\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{setevoy2}
\pdfinfo{
  /Title (vim.pdf)
  /Creator (Cheatography)
  /Author (setevoy2)
  /Subject (VIM Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{A3A3A3}
\definecolor{LightBackground}{HTML}{F3F3F3}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{VIM Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{setevoy2} via \textcolor{DarkBackground}{\uline{cheatography.com/32371/cs/9961/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}setevoy2 \\
  \uline{cheatography.com/setevoy2} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 24th November, 2016.\\
   Updated 24th November, 2016.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{3}

\begin{tabularx}{5.377cm}{x{0.84609 cm} x{4.13091 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Editing}}  \tn
% Row 0
\SetRowColor{LightBackground}
a & Append text after the cursor \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
i & Insert text before the cursor \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
o & Begin a new line below the cursor and insert text \tn 
% Row Count 4 (+ 2)
% Row 3
\SetRowColor{white}
O & Begin a new line above the cursor and insert text \tn 
% Row Count 6 (+ 2)
% Row 4
\SetRowColor{LightBackground}
R & Enter Insert mode, replacing characters rather than inserting \tn 
% Row Count 8 (+ 2)
% Row 5
\SetRowColor{white}
r \{char\} & Replace the character under the cursor with \{char\} \tn 
% Row Count 10 (+ 2)
% Row 6
\SetRowColor{LightBackground}
y & Copy line under cursor or selected (v) to register \tn 
% Row Count 12 (+ 2)
% Row 7
\SetRowColor{white}
yy {[}num{]} & Copy line under cursor selected (v) to register \tn 
% Row Count 14 (+ 2)
% Row 8
\SetRowColor{LightBackground}
d & Cur selected (v) to register \tn 
% Row Count 15 (+ 1)
% Row 9
\SetRowColor{white}
p & Put the text from register after the cursor \tn 
% Row Count 17 (+ 2)
% Row 10
\SetRowColor{LightBackground}
P & Put the text from register before the cursor \tn 
% Row Count 19 (+ 2)
% Row 11
\SetRowColor{white}
:pu & Put the text from register after current line \tn 
% Row Count 21 (+ 2)
% Row 12
\SetRowColor{LightBackground}
:pu! & Put the text from register before current line \tn 
% Row Count 23 (+ 2)
% Row 13
\SetRowColor{white}
u & Undo changes \tn 
% Row Count 24 (+ 1)
% Row 14
\SetRowColor{LightBackground}
U & Undo all latest changes on one line \tn 
% Row Count 26 (+ 2)
% Row 15
\SetRowColor{white}
. & Repeat last change \tn 
% Row Count 27 (+ 1)
% Row 16
\SetRowColor{LightBackground}
\seqsplit{Ctrl+r} & Redo changes \tn 
% Row Count 28 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{p{0.74655 cm} x{4.23045 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Insert}}  \tn
% Row 0
\SetRowColor{LightBackground}
:r file & Insert the file content below the cursor \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
:r !cmd & Execute cmd and insert its standard output below the cursor \tn 
% Row Count 4 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.54287 cm} x{3.43413 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Neovim specific}}  \tn
% Row 0
\SetRowColor{LightBackground}
:terminal & Open xterm terminal emulator in current window \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
:vsplit term://top & Open top in new vertical window \tn 
% Row Count 4 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{0.9954 cm} x{3.9816 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Moving around}}  \tn
% Row 0
\SetRowColor{LightBackground}
H & Jump to the top of the screen \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
M & Jump to the middle of the screen \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
G & Jump to end of file \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
J & Jump to the bottom of the screen \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
gg & Jump to beginning of file \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
h & Move to one position right \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
l & Move to one position left \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
k \seqsplit{(Ctrl+p)} & Move to one line up \tn 
% Row Count 9 (+ 2)
% Row 8
\SetRowColor{LightBackground}
j \seqsplit{(Ctrl+j)} & Move to one line down \tn 
% Row Count 11 (+ 2)
% Row 9
\SetRowColor{white}
0 (Home) & To the first character of the line \tn 
% Row Count 13 (+ 2)
% Row 10
\SetRowColor{LightBackground}
\$ (End) & To the end of the line \tn 
% Row Count 14 (+ 1)
% Row 11
\SetRowColor{white}
e & Move to the end of a word \tn 
% Row Count 15 (+ 1)
% Row 12
\SetRowColor{LightBackground}
w & Move to the begin of a next word in line \tn 
% Row Count 17 (+ 2)
% Row 13
\SetRowColor{white}
mx & Set mark x at the current cursor position \tn 
% Row Count 19 (+ 2)
% Row 14
\SetRowColor{LightBackground}
'x & Jump to the beginning of the line of mark x \tn 
% Row Count 21 (+ 2)
% Row 15
\SetRowColor{white}
`x & Jump to the cursor position of mark x \tn 
% Row Count 23 (+ 2)
% Row 16
\SetRowColor{LightBackground}
\% & Jump to corresponding item, e.g. from an open brace to its matching closing brace \tn 
% Row Count 26 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.9908 cm} x{2.9862 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Tabs}}  \tn
% Row 0
\SetRowColor{LightBackground}
vim -p first.txt second.txt & Open first.txt second.txt in tabs \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
:tabedit \{file\} & Edit specified file in a new tab \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
:tabclose & Close current tab \tn 
% Row Count 5 (+ 1)
% Row 3
\SetRowColor{white}
:tabonly & Cclose all other tabs \tn 
% Row Count 6 (+ 1)
% Row 4
\SetRowColor{LightBackground}
:tabs & List all tabs including their displayed windows \tn 
% Row Count 8 (+ 2)
% Row 5
\SetRowColor{white}
:tabm 0 & Move current tab to first \tn 
% Row Count 10 (+ 2)
% Row 6
\SetRowColor{LightBackground}
:tabm & Move current tab to last \tn 
% Row Count 11 (+ 1)
% Row 7
\SetRowColor{white}
:tabm \{i\} & Move current tab to position i+1 \tn 
% Row Count 13 (+ 2)
% Row 8
\SetRowColor{LightBackground}
:tabn (gt) & Go to next tab \tn 
% Row Count 14 (+ 1)
% Row 9
\SetRowColor{white}
:tabp (gT) & Go to previous tab \tn 
% Row Count 15 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.09494 cm} x{3.88206 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Windows}}  \tn
% Row 0
\SetRowColor{LightBackground}
:sp & Split current window in two \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
:sp \{file\} & Split current window in two with \{file\} \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
:5sp \{file\} & Split current window in two with \{file\} 5 lines height \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
:vs & Like |:split|, but split vertically \tn 
% Row Count 7 (+ 2)
% Row 4
\SetRowColor{LightBackground}
:vs \{file\} & Split current window vertically in two with \{file\} \tn 
% Row Count 9 (+ 2)
% Row 5
\SetRowColor{white}
:5vs \{file\} & Split current window vertically in two with \{file\} 5 lines weight \tn 
% Row Count 12 (+ 3)
% Row 6
\SetRowColor{LightBackground}
:new & Create a new window and start editing an empty file in it \tn 
% Row Count 14 (+ 2)
% Row 7
\SetRowColor{white}
:vne & Like |:new|, but split vertically \tn 
% Row Count 16 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.04517 cm} x{3.93183 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Windows moving}}  \tn
% Row 0
\SetRowColor{LightBackground}
Ctrl+w h & Move to the window on the left \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
Ctrl+w l & Move to the window on the right \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
Ctrl+w j & Move to the window below \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
Ctrl+w k & Move to the window above \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
Ctrl+w t & Move to the TOP window \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
Ctrl+w b & Move to the BOTTOM window \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
Ctrl+w K & Move window under cursor to top \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
Ctrl+w H & Move window to the far left \tn 
% Row Count 8 (+ 1)
% Row 8
\SetRowColor{LightBackground}
Ctrl+w J & Move window to the bottom \tn 
% Row Count 9 (+ 1)
% Row 9
\SetRowColor{white}
Ctrl+w L & Move window to the far right \tn 
% Row Count 10 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}