 11
\SetRowColor{white}
\seqsplit{ADT-A12} & Cancel Transfer \tn 
% Row Count 24 (+ 2)
% Row 12
\SetRowColor{LightBackground}
\seqsplit{ADT-A13} & Cancel discharge/end visit \tn 
% Row Count 26 (+ 2)
% Row 13
\SetRowColor{white}
\seqsplit{ADT-A14} & Pending Admit \tn 
% Row Count 28 (+ 2)
% Row 14
\SetRowColor{LightBackground}
\seqsplit{ADT-A15} & Pending Transfer \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{5.377cm}{p{0.79632 cm} x{4.18068 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{ADT 1 - 19 (cont)}}  \tn
% Row 15
\SetRowColor{LightBackground}
\seqsplit{ADT-A16} & Pending Discharge \tn 
% Row Count 2 (+ 2)
% Row 16
\SetRowColor{white}
\seqsplit{ADT-A17} & Swap Patients \tn 
% Row Count 4 (+ 2)
% Row 17
\SetRowColor{LightBackground}
\seqsplit{ADT-A18} & Merge Patient Information \tn 
% Row Count 6 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{p{0.74655 cm} x{4.23045 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{ADT 20 - 40}}  \tn
% Row 0
\SetRowColor{LightBackground}
\seqsplit{ADT-A20} & Bed Status Update \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\seqsplit{ADT-A21} & Patient goes on a "leave of absence" \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{ADT-A22} & Patient returns from a "leave of absence" \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
\seqsplit{ADT-A23} & Delete a patient record \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\seqsplit{ADT-A24} & Link Patient Information \tn 
% Row Count 10 (+ 2)
% Row 5
\SetRowColor{white}
\seqsplit{ADT-A25} & Cancel Pending Charges \tn 
% Row Count 12 (+ 2)
% Row 6
\SetRowColor{LightBackground}
\seqsplit{ADT-A26} & Cancel Pending Transfer \tn 
% Row Count 14 (+ 2)
% Row 7
\SetRowColor{white}
\seqsplit{ADT-A27} & Cancel Pending Admit \tn 
% Row Count 16 (+ 2)
% Row 8
\SetRowColor{LightBackground}
\seqsplit{ADT-A28} & Add Person Information \tn 
% Row Count 18 (+ 2)
% Row 9
\SetRowColor{white}
\seqsplit{ADT-A29} & Delete Person Information \tn 
% Row Count 20 (+ 2)
% Row 10
\SetRowColor{LightBackground}
\seqsplit{ADT-A30} & Merge person Information \tn 
% Row Count 22 (+ 2)
% Row 11
\SetRowColor{white}
\seqsplit{ADT-A31} & Update Person Information \tn 
% Row Count 24 (+ 2)
% Row 12
\SetRowColor{LightBackground}
\seqsplit{ADT-A32} & Cancel Patient arriving-tracking \tn 
% Row Count 26 (+ 2)
% Row 13
\SetRowColor{white}
\seqsplit{ADT-A33} & Cancel Patient departing-tracking \tn 
% Row Count 28 (+ 2)
% Row 14
\SetRowColor{LightBackground}
\seqsplit{ADT-A34} & Merge patient information - patient id only \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{5.377cm}{p{0.74655 cm} x{4.23045 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{ADT 20 - 40 (cont)}}  \tn
% Row 15
\SetRowColor{LightBackground}
\seqsplit{ADT-A35} & Merge Patient Information - patient account number only \tn 
% Row Count 2 (+ 2)
% Row 16
\SetRowColor{white}
\seqsplit{ADT-A36} & Merge patient Information - patient id and account number \tn 
% Row Count 4 (+ 2)
% Row 17
\SetRowColor{LightBackground}
\seqsplit{ADT-A37} & Unlink patient information \tn 
% Row Count 6 (+ 2)
% Row 18
\SetRowColor{white}
\seqsplit{ADT-A38} & Cancel Pre-admit \tn 
% Row Count 8 (+ 2)
% Row 19
\SetRowColor{LightBackground}
\seqsplit{ADT-A39} & Merge person - patient id \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{p{0.74655 cm} x{4.23045 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{ADT 40 +}}  \tn
% Row 0
\SetRowColor{LightBackground}
\seqsplit{ADT-A40} & merge patient - patient identifier list \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\seqsplit{ADT-A41} & Merge account - patient account number \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{ADT-A42} & Merge visit - visit number \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
\seqsplit{ADT-A43} & Move patient information - patient identifier list \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\seqsplit{ADT-A44} & Move account information - patient account number \tn 
% Row Count 10 (+ 2)
% Row 5
\SetRowColor{white}
\seqsplit{ADT-A45} & Move visit information - visit number \tn 
% Row Count 12 (+ 2)
% Row 6
\SetRowColor{LightBackground}
\seqsplit{ADT-A46} & Change patient id (for backward compatibiltiy only) \tn 
% Row Count 14 (+ 2)
% Row 7
\SetRowColor{white}
\seqsplit{ADT-A47} & Change patient identifier list \tn 
% Row Count 16 (+ 2)
% Row 8
\SetRowColor{LightBackground}
\seqsplit{ADT-A48} & Change alternate patient id \tn 
% Row Count 18 (+ 2)
% Row 9
\SetRowColor{white}
\seqsplit{ADT-A49} & Change patient account number \tn 
% Row Count 20 (+ 2)
% Row 10
\SetRowColor{LightBackground}
\seqsplit{ADT-A50} & Change visit number \tn 
% Row Count 22 (+ 2)
% Row 11
\SetRowColor{white}
\seqsplit{ADT-A51} & Change alternate visit id \tn 
% Row Count 24 (+ 2)
% Row 12
\SetRowColor{LightBackground}
\seqsplit{ADT-A52} & Cancel leave of absence for a patient \tn 
% Row Count 26 (+ 2)
% Row 13
\SetRowColor{white}
\seqsplit{ADT-A53} & Cancel patient returns from a leave of absence \tn 
% Row Count 28 (+ 2)
% Row 14
\SetRowColor{LightBackground}
\seqsplit{ADT-A54} & Change attending doctor \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{5.377cm}{p{0.74655 cm} x{4.23045 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{ADT 40 + (cont)}}  \tn
% Row 15
\SetRowColor{LightBackground}
\seqsplit{ADT-A55} & Cancel change attending doctor \tn 
% Row Count 2 (+ 2)
% Row 16
\SetRowColor{white}
\seqsplit{ADT-A60} & Update Allergy Information \tn 
% Row Count 4 (+ 2)
% Row 17
\SetRowColor{LightBackground}
\seqsplit{ADT-A61} & Change consulting doctor \tn 
% Row Count 6 (+ 2)
% Row 18
\SetRowColor{white}
\seqsplit{ADT-A62} & Cancel change consulting doctor \tn 
% Row Count 8 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}