\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{M. Yasin Çavdar (myasincavdar)}
\pdfinfo{
  /Title (a10-acos-system-configuration-and-administration.pdf)
  /Creator (Cheatography)
  /Author (M. Yasin Çavdar (myasincavdar))
  /Subject (A10 - ACOS System Configuration \& Administration Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{005DA6}
\definecolor{LightBackground}{HTML}{EFF4F9}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{A10 - ACOS System Configuration \& Administration Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{M. Yasin Çavdar (myasincavdar)} via \textcolor{DarkBackground}{\uline{cheatography.com/174311/cs/36608/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}M. Yasin Çavdar (myasincavdar) \\
  \uline{cheatography.com/myasincavdar} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 30th January, 2023.\\
   Updated 31st January, 2023.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.


\begin{tabularx}{17.67cm}{x{4.6629 cm} x{12.6071 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
`enable` & To access the Privileged EXEC level of the CLI and allow access to all configuration levels. \tn 
% Row Count 4 (+ 4)
% Row 1
\SetRowColor{white}
`config` & To access the global configuration level. \tn 
% Row Count 6 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`clear console` & Terminate the current login process and start a new one. \tn 
% Row Count 8 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.4623 cm} x{8.8077 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Time \& Date Parameters}}  \tn
% Row 0
\SetRowColor{LightBackground}
`\#show clock` & Shows the time. \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
`\#clock set 19:15:33 December 17 2023` & The following example sets the time to 7:15 PM and 33 seconds on December 17, 2015 (for times beyond 12:00 PM, use 24-hour notation). \tn 
% Row Count 8 (+ 7)
% Row 2
\SetRowColor{LightBackground}
`\#timezone Europe/Istanbul` & The following example sets the timezone to Europe/Istanbul. \tn 
% Row Count 11 (+ 3)
% Row 3
\SetRowColor{white}
`\#ntp server 216.171.124.36` & To configure a preferred NTP server. \tn 
% Row Count 13 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`\#prefer` & Then use the prefer command to make this the preferred server:. \tn 
% Row Count 17 (+ 4)
% Row 5
\SetRowColor{white}
`\#ntp auth-key 13579 M ascii XxEnc192` & Create authentication keys (13579). \tn 
% Row Count 19 (+ 2)
% Row 6
\SetRowColor{LightBackground}
`\#ntp trusted-key 13579` & Add key (13579) to the list of trusted keys. \tn 
% Row Count 22 (+ 3)
% Row 7
\SetRowColor{white}
`\#ntp server 207.69.131.204` & Configure the NTP server at 207.69.131.204 to use trusted key (13579). \tn 
% Row Count 26 (+ 4)
% Row 8
\SetRowColor{LightBackground}
`\#show running-config | include ntp` & Verify the NTP server and authentication key configuration. \tn 
% Row Count 29 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Basic System Parameters}}  \tn
% Row 0
\SetRowColor{LightBackground}
`\#hostname ACOS-TPS2` & Change the hostname. \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`\#ip dns suffix a10networks.com` & To set the default domain name (DNS suffix) for host names on the ACOS device. \tn 
% Row Count 6 (+ 4)
% Row 2
\SetRowColor{LightBackground}
`\#ip dns primary 10.10.128.101` & To set the primary DNS server for resolving DNS requests. \tn 
% Row Count 9 (+ 3)
% Row 3
\SetRowColor{white}
`\#ip dns secondary 10.10.128.102` & To set the secondary DNS server for resolving DNS requests. \tn 
% Row Count 12 (+ 3)
% Row 4
\SetRowColor{LightBackground}
`\#show running-config | include dns` & Show running-config command to view your configuration. \tn 
% Row Count 15 (+ 3)
% Row 5
\SetRowColor{white}
`\#banner login "welcome to login mode"` & To set the login banner. \tn 
% Row Count 18 (+ 3)
% Row 6
\SetRowColor{LightBackground}
`\#banner login "welcome to exec mode"` & To set the exec banner. \tn 
% Row Count 21 (+ 3)
% Row 7
\SetRowColor{white}
\mymulticolumn{2}{x{17.67cm}}{`\#web-service secure wipe`} \tn 
% Row Count 22 (+ 1)
% Row 8
\SetRowColor{LightBackground}
`\#import cert` & To import a CA-signed certificate. \tn 
% Row Count 24 (+ 2)
% Row 9
\SetRowColor{white}
`\#interface management` & Puts you in interface management mode, where you can continue the management interface configuration. \tn 
% Row Count 30 (+ 6)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Basic System Parameters (cont)}}  \tn
% Row 10
\SetRowColor{LightBackground}
`\#ip address 192.168.10.2 /24` & To configure IPv4 access. \tn 
% Row Count 2 (+ 2)
% Row 11
\SetRowColor{white}
`\#ip default-gateway 192.168.2.1` & To configure IPv4 access. \tn 
% Row Count 4 (+ 2)
% Row 12
\SetRowColor{LightBackground}
`\#ipv6 address 2001:db8::2/32` & To configure IPv6 access. \tn 
% Row Count 6 (+ 2)
% Row 13
\SetRowColor{white}
`\#ipv6 default-gateway 2001:db8::1` & To configure IPv6 access. \tn 
% Row Count 8 (+ 2)
% Row 14
\SetRowColor{LightBackground}
`\#show interfaces management` & To verify the configuration. \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Parameters}}  \tn
% Row 0
\SetRowColor{LightBackground}
`\#security-reset` & Destroys all sensitive information. \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`\#snmp-server SNMPv3` & SNMPv3 Configuration \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`\#system fips enable` & Enabling FIPS. \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
`\#system fips disable` & Disabling FIPS. \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`\#system default-mtu` & To configure the MTU for supported physical and logical ports at the global configuration level. \tn 
% Row Count 13 (+ 5)
% Row 5
\SetRowColor{white}
\seqsplit{`\#system-jumbo-global} enable-jumbo` & To enable jumbo frame support on FTA models. \tn 
% Row Count 16 (+ 3)
% Row 6
\SetRowColor{LightBackground}
\seqsplit{`\#system-jumbo-global} enable-jumbo` \{\{nl\}\}	 `\#write memory` \{\{nl\}\} `\#reboot` & To enable jumbo frame support on a non-FTA model. \tn 
% Row Count 20 (+ 4)
% Row 7
\SetRowColor{white}
`\#no system-jumbo-global enable-jumbo` & To disable jumbo frame support on FTA models. \tn 
% Row Count 23 (+ 3)
% Row 8
\SetRowColor{LightBackground}
`\#no system-jumbo-global enable-jumbo` \{\{nl\}\} `\#write memory` \{\{nl\}\} `\#reboot` & To disable jumbo frame support on a non-FTA model. \tn 
% Row Count 27 (+ 4)
% Row 9
\SetRowColor{white}
`\#system default-mtu {\bf{9216}}` & To configure the MTU for all interface ports at the global configuration level. \tn 
% Row Count 31 (+ 4)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Parameters (cont)}}  \tn
% Row 10
\SetRowColor{LightBackground}
`\#interface ethernet 1` \{\{nl\}\} `mtu 1800` & To change the MTU on a particular interface, use the mtu command at the configuration level for the interface. \tn 
% Row Count 6 (+ 6)
% Row 11
\SetRowColor{white}
`\#show interface ve 300` & To view VE interface information. \tn 
% Row Count 8 (+ 2)
% Row 12
\SetRowColor{LightBackground}
`\#show interface ethernet 15` & To view Ethernet interface information. \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.4623 cm} x{8.8077 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{SSL}}  \tn
% Row 0
\SetRowColor{LightBackground}
`\#import key` & To import a key. (RSA \& ECDSA) \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`\#import cert` & To import a CA-signed certificate. (RSA \& ECDSA) \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
`\#web-service secure private-key load` & (RSA \& ECDSA) \tn 
% Row Count 7 (+ 2)
% Row 3
\SetRowColor{white}
`\#web-service secure certificate load` & (RSA \& ECDSA) \tn 
% Row Count 9 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`\#import glm-cert` & (RSA) \tn 
% Row Count 10 (+ 1)
% Row 5
\SetRowColor{white}
`\#sshd key load` & (RSA) \tn 
% Row Count 11 (+ 1)
% Row 6
\SetRowColor{LightBackground}
`\#ssh-pubkey import` & (RSA) \tn 
% Row Count 13 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Backup}}  \tn
% Row 0
\SetRowColor{LightBackground}
`\#backup system \seqsplit{scp://exampleuser@192}.168.3.3/home/users/exampleuser/backups/backupfile.tar.gz` & To creates a backup of the system (startup-config file, aFleX scripts, and SSL certificates and keys) on a remote server using SCP. \tn 
% Row Count 7 (+ 7)
% Row 1
\SetRowColor{white}
`\#backup log period 1 use-mgmt-port \seqsplit{scp://exampleuser@192}.168.3.3/home/users/exampleuser/backups/backuplog.tar.gz` & To creates a daily backup of the log entries in the syslog buffer. The connection to the remote server will be established using SCP on the management interface (use-mgmt-port). \tn 
% Row Count 16 (+ 9)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Configuration Management}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Using\_the\_CLI\_to\_Save\_Configurations.htm\#tps-sag-config-backup\_2645765031\_1451538\%3FTocPath\%3DBacking\%2520Up\%2520System\%2520Information\%7CSave\%2520Multiple\%2520Configuration\%2520Files\%2520Locally\%7C\_\_\_\_\_2"\}\}{\bf{Save Configurations}}\{\{/link\}\}} \tn 
% Row Count 8 (+ 8)
% Row 1
\SetRowColor{white}
`\#write memory` & Replaces the configuration profile in the image area with the running-config. \tn 
% Row Count 12 (+ 4)
% Row 2
\SetRowColor{LightBackground}
`\#write force` & Forces the ACOS device to save the configuration regardless of whether the system is ready. \tn 
% Row Count 17 (+ 5)
% Row 3
\SetRowColor{white}
`\#write memory primary` & Replaces the configuration profile stored in the primary image area with the running-config \tn 
% Row Count 22 (+ 5)
% Row 4
\SetRowColor{LightBackground}
`\#write memory secondary` & Replaces the configuration profile stored in the secondary image area with the running-config. \tn 
% Row Count 27 (+ 5)
% Row 5
\SetRowColor{white}
`\#write memory profile-name` & The ACOS device replaces the commands in the specified profile-name with the running-config. \tn 
% Row Count 32 (+ 5)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Configuration Management (cont)}}  \tn
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Using\_the\_CLI\_to\_View\_Configurations.htm\#tps-sag-config-backup\_2645765031\_1451546\%3FTocPath\%3DBacking\%2520Up\%2520System\%2520Information\%7CSave\%2520Multiple\%2520Configuration\%2520Files\%2520Locally\%7C\_\_\_\_\_3"\}\}{\bf{View Configurations}}\{\{/link\}\}} \tn 
% Row Count 8 (+ 8)
% Row 7
\SetRowColor{white}
`\#show startup-config` & To view locally stored configuration information. \tn 
% Row Count 11 (+ 3)
% Row 8
\SetRowColor{LightBackground}
`\#show startup-config all` & To display a list of the locally stored configuration profiles. \tn 
% Row Count 15 (+ 4)
% Row 9
\SetRowColor{white}
`\#show startup-config profile profile-name` & Displays the commands that are in the specified configuration profile. \tn 
% Row Count 19 (+ 4)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Using\_the\_CLI\_to\_Copy\_Configurations.htm\#tps-sag-config-backup\_2645765031\_1451552\%3FTocPath\%3DBacking\%2520Up\%2520System\%2520Information\%7CSave\%2520Multiple\%2520Configuration\%2520Files\%2520Locally\%7C\_\_\_\_\_4"\}\}{\bf{Copy Configurations}}\{\{/link\}\}} \tn 
% Row Count 27 (+ 8)
% Row 11
\SetRowColor{white}
`\#copy` & To copy configurations. \tn 
% Row Count 29 (+ 2)
% Row 12
\SetRowColor{LightBackground}
`\#copy startup-config profile-name` & Copies the configuration profile that is currently linked to "startup-config" and saves the copy under the specified profile-name. \tn 
% Row Count 36 (+ 7)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Configuration Management (cont)}}  \tn
% Row 13
\SetRowColor{LightBackground}
`\#copy startup-config running-config` & Copies the configuration profile that is currently linked to "startup-config" and replaces the current running-config. \tn 
% Row Count 7 (+ 7)
% Row 14
\SetRowColor{white}
`\#copy running-config startup-config` & Copies the running-config and saves it to the configuration profile currently linked to the startup-config. \tn 
% Row Count 13 (+ 6)
% Row 15
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Using\_the\_CLI\_to\_Compare\_Configurations.htm\#tps-sag-config-backup\_2645765031\_1451564\%3FTocPath\%3DBacking\%2520Up\%2520System\%2520Information\%7CSave\%2520Multiple\%2520Configuration\%2520Files\%2520Locally\%7C\_\_\_\_\_5"\}\}{\bf{Compare Configurations}}\{\{/link\}\}} \tn 
% Row Count 21 (+ 8)
% Row 16
\SetRowColor{white}
`\#diff startup-config running-config` & Compares the configuration profile that is currently linked to "startup-config" with the running-config. \tn 
% Row Count 27 (+ 6)
% Row 17
\SetRowColor{LightBackground}
`\#diff startup-config profile-name` & Compares the configuration profile that is currently linked to "startup-config" with the specified configuration profile-name. \tn 
% Row Count 34 (+ 7)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Configuration Management (cont)}}  \tn
% Row 18
\SetRowColor{LightBackground}
`\#diff profile-name1 profile-name2` & To compare any two configuration profiles. \tn 
% Row Count 3 (+ 3)
% Row 19
\SetRowColor{white}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Using\_the\_CLI\_to\_Link\_Configuration\_Profiles.htm\#tps-sag-config-backup\_2645765031\_1451595\%3FTocPath\%3DBacking\%2520Up\%2520System\%2520Information\%7CSave\%2520Multiple\%2520Configuration\%2520Files\%2520Locally\%7C\_\_\_\_\_6"\}\}{\bf{Link Configuration Profiles}}\{\{/link\}\}} \tn 
% Row Count 11 (+ 8)
% Row 20
\SetRowColor{LightBackground}
`\#link` & To link configuration profiles. \tn 
% Row Count 13 (+ 2)
% Row 21
\SetRowColor{white}
`\#link startup-config test-profile primary` & To links the startup-config to a new profile called test\_profile. \tn 
% Row Count 17 (+ 4)
% Row 22
\SetRowColor{LightBackground}
`\#link startup-config default` & To relink "startup-config" to the configuration profile stored in the image area. \tn 
% Row Count 22 (+ 5)
% Row 23
\SetRowColor{white}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Using\_the\_CLI\_to\_Delete\_a\_Profile.htm\#tps-sag-config-backup\_2645765031\_1451606\%3FTocPath\%3DBacking\%2520Up\%2520System\%2520Information\%7CSave\%2520Multiple\%2520Configuration\%2520Files\%2520Locally\%7C\_\_\_\_\_7"\}\}{\bf{Delete a Profile}}\{\{/link\}\}} \tn 
% Row Count 29 (+ 7)
% Row 24
\SetRowColor{LightBackground}
`\#delete` & To delete configurations. \tn 
% Row Count 31 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Configuration Management (cont)}}  \tn
% Row 25
\SetRowColor{LightBackground}
`\#delete startup-config test\_profile1` & To remove a specific configuration profile. \tn 
% Row Count 3 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Source Interface for Management Traffic}}  \tn
% Row 0
\SetRowColor{LightBackground}
`\#show ip route mgmt` & To display the routes in the management route table. \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
`\#show ip route` & To display the data plane routes. \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`\#show ip fib` & To display the data plane routes. \tn 
% Row Count 7 (+ 2)
% Row 3
\SetRowColor{white}
`\#show techsupport` & To display general information about the router when reporting a problem. \tn 
% Row Count 11 (+ 4)
% Row 4
\SetRowColor{LightBackground}
`\#ip \seqsplit{control-apps-use-mgmt-port`} & To management interface as the source interface for automated management traffic is enable. (Execute in `interface management`) \tn 
% Row Count 18 (+ 7)
% Row 5
\SetRowColor{white}
`\#interface loopback 2` \{\{nl\}\} `\#ip address 10.10.10.66 /24` \{\{nl\}\} `\#exit` & To configure an IP address on loopback interface 2. \tn 
% Row Count 22 (+ 4)
% Row 6
\SetRowColor{LightBackground}
`\#ip mgmt-traffic all source-interface loopback 2` & To configures the ACOS device to use loopback interface 2 as the source interface for management traffic of all types listed above. \tn 
% Row Count 29 (+ 7)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{5.5264 cm} x{11.7436 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Boot Options}}  \tn
% Row 0
\SetRowColor{LightBackground}
`\#show version` & To shows storage area information. \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`\#show bootimage` & To view the storage location for future reboots. \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{`\#bootimage} hd sec` & To configure the ACOS device to use the secondary storage area on the SSD or hard drive for future reboots, and verify the setting. \tn 
% Row Count 9 (+ 5)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Fail-Safe Automatic Recovery}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Use\_the\_CLI\_to\_Configure\_FPGA\_and\_Software\_Fail\_Safe.htm\#tps-sag-config-failsafe\_2216413564\_1448997\%3FTocPath\%3DFail-Safe\%2520Automatic\%2520Recovery\%7CConfigure\%2520Fail-Safe\%2520Automatic\%2520Recovery\%7C\_\_\_\_\_1"\}\}{\bf{FPGA and Software Fail-Safe}}\{\{/link\}\}} \tn 
% Row Count 8 (+ 8)
% Row 1
\SetRowColor{white}
`\#fail-safe \seqsplit{fpga-buff-recovery-threshold} 2` & Trigger the fail-safe recovery if the number of free (available) FPGA buffers drops below 2 long enough for the recovery timeout to occur. \tn 
% Row Count 15 (+ 7)
% Row 2
\SetRowColor{LightBackground}
`\#fail-safe \seqsplit{sw-error-recovery-timeout} 3` & Trigger the fail-safe recovery if a software error remains in effect for longer than 3 minutes. \tn 
% Row Count 20 (+ 5)
% Row 3
\SetRowColor{white}
`\#show fail-safe config` & Verify the configuration. \tn 
% Row Count 22 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`\#show fail-safe information` & To output differs between models that use FPGAs in hardware and models that do not. \tn 
% Row Count 27 (+ 5)
% Row 5
\SetRowColor{white}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Use\_the\_CLI\_to\_configure\_L2\_3\_ASIC\_Fail\_Safe.htm\#tps-sag-config-failsafe\_2216413564\_1449051\%3FTocPath\%3DFail-Safe\%2520Automatic\%2520Recovery\%7CConfigure\%2520Fail-Safe\%2520Automatic\%2520Recovery\%7C\_\_\_\_\_2"\}\}{\bf{L2/3 ASIC Fail-Safe}}\{\{/link\}\}} \tn 
% Row Count 35 (+ 8)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Fail-Safe Automatic Recovery (cont)}}  \tn
% Row 6
\SetRowColor{LightBackground}
`\#system asic-mmu-fail-safe recovery-threshold 5` & To configures the error threshold count to 5 (the default value is 2). \tn 
% Row Count 4 (+ 4)
% Row 7
\SetRowColor{white}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Use\_the\_CLI\_to\_Configure\_Fail\_safe\_for\_Total\_Memory\_Decrease.htm\#tps-sag-config-failsafe\_2216413564\_1449165\%3FTocPath\%3DFail-Safe\%2520Automatic\%2520Recovery\%7CConfigure\%2520Fail-Safe\%2520Automatic\%2520Recovery\%7C\_\_\_\_\_3"\}\}{\bf{Fail-safe for Total Memory Decrease}}\{\{/link\}\}} \tn 
% Row Count 12 (+ 8)
% Row 8
\SetRowColor{LightBackground}
`\#fail-safe \seqsplit{total-memory-size-check} 5 log` & The fail-safe feature will be triggered when the total memory size is less than 5 GB. When this happens, this event will be logged. \tn 
% Row Count 19 (+ 7)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{3.9721 cm} x{13.2979 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Power On Auto Provisioning}}  \tn
% Row 0
\SetRowColor{LightBackground}
`\#show poap` & To show the status (enabled or disabled) of POAP mode. \tn 
% Row Count 2 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Monitoring Tools}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/tps-sag-monitor-syslog.htm\#tps-sag-monitor-syslog\_4011124534\_1448969\%3FTocPath\%3DSystem\%2520Log\%2520Messages\%7C\_\_\_\_\_0"\}\}{\bf{System Log Messages}}\{\{/link\}\}} \tn 
% Row Count 6 (+ 6)
% Row 1
\SetRowColor{white}
\textasciicircum{}glid 1 \{\{nl\}\}~~pkt-rate-limit 4 \{\{nl\}\}~~over-limit-action drop \{\{nl\}\}! \{\{nl\}\}ddos src entry src-v41 10.10.71.7 \{\{nl\}\}~~log-enable \{\{nl\}\}~~log-periodic \{\{nl\}\}~~l4-type tcp \{\{nl\}\}~~~~glid 1 \{\{nl\}\}! \{\{nl\}\}system ddos-attack log \{\{nl\}\}!\textasciicircum{} & To configure a custom packet rate limit for TCP traffic from a source, and enable logging of DDoS events for the source. \tn 
% Row Count 22 (+ 16)
% Row 2
\SetRowColor{LightBackground}
\textasciicircum{}ddos template logging default \{\{nl\}\}~~log-format-cef \{\{nl\}\}~~use-obj-name \{\{nl\}\}!\textasciicircum{} & Enable CEF and object name display for DDoS event messages. \tn 
% Row Count 28 (+ 6)
% Row 3
\SetRowColor{white}
\textasciicircum{}ddos dst entry dst-host8 10.10.10.8 \{\{nl\}\}~~log-enable \{\{nl\}\}~~log-periodic \{\{nl\}\}! vsystem ddos-attack log \{\{nl\}\}!\textasciicircum{} & For the template to be used, DDoS event logging also must be enabled globally and in the individual rules that will use logging. \tn 
% Row Count 35 (+ 7)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Monitoring Tools (cont)}}  \tn
% Row 4
\SetRowColor{LightBackground}
`\#logging single-priority error` & To configure \{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Single\_Priority\_Logging.htm\#tps-sag-monitor-syslog\_4011124534\_1449152\%3FTocPath\%3DSystem\%2520Log\%2520Messages\%7C\_\_\_\_\_4"\}\}single-priority logging\{\{/link\}\} \tn 
% Row Count 15 (+ 15)
% Row 5
\SetRowColor{white}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/tps-sag-monitor-email-log.htm\#tps-sag-monitor-email-log\_1541057892\_1448970\%3FTocPath\%3DEmailing\%2520Log\%2520Messages\%7C\_\_\_\_\_0"\}\}{\bf{Emailing Log Messages}}\{\{/link\}\}} \tn 
% Row Count 21 (+ 6)
% Row 6
\SetRowColor{LightBackground}
`\#logging email buffer` & To configure log email settings. \tn 
% Row Count 23 (+ 2)
% Row 7
\SetRowColor{white}
`\#logging email buffer number 32 time 30` & To configures the ACOS device to buffer log messages to be emailed. Messages will be emailed only when the buffer reaches 32 messages, or 30 minutes passes since the previous log message email, whichever happens first. \tn 
% Row Count 34 (+ 11)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Monitoring Tools (cont)}}  \tn
% Row 8
\SetRowColor{LightBackground}
`\#logging email filter 1 "level information pattern abc and"` & To configures a filter that matches on log messages if they are information-level messages and contain the string "abc". The messages will be buffered and not emailed immediately. \tn 
% Row Count 10 (+ 10)
% Row 9
\SetRowColor{white}
`\#logging email filter 1 "level information pattern abc and" trigger` & To reconfigures the filter to immediately email matching messages by using the trigger option. \tn 
% Row Count 15 (+ 5)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/tps-sag-monitor-cef.htm\#tps-sag-monitor-cef\_3125077683\_1454792\%3FTocPath\%3DDDoS\%2520Event\%2520Logging\%2520in\%2520Common\%2520Event\%2520Format\%7C\_\_\_\_\_0"\}\}{\bf{DDoS Event Logging in Common Event Format}}\{\{/link\}\}} \tn 
% Row Count 22 (+ 7)
% Row 11
\SetRowColor{white}
\textasciicircum{}ddos template logging default\{\{nl\}\}~~log-format-cef\{\{nl\}\}~~use-obj-name\{\{nl\}\} !\textasciicircum{} & To configure the default DDoS logging template. \tn 
% Row Count 28 (+ 6)
% Row 12
\SetRowColor{LightBackground}
\textasciicircum{}glid 2\{\{nl\}\}~~conn-limit 800000\{\{nl\}\}!\textasciicircum{} & To configure GLID 2, to set a custom connection limit. \tn 
% Row Count 31 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Monitoring Tools (cont)}}  \tn
% Row 13
\SetRowColor{LightBackground}
\textasciicircum{}ddos src entry v4-71 192.168.71.7\{\{nl\}\}~~log-enable\{\{nl\}\}~~log-periodic\{\{nl\}\}~~l4-type tcp\{\{nl\}\}~~~~glid 2\{\{nl\}\}!\textasciicircum{} & To configure a rule for source 192.168.71.7 \tn 
% Row Count 9 (+ 9)
% Row 14
\SetRowColor{white}
\textasciicircum{}glid 3\{\{nl\}\}~~bit-rate-limit 8000000\{\{nl\}\}!\textasciicircum{} & To configure GLID 3, to set a custom bandwidth limit (bit rate). \tn 
% Row Count 13 (+ 4)
% Row 15
\SetRowColor{LightBackground}
\textasciicircum{}ddos dst entry dst-81 10.10.10.8  \{\{nl\}\}~~log-enable   \{\{nl\}\}~~log-periodic   \{\{nl\}\}~~l4-type tcp     \{\{nl\}\}~~~~glid 3 \{\{nl\}\}!\textasciicircum{} & To configure a rule for protected destination 10.10.10.8 \tn 
% Row Count 22 (+ 9)
% Row 16
\SetRowColor{white}
\textasciicircum{}system ddos-attack log \{\{nl\}\}!\textasciicircum{} & To globally enables DDoS event logging. \tn 
% Row Count 24 (+ 2)
% Row 17
\SetRowColor{LightBackground}
\textasciicircum{}ddos protection enable \{\{nl\}\}!\textasciicircum{} & To enables DDoS Mitigation. \tn 
% Row Count 26 (+ 2)
% Row 18
\SetRowColor{white}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/tps-sag-monitor-snmp.htm\#tps-sag-monitor-snmp\_3106896131\_1448969\%3FTocPath\%3DSimple\%2520Network\%2520Management\%2520Protocol\%2520(SNMP)\%7C\_\_\_\_\_0"\}\}{\bf{Simple Network Management Protocol (SNMP) }}\{\{/link\}\}} \tn 
% Row Count 33 (+ 7)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Monitoring Tools (cont)}}  \tn
% Row 19
\SetRowColor{LightBackground}
`\#snmp-server enable traps` & To enable SNMP traps. \tn 
% Row Count 2 (+ 2)
% Row 20
\SetRowColor{white}
`\#snmp-server enable traps system start` & To enables system start traps. \tn 
% Row Count 4 (+ 2)
% Row 21
\SetRowColor{LightBackground}
`\#snmp-server view` & To configure an SNPM view. \tn 
% Row Count 6 (+ 2)
% Row 22
\SetRowColor{white}
`\#snmp-server view exampleview 1.2.3 included` & To creates a view called "exampleview" which includes OID 1.2.3 \tn 
% Row Count 10 (+ 4)
% Row 23
\SetRowColor{LightBackground}
`\#snmp-server SNMPv1-v2c user u1` \{\{nl\}\} `\#community read examplestring` \{\{nl\}\} `\#show running-config | sec snmp` & To configure an SNMP community string for SNMPv1 or SNMPv2c users. \tn 
% Row Count 16 (+ 6)
% Row 24
\SetRowColor{white}
`\#snmp-server view exampleview 1.2.3 included` \{\{nl\}\} `\#snmp-server group examplegroup v3 auth read exampleview` \{\{nl\}\} `\#snmp-server SNMPv3 user exampleuser group examplegroup v3 auth md5 examplepassword1 priv aes examplepassword2` \{\{nl\}\} `\#show running-config | sec snmp` & To configure an SNMP community string for SNMPv3 users. \tn 
% Row Count 30 (+ 14)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Monitoring Tools (cont)}}  \tn
% Row 25
\SetRowColor{LightBackground}
`\#remote 192.168.20.1 /24` & To restrict access to allow only specific remote hosts to access SNMP data \tn 
% Row Count 4 (+ 4)
% Row 26
\SetRowColor{white}
`\#oid 1.2.3` \{\{nl\}\} `remote 192.168.40.1 255.255.255.0` & To restrict access so that only a specific OID (1.2.3) can be accessed by the specified hosts (subnets 192.168.30.x and 192.168.40.x). \tn 
% Row Count 11 (+ 7)
% Row 27
\SetRowColor{LightBackground}
`\#snmp-server group examplegroup v3 priv read exampleview` & To configure an SNMP group. \tn 
% Row Count 14 (+ 3)
% Row 28
\SetRowColor{white}
`\#snmp-server view exampleview 1.2.3 included` \{\{nl\}\} `\#snmp-server group examplegroup v3 auth read exampleview` \{\{nl\}\} `\#snmp-server SNMPv3 user exampleuser group examplegroup v3 auth md5 examplepassword1 priv aes examplepassword2` & Shows how to configure an SNMPv3 user "exampleuser", who is a member in "examplegroup", which is part of "exampleview". \tn 
% Row Count 26 (+ 12)
% Row 29
\SetRowColor{LightBackground}
`\#snmp enable traps system ?` & Note that using the ? allows you to see all SNMP traps within the category before activating that category. \tn 
% Row Count 32 (+ 6)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Monitoring Tools (cont)}}  \tn
% Row 30
\SetRowColor{LightBackground}
`\#snmp enable traps system packet-drop` & To enables SNMP traps for all packet drops performed by the system. \tn 
% Row Count 4 (+ 4)
% Row 31
\SetRowColor{white}
`\#snmp-server location example-location` & To configure location information. \tn 
% Row Count 6 (+ 2)
% Row 32
\SetRowColor{LightBackground}
`\#snmp-server contact example-contact` & To configure contact information. \tn 
% Row Count 8 (+ 2)
% Row 33
\SetRowColor{white}
`\#snmp-server host example-trap-host` & To configure external SNMP trap receivers. \tn 
% Row Count 11 (+ 3)
% Row 34
\SetRowColor{LightBackground}
`\#snmp-server community read \seqsplit{example-community-string`} & To configure one or more read-only communities. \tn 
% Row Count 14 (+ 3)
% Row 35
\SetRowColor{white}
`snmp-server view example-view-name example-oid included` & To configure an SNMP view. \tn 
% Row Count 17 (+ 3)
% Row 36
\SetRowColor{LightBackground}
`\#snmp-server group example-grou-name v3 auth read \seqsplit{example-read-view-name`} & To configure an SNMP group. \tn 
% Row Count 21 (+ 4)
% Row 37
\SetRowColor{white}
`\#snmp-server user example-user group example-group v3 auth md5 example-password` & To configure an SNMP user. \tn 
% Row Count 26 (+ 5)
% Row 38
\SetRowColor{LightBackground}
`\#snmp-server enable traps all` & To enable the SNMP agent and SNMP traps. \tn 
% Row Count 28 (+ 2)
% Row 39
\SetRowColor{white}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/tps-sag-monitor-mirror-ports.htm\#tps-sag-monitor-mirror-ports\_2235480429\_1448969\%3FTocPath\%3DMultiple\%2520Port-Monitoring\%2520Mirror\%2520Ports\%7C\_\_\_\_\_0"\}\}{\bf{Multiple Port-Monitoring Mirror Ports}}\{\{/link\}\}} \tn 
% Row Count 35 (+ 7)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Monitoring Tools (cont)}}  \tn
% Row 40
\SetRowColor{LightBackground}
`\#mirror-port` & To configure mirror ports. \tn 
% Row Count 2 (+ 2)
% Row 41
\SetRowColor{white}
`\#mirror-port 1 ethernet 4` & Example for mirror ports. \tn 
% Row Count 4 (+ 2)
% Row 42
\SetRowColor{LightBackground}
`\#mirror-port 2 ethernet 7 output` & Example for mirror ports. \tn 
% Row Count 6 (+ 2)
% Row 43
\SetRowColor{white}
`\#mirror-port 3 ethernet 9` & Example for mirror ports. \tn 
% Row Count 8 (+ 2)
% Row 44
\SetRowColor{LightBackground}
`\#mirror-port 4 ethernet 3 input` & Example for mirror ports. \tn 
% Row Count 10 (+ 2)
% Row 45
\SetRowColor{white}
`\#show mirror` & Verifies the mirror configuration. \tn 
% Row Count 12 (+ 2)
% Row 46
\SetRowColor{LightBackground}
`\#interface ethernet 1` \{\{nl\}\} `\#monitor input 1` & To access the configuration level for Ethernet interface 1 and enable monitoring of its traffic. \tn 
% Row Count 17 (+ 5)
% Row 47
\SetRowColor{white}
`\#interface ethernet 2` \{\{nl\}\} `\#monitor output 2` & To access the configuration level for Ethernet interface 2 and enable monitoring of its traffic. \tn 
% Row Count 22 (+ 5)
% Row 48
\SetRowColor{LightBackground}
`\#interface ethernet 2` \{\{nl\}\} `\#no monitor output 2` & To removing the monitor configuration. \tn 
% Row Count 25 (+ 3)
% Row 49
\SetRowColor{white}
`\#no mirror-port 2 ethernet 7 output` & To removing the mirror port configuration. \tn 
% Row Count 28 (+ 3)
% Row 50
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/tps-sag-monitor-linkmonitor.htm\#tps-sag-monitor-linkmonitor\_2124781495\_1448969\%3FTocPath\%3DLink\%2520Monitoring\%7C\_\_\_\_\_0"\}\}{\bf{Link Monitoring}}\{\{/link\}\}} \tn 
% Row Count 34 (+ 6)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Monitoring Tools (cont)}}  \tn
% Row 51
\SetRowColor{LightBackground}
`\#ddos template monitor 1` \{\{nl\}\} `\#monitor link-down eth 5 sequence 1` \{\{nl\}\} `\#monitor link-down eth 6 sequence 2` \{\{nl\}\} `\#monitor link-down eth 9 sequence 3` \{\{nl\}\} `\#monitor link-down eth 10 sequence 4` & To configure monitor template 1 and the physical data interfaces and events to monitor. \tn 
% Row Count 11 (+ 11)
% Row 52
\SetRowColor{white}
`\#action clear sessions sequence 1\{\{nl\}\}\#action link-disable eth 5 sequence 2\{\{nl\}\}\#action link-disable eth 6 sequence 3\{\{nl\}\}\#action link-disable eth 9 sequence 4\{\{nl\}\}\#action link-disable eth 10 sequence 5\{\{nl\}\}\#exit` & To configure the actions to take when a monitored event is detected. \tn 
% Row Count 22 (+ 11)
% Row 53
\SetRowColor{LightBackground}
`\#system template monitor 1` & To activates the template, to place it into effect. \tn 
% Row Count 25 (+ 3)
% Row 54
\SetRowColor{white}
`\#clear session` & To clears only data sessions. \tn 
% Row Count 27 (+ 2)
% Row 55
\SetRowColor{LightBackground}
`\#clear sessions all` & To clear all sessions. \tn 
% Row Count 29 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{NetFlow}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/NetFlow\_Configuration\_Examples.htm\#tps-sag-monitor-netflow\_427609572\_1450265\%3FTocPath\%3DNetFlow\%2520v9\%2520and\%2520v10\%2520(IPFIX)\%7CNetFlow\%2520Configuration\%2520Examples\%7C\_\_\_\_\_0"\}\}NetFlow Configuration\{\{/link\}\}} \tn 
% Row Count 7 (+ 7)
% Row 1
\SetRowColor{white}
`\#netflow monitor test\{\{nl\}\}\#record netflow-v5\{\{nl\}\}\#record netflow-v5-ext\{\{nl\}\}\#destination 10.10.3.2\{\{nl\}\}\#show netflow monitor` & To configure a NetFlow monitor named "test" to collect all NetFlow v5-compatible flow records and export them to the host at IP 10.10.3.2 \tn 
% Row Count 15 (+ 8)
% Row 2
\SetRowColor{LightBackground}
`\#netflow monitor test\{\{nl\}\}\#protocol v10\{\{nl\}\}\#resend-template records 2\{\{nl\}\}\#source-address ip 10.10.3.1\{\{nl\}\}\#record ddos-general-stat\{\{nl\}\}\#record ddos-http-stat\{\{nl\}\}\#destination 10.10.3.2\{\{nl\}\}\#show netflow monitor` & To configure a NetFlow monitor named "test" used to export DDoS general statistics and DDoS HTTP statistics to the host IP 10.10.3.2 using IPFIX. \tn 
% Row Count 27 (+ 12)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Network Address Translation (NAT)}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/NAT\_for\_DDoS\_Mitigation\_Sources\_and\_Destinations.htm\#tps-sag-nat\_802441609\_1452560\%3FTocPath\%3DNetwork\%2520Address\%2520Translation\%7C\_\_\_\_\_2"\}\}{\bf{NAT for DDoS Mitigation Sources and Destinations}}\{\{/link\}\}} \tn 
% Row Count 7 (+ 7)
% Row 1
\SetRowColor{white}
`\#ip nat pool p1 172.168.6.100 172.168.6.100 netmask /24\{\{nl\}\}\#ddos dst entry ip-dst-entry 10.10.6.50\{\{nl\}\}\#l4-type udp\{\{nl\}\}\#stateful\{\{nl\}\}\#exit\{\{nl\}\}\#source-nat-pool p1\{\{nl\}\}\#exit` & Stateful session mode is required but is disabled by default for UDP. To configure NAT at the Layer 4 UDP level or on individual UDP ports within a rule, you first must enable stateful mode. The following example configures source NAT for client traffic allowed to go to destination 10.10.6.50 \tn 
% Row Count 22 (+ 15)
% Row 2
\SetRowColor{LightBackground}
`\#ddos dst entry ip-dest-entry 10.10.6.60\{\{nl\}\}\#dest-nat 192.168.6.50` & To configure destination NAT for destination 10.10.6.60 \tn 
% Row Count 26 (+ 4)
% Row 3
\SetRowColor{white}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Configuring\_NAT\_ALG\_for\_PPTP.htm\#tps-sag-nat\_802441609\_1450297\%3FTocPath\%3DNetwork\%2520Address\%2520Translation\%7CNAT\%2520ALG\%2520Support\%2520for\%2520PPTP\%7C\_\_\_\_\_1"\}\}{\bf{Configuring NAT ALG for PPTP}}\{\{/link\}\}} \tn 
% Row Count 33 (+ 7)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Network Address Translation (NAT) (cont)}}  \tn
% Row 4
\SetRowColor{LightBackground}
`\#access-list 1 permit 10.1.1.0 0.0.0.255\{\{nl\}\}\#ip nat pool pptp-pool 192.168.1.100 192.168.1.110 netmask /24` & Define the ACL and configure the IP address pool. \tn 
% Row Count 6 (+ 6)
% Row 5
\SetRowColor{white}
`\#interface ethernet 1\{\{nl\}\}\#ip address 10.2.2.254 255.255.255.0\{\{nl\}\}\#ip nat inside\{\{nl\}\}\#exit\{\{nl\}\}\#interface ethernet 2\{\{nl\}\}\#ip address 10.3.3.254 255.255.255.0\{\{nl\}\}\#ip nat outside` & Enable inside source NAT and outside source NAT on the interfaces. \tn 
% Row Count 16 (+ 10)
% Row 6
\SetRowColor{LightBackground}
`show ip nat alg pptp statistics` & To displays PPTP NAT ALG statistics. \tn 
% Row Count 18 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{Make sure you are in Global Configuration mode.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/Session\_Access\_Levels.htm\#tps-sag-cli-using\_1182520819\_1449727\%3FTocPath\%3DUsing\%2520the\%2520CLI\%7CSession\%2520Access\%2520Levels\%7C\_\_\_\_\_0"\}\}{\bf{Session Access Levels}}\{\{/link\}\}} \tn 
% Row Count 6 (+ 6)
% Row 1
\SetRowColor{white}
`ACOS\textgreater{}` & User EXEC Level. This is the first level entered when a CLI session begins. At this level, users can view basic system information but cannot configure system or port parameters. (\textgreater{}) \tn 
% Row Count 16 (+ 10)
% Row 2
\SetRowColor{LightBackground}
`ACOS\#` & Privileged EXEC Level. Critical commands (configuration and management) require that the user be at the "Privileged EXEC" level. To change to the Privileged EXEC level, type `enable` then press Enter at the `ACOS\textgreater{}` prompt. (\#) \tn 
% Row Count 28 (+ 12)
% Row 3
\SetRowColor{white}
`ACOS(config)\#` & Privileged EXEC Level - Config Mode. The Privileged EXEC level's configuration mode is used to configure the system IP address and to configure switching and routing features. To access the configuration mode, you must first be logged into the Privileged EXEC level. Enter the `config` command. \tn 
% Row Count 43 (+ 15)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference (cont)}}  \tn
% Row 4
\SetRowColor{LightBackground}
`?` & System prompt to display a list of available commands for each command mode. The context-sensitive help feature provides a list of the arguments and keywords available for any command. \tn 
% Row Count 10 (+ 10)
% Row 5
\SetRowColor{white}
`\#terminal history size 500\{\{nl\}\}\#show terminal | sec history` & To set the buffer size for the current session. For example, to set the buffer to 500, then verify the change with the show terminal command. \tn 
% Row Count 18 (+ 8)
% Row 6
\SetRowColor{LightBackground}
`no terminal history size` & To reset the buffer size for this session to the default value. \tn 
% Row Count 22 (+ 4)
% Row 7
\SetRowColor{white}
`\textgreater{} show history` & While in EXEC mode, lists the most recent commands entered. \tn 
% Row Count 25 (+ 3)
% Row 8
\SetRowColor{LightBackground}
`begin string` & Begins the output with the line containing the specified string. \tn 
% Row Count 29 (+ 4)
% Row 9
\SetRowColor{white}
`include string` & Displays only the output lines that contain the specified string. \tn 
% Row Count 33 (+ 4)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference (cont)}}  \tn
% Row 10
\SetRowColor{LightBackground}
`exclude string` & Displays only the output lines that do not contain the specified string. \tn 
% Row Count 4 (+ 4)
% Row 11
\SetRowColor{white}
`section string` & Displays only the lines for the specified section (for example, "ddos dst entry", or "logging"). To display all DDoS-related configuration lines, you can enter "ddos". \tn 
% Row Count 13 (+ 9)
% Row 12
\SetRowColor{LightBackground}
`|` & Delimiter between the `show` command and the display filter. \tn 
% Row Count 16 (+ 3)
% Row 13
\SetRowColor{white}
`show arp | include 192.168.1.3*` & The output filter in this example displays only the ARP entries that contain IP addresses that match "192.168.1.3" and any value following "3". The asterisk ( * ) matches on any pattern following the "3". \tn 
% Row Count 27 (+ 11)
% Row 14
\SetRowColor{LightBackground}
`show startup-config | section logging` & To displays the startup-config lines for "logging". \tn 
% Row Count 30 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference (cont)}}  \tn
% Row 15
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/tps-sag-cli-exec.htm\#tps-sag-cli-exec\_211102514\_1569686\%3FTocPath\%3DEXEC\%2520Commands\%7C\_\_\_\_\_0"\}\}{\bf{EXEC Commands}}\{\{/link\}\}} \tn 
% Row Count 5 (+ 5)
% Row 16
\SetRowColor{white}
`enable` & Enter privileged EXEC mode, or any other security level set by a system administrator. \tn 
% Row Count 10 (+ 5)
% Row 17
\SetRowColor{LightBackground}
`exit` & When used from User EXEC mode, this command closes an active terminal session by logging off the system. In any other mode, it will move the user to the previous configuration level. \tn 
% Row Count 20 (+ 10)
% Row 18
\SetRowColor{white}
`help` & Display a description of the interactive help system of the ACOS device. \tn 
% Row Count 24 (+ 4)
% Row 19
\SetRowColor{LightBackground}
`no` & Most configuration commands have a `no` form. Typically, you use the no form to disable a feature or function. The command without the `no` keyword is used to re-enable a disabled feature or to enable a feature that is disabled by default. \tn 
% Row Count 36 (+ 12)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference (cont)}}  \tn
% Row 20
\SetRowColor{LightBackground}
`ping` & Send an ICMP echo packet to test network connectivity. \tn 
% Row Count 3 (+ 3)
% Row 21
\SetRowColor{white}
`show` & Show system or configuration information. \tn 
% Row Count 6 (+ 3)
% Row 22
\SetRowColor{LightBackground}
`ssh` & Establish a Secure Shell (SSH) connection from the Thunder Series to another device. \tn 
% Row Count 11 (+ 5)
% Row 23
\SetRowColor{white}
`telnet` & Open a Telnet tunnel connection from the Thunder Series to another device. \tn 
% Row Count 15 (+ 4)
% Row 24
\SetRowColor{LightBackground}
`traceroute` & Display the router hops through which a packet sent from the ACOS device can reach a remote device. \tn 
% Row Count 20 (+ 5)
% Row 25
\SetRowColor{white}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/tps-sag-cli-priv-exec.htm\#tps-sag-cli-priv-exec\_1609068458\_1569686\%3FTocPath\%3DPrivileged\%2520EXEC\%2520Commands\%7C\_\_\_\_\_0"\}\}{\bf{Privileged EXEC Commands}}\{\{/link\}\}} \tn 
% Row Count 26 (+ 6)
% Row 26
\SetRowColor{LightBackground}
`axdebug` & Access the AXdebug subsystem. \tn 
% Row Count 28 (+ 2)
% Row 27
\SetRowColor{white}
`backup log` & Configure log backup options and save a backup of the system log. \tn 
% Row Count 32 (+ 4)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference (cont)}}  \tn
% Row 28
\SetRowColor{LightBackground}
`backup system` & Back up the system. The startup-config file, and SSL certificates and keys will be backed up to a tar file. \tn 
% Row Count 6 (+ 6)
% Row 29
\SetRowColor{white}
`clear` & Clear statistics or reset functions. Sub-command parameters are required for specific sub-commands. \tn 
% Row Count 11 (+ 5)
% Row 30
\SetRowColor{LightBackground}
`clock` & Set the system time and date. \tn 
% Row Count 13 (+ 2)
% Row 31
\SetRowColor{white}
`configure` & Enter Global configuration mode from the Privileged EXEC mode. \tn 
% Row Count 17 (+ 4)
% Row 32
\SetRowColor{LightBackground}
`ddos \seqsplit{run-time-user-string`} & Set the DDoS runtime user string. The runtime user string provides a way to add a nonpersistent memo to the device. The runtime user string does not appear in the runningconfig and is not saved across reboots or reloads. \tn 
% Row Count 28 (+ 11)
% Row 33
\SetRowColor{white}
`debug` & Access debug options. \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference (cont)}}  \tn
% Row 34
\SetRowColor{LightBackground}
`diff` & Display a side-by-side comparison of the commands in a pair of locally stored configurations. \tn 
% Row Count 5 (+ 5)
% Row 35
\SetRowColor{white}
`disable` & Exit the Privileged EXEC mode and enter the EXEC mode. \tn 
% Row Count 8 (+ 3)
% Row 36
\SetRowColor{LightBackground}
\seqsplit{`enable-bgp-advertisement`} & Enable BGP advertisements. \tn 
% Row Count 10 (+ 2)
% Row 37
\SetRowColor{white}
`exit` & Exit the Privileged EXEC mode and enter the EXEC Mode. \tn 
% Row Count 13 (+ 3)
% Row 38
\SetRowColor{LightBackground}
`export` & Export a file to a remote site using the specified transport method. \tn 
% Row Count 17 (+ 4)
% Row 39
\SetRowColor{white}
`help` & Display a description of the interactive help system of the ACOS device. \tn 
% Row Count 21 (+ 4)
% Row 40
\SetRowColor{LightBackground}
`import` & Get a file from a remote site. \tn 
% Row Count 23 (+ 2)
% Row 41
\SetRowColor{white}
`locale` & Set the locale for the current terminal session. \tn 
% Row Count 26 (+ 3)
% Row 42
\SetRowColor{LightBackground}
`no` & Negate a command or set it to its default setting. \tn 
% Row Count 29 (+ 3)
% Row 43
\SetRowColor{white}
`ping` & Test network connectivity. \tn 
% Row Count 31 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference (cont)}}  \tn
% Row 44
\SetRowColor{LightBackground}
`reboot` & Reboot the device. \tn 
% Row Count 1 (+ 1)
% Row 45
\SetRowColor{white}
`reload` & Restart ACOS system processes and reload the startup-config, without rebooting. \tn 
% Row Count 5 (+ 4)
% Row 46
\SetRowColor{LightBackground}
`repeat` & Periodically re-enter a `show` command. \tn 
% Row Count 7 (+ 2)
% Row 47
\SetRowColor{white}
`show` & Display system or configuration information. \tn 
% Row Count 10 (+ 3)
% Row 48
\SetRowColor{LightBackground}
`shutdown` & Schedule a system shutdown at a specified time or after a specified interval, or cancel a scheduled system shutdown. \tn 
% Row Count 16 (+ 6)
% Row 49
\SetRowColor{white}
`ssh` & Establish a Secure Shell (SSH) connection from the Thunder Series to another device. \tn 
% Row Count 21 (+ 5)
% Row 50
\SetRowColor{LightBackground}
`telnet` & Establish a Telnet connection from the ACOS device to another device. \tn 
% Row Count 25 (+ 4)
% Row 51
\SetRowColor{white}
`terminal` & Set terminal display parameters for the current session. \tn 
% Row Count 28 (+ 3)
% Row 52
\SetRowColor{LightBackground}
`traceroute` & Display the route hops to a destination. \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference (cont)}}  \tn
% Row 53
\SetRowColor{LightBackground}
`write force` & Forces the ACOS device to save the configuration regardless of whether the system is ready. \tn 
% Row Count 5 (+ 5)
% Row 54
\SetRowColor{white}
`write memory` & Write the running-config to a configuration profile. \tn 
% Row Count 8 (+ 3)
% Row 55
\SetRowColor{LightBackground}
`write terminal` & Display the current running-config on your terminal. \tn 
% Row Count 11 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{\{\{link="https://documentation.a10networks.com/ACOS/502x/502-P2/html/tps\_sag\_Responsive\_HTML5/Default.htm\#tps-sagTOC/tps-sag-cli-global-config.htm\#tps-sag-cli-global-config\_2276673297\_1569686\%3FTocPath\%3DGlobal\%2520Configuration\%2520Commands\%7C\_\_\_\_\_0"\}\}{\bf{Global Configuration Commands}}\{\{/link\}\}} \tn 
% Row Count 6 (+ 6)
% Row 1
\SetRowColor{white}
`access-list` & Standard. Configure a standard Access Control List (ACL) to permit or deny source IP addresses. \tn 
% Row Count 11 (+ 5)
% Row 2
\SetRowColor{LightBackground}
`access-list` & Extended. Configure an extended Access Control List (ACL) to permit or deny traffic based on source and destination IP addresses, IP protocol, and TCP/UDP ports. \tn 
% Row Count 20 (+ 9)
% Row 3
\SetRowColor{white}
`accounting` & Configure TACACS+ as the accounting method for recording information about user activities. \tn 
% Row Count 25 (+ 5)
% Row 4
\SetRowColor{LightBackground}
`admin` & Configure an admin account for management access to ACOS. \tn 
% Row Count 28 (+ 3)
% Row 5
\SetRowColor{white}
`admin-lockout` & Set lockout parameters for admin sessions. \tn 
% Row Count 31 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 6
\SetRowColor{LightBackground}
`admin-session clear` & Clear current ACOS admin sessions. \tn 
% Row Count 2 (+ 2)
% Row 7
\SetRowColor{white}
`arp` & Create a static ARP entry. \tn 
% Row Count 4 (+ 2)
% Row 8
\SetRowColor{LightBackground}
`arp-timeout` & Change the aging timer for dynamic ARP entries. \tn 
% Row Count 7 (+ 3)
% Row 9
\SetRowColor{white}
`audit` & Configure command auditing. \tn 
% Row Count 9 (+ 2)
% Row 10
\SetRowColor{LightBackground}
`authentication console type` & Configure a console authentication type. \tn 
% Row Count 11 (+ 2)
% Row 11
\SetRowColor{white}
`authentication enable` & Configuration authentication of admin enable (Privileged mode) access. \tn 
% Row Count 15 (+ 4)
% Row 12
\SetRowColor{LightBackground}
`authentication login privilege-mode` & Place admins into the CLI directly at the Privileged EXEC level following successful authentication. The admin does not need to navigate to the Privileged EXEC level from the User EXEC level. \tn 
% Row Count 25 (+ 10)
% Row 13
\SetRowColor{white}
`authentication mode` & Enable tiered authentication. \tn 
% Row Count 27 (+ 2)
% Row 14
\SetRowColor{LightBackground}
`authentication \seqsplit{multiple-auth-reject`} & Configure support for multiple concurrent admin sessions using the same account. \tn 
% Row Count 31 (+ 4)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 15
\SetRowColor{LightBackground}
`authentication type` & Set the authentication method used to authenticate administrative access to ACOS. \tn 
% Row Count 5 (+ 5)
% Row 16
\SetRowColor{white}
`authorization` & Configure authorization for controlling access to functions in the CLI. The ACOS device can use TACACS+ for authorizing commands executed under a specified privilege level. This command also allows you to specify the level for authorization debugging. \tn 
% Row Count 18 (+ 13)
% Row 17
\SetRowColor{LightBackground}
`backup log` & Configure log backup options and save a backup of the system log. \tn 
% Row Count 22 (+ 4)
% Row 18
\SetRowColor{white}
`backup store` & Configure and save file access information for backup. When you back up system information, you can save typing by specifying the name of the store instead of the options in the store. \tn 
% Row Count 32 (+ 10)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 19
\SetRowColor{LightBackground}
`backup system` & Back up the system. The startup-config file, and SSL certificates and keys will be backed up to a tar file. \tn 
% Row Count 6 (+ 6)
% Row 20
\SetRowColor{white}
`backup-periodic` & Schedule periodic backups. \tn 
% Row Count 8 (+ 2)
% Row 21
\SetRowColor{LightBackground}
`banner` & Set the banners to be displayed when an admin logs onto the CLI or accesses the Privileged EXEC mode. \tn 
% Row Count 14 (+ 6)
% Row 22
\SetRowColor{white}
`bfd echo` & Enables echo support for Bidirectional Forwarding Detection (BFD). \tn 
% Row Count 18 (+ 4)
% Row 23
\SetRowColor{LightBackground}
`bfd enable` & Globally enable BFD packet processing. \tn 
% Row Count 20 (+ 2)
% Row 24
\SetRowColor{white}
`bfd interval` & Configure BFD timers. \tn 
% Row Count 22 (+ 2)
% Row 25
\SetRowColor{LightBackground}
`bgp` & The commands in this section apply globally to the BGP process running on the ACOS device. \tn 
% Row Count 27 (+ 5)
% Row 26
\SetRowColor{white}
`bootimage` & Specify the boot image location from which to load the system image the next time the Thunder Series is rebooted. \tn 
% Row Count 33 (+ 6)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 27
\SetRowColor{LightBackground}
`boot-block-fix` & Repair the master boot record (MBR) on the hard drive or compact flash. \tn 
% Row Count 4 (+ 4)
% Row 28
\SetRowColor{white}
`bridge-vlan-group` & Configure a bridge VLAN group for VLAN-to-VLAN bridging. \tn 
% Row Count 7 (+ 3)
% Row 29
\SetRowColor{LightBackground}
`capture-config` & This command configures DDoS packet capture so that the packets causing DDoS violations can be reviewed and analyzed. \tn 
% Row Count 13 (+ 6)
% Row 30
\SetRowColor{white}
`class-list` & Configure a class list. \tn 
% Row Count 15 (+ 2)
% Row 31
\SetRowColor{LightBackground}
\seqsplit{`convert-startup-config`} & Convert configuration profile from version 3.0/3.1 to 3.2. \tn 
% Row Count 18 (+ 3)
% Row 32
\SetRowColor{white}
`copy` & Copy a running-config or startup-config. \tn 
% Row Count 20 (+ 2)
% Row 33
\SetRowColor{LightBackground}
`ddos` & Configure DDoS Mitigation settings. \tn 
% Row Count 22 (+ 2)
% Row 34
\SetRowColor{white}
`debug` & Legacy debug command. 	It is recommended to use the AXdebug subsystem instead of these `debug` commands. \tn 
% Row Count 28 (+ 6)
% Row 35
\SetRowColor{LightBackground}
`delete` & Delete an axdebug capture file. \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 36
\SetRowColor{LightBackground}
`diff` & Display a side-by-side comparison of the commands in a pair of locally stored configurations. \tn 
% Row Count 5 (+ 5)
% Row 37
\SetRowColor{white}
`disable-failsafe` & Disable fail-safe monitoring for software-related errors. \tn 
% Row Count 8 (+ 3)
% Row 38
\SetRowColor{LightBackground}
`disable-management service` & Disable management access to specific protocols on specific Ethernet interfaces. \tn 
% Row Count 12 (+ 4)
% Row 39
\SetRowColor{white}
`do` & Run a Privileged EXEC level command from a configuration level prompt, without leaving the configuration level. \tn 
% Row Count 18 (+ 6)
% Row 40
\SetRowColor{LightBackground}
`domain-group` & Create a group of related `domain-list` configurations \tn 
% Row Count 21 (+ 3)
% Row 41
\SetRowColor{white}
`domain-list` & Create a domain classification list. \tn 
% Row Count 23 (+ 2)
% Row 42
\SetRowColor{LightBackground}
`enable-core` & Change the file size of core dumps. \tn 
% Row Count 25 (+ 2)
% Row 43
\SetRowColor{white}
`enable-management` & Enable management access to specific protocols on specific Ethernet interfaces. \tn 
% Row Count 29 (+ 4)
% Row 44
\SetRowColor{LightBackground}
`enable-password` & Set the enable password, which secures access to the Privileged EXEC level of the CLI. \tn 
% Row Count 34 (+ 5)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 45
\SetRowColor{LightBackground}
`end` & Return to the Privileged EXEC level of the CLI. \tn 
% Row Count 3 (+ 3)
% Row 46
\SetRowColor{white}
`environment temperature threshold` & Configure the temperature condition under which a log is generated. \tn 
% Row Count 7 (+ 4)
% Row 47
\SetRowColor{LightBackground}
`environment update-interval` & Configure the hardware polling interval for fault detection and log generation. \tn 
% Row Count 11 (+ 4)
% Row 48
\SetRowColor{white}
`erase` & Erase the startup-config file. This command returns the device to its factory default configuration after the next reload or reboot. \tn 
% Row Count 18 (+ 7)
% Row 49
\SetRowColor{LightBackground}
`exit` & Return to the Privileged EXEC level of the CLI. \tn 
% Row Count 21 (+ 3)
% Row 50
\SetRowColor{white}
`export` & Export a file to a remote site using the specified transport method. \tn 
% Row Count 25 (+ 4)
% Row 51
\SetRowColor{LightBackground}
`export-periodic` & Export file to a remote site periodically. \tn 
% Row Count 28 (+ 3)
% Row 52
\SetRowColor{white}
`fail-safe` & Configure fail-safe automatic recovery. \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 53
\SetRowColor{LightBackground}
`fan-speed` & Control fan speed setting. \tn 
% Row Count 2 (+ 2)
% Row 54
\SetRowColor{white}
`glid` & Configure a Global Limit ID (GLID). A GLID is a set of traffic limits that can be used with other features, such as DDoS Mitigation. \tn 
% Row Count 9 (+ 7)
% Row 55
\SetRowColor{LightBackground}
`hd-monitor enable` & Enable hard disk monitoring on your ACOS device. \tn 
% Row Count 12 (+ 3)
% Row 56
\SetRowColor{white}
`hostname` & Set the ACOS device's hostname. \tn 
% Row Count 14 (+ 2)
% Row 57
\SetRowColor{LightBackground}
`icmpv6-rate-limit` & Configure ICMPv6 rate limiting for IPv6 to protect against denial-of-service (DoS) attacks. \tn 
% Row Count 19 (+ 5)
% Row 58
\SetRowColor{white}
`icmp-rate-limit` & Configure ICMP rate limiting, to protect against denial-of-service (DoS) attacks. \tn 
% Row Count 24 (+ 5)
% Row 59
\SetRowColor{LightBackground}
`import` & Get a file from a remote site. \tn 
% Row Count 26 (+ 2)
% Row 60
\SetRowColor{white}
`import-periodic` & Get files from a remote site periodically. \tn 
% Row Count 29 (+ 3)
% Row 61
\SetRowColor{LightBackground}
`interface` & Access the CLI configuration level for an interface. \tn 
% Row Count 32 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 62
\SetRowColor{LightBackground}
`ip` & Configure global IP settings. \tn 
% Row Count 2 (+ 2)
% Row 63
\SetRowColor{white}
`ipmi` & Configure Intelligent Platform Management Interface (IPMI) settings on the ACOS device. \tn 
% Row Count 7 (+ 5)
% Row 64
\SetRowColor{LightBackground}
`ipv6` & Configure global IPv6 settings. \tn 
% Row Count 9 (+ 2)
% Row 65
\SetRowColor{white}
`key` & Configure a key chain for use by routing authentication features. \tn 
% Row Count 13 (+ 4)
% Row 66
\SetRowColor{LightBackground}
`lacp-passthrough` & Configure an LACP tunnel for LACP passthrough. This feature allows the ACOS device to forward traffic on one trunk that originates on another trunk that is down. With this feature, if an LACP trunk goes down, the other trunk is used to continue connectivity for the traffic. \tn 
% Row Count 27 (+ 14)
% Row 67
\SetRowColor{white}
`lacp system-priority` & Set the Link Aggregation Control Protocol (LACP) priority. \tn 
% Row Count 30 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 68
\SetRowColor{LightBackground}
`ldap-server` & Set Lightweight Directory Access Protocol (LDAP) parameters for authenticating administrative access to the ACOS device. \tn 
% Row Count 6 (+ 6)
% Row 69
\SetRowColor{white}
`link` & Link the "startup-config" token to the specified configuration profile. By default, "startup-config" is linked to "default", which means the configuration profile stored in the image area from which the ACOS device most recently rebooted. \tn 
% Row Count 19 (+ 13)
% Row 70
\SetRowColor{LightBackground}
`lldp enable` & Enable the Link Layer Detection Protocol (LLDP). You can enable LLDP to either receive only, transmit only, or transmit and receive. \tn 
% Row Count 26 (+ 7)
% Row 71
\SetRowColor{white}
`lldp management-address` & Specify the hostname or IP address and Ethernet interface to use as the management interface for the LLDP agent on the ACOS device. \tn 
% Row Count 33 (+ 7)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 72
\SetRowColor{LightBackground}
`lldp notification interval` & Configure the interval between transmission of LLDP notifications during normal transmission periods. (In the IEEE 802.3AB specification, this the msgTxInterval parameter.) \tn 
% Row Count 9 (+ 9)
% Row 73
\SetRowColor{white}
`lldp system-description` & Defines the alpha-numeric string that describes the system in the network. \tn 
% Row Count 13 (+ 4)
% Row 74
\SetRowColor{LightBackground}
`lldp system-name` & Defines the string that will be assigned as the system name. \tn 
% Row Count 16 (+ 3)
% Row 75
\SetRowColor{white}
`lldp tx fast-count` & Set the initial value for the txFast variable, which determines the number of LLDP data packets that are transmitted during a fast transmission period. (In the IEEE 802.3AB specification, this the txFastInit parameter.) \tn 
% Row Count 27 (+ 11)
% Row 76
\SetRowColor{LightBackground}
`lldp tx fast-interval` & Configure the LLDP PDU transmission interval for fast periods. (In the IEEE 802.3AB specification, this the msgFastTx parameter.) \tn 
% Row Count 34 (+ 7)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 77
\SetRowColor{LightBackground}
`lldp tx hold` & Configure the time to live (TTL) transmission interval that is carried in LLDP frames during normal (non-fast) periods. (In the IEEE 802.3AB specification, this the msgTxHold parameter.) \tn 
% Row Count 10 (+ 10)
% Row 78
\SetRowColor{white}
`lldp tx interval` & Configure the LLDP packet transmit interval. (In the IEEE 802.3AB specification, this the msgTxInterval parameter.) \tn 
% Row Count 16 (+ 6)
% Row 79
\SetRowColor{LightBackground}
`lldp tx reinit-delay` & Configure the delay between a change to administrative "disabled" status of LDDP and reinitialization of the protocol. \tn 
% Row Count 23 (+ 7)
% Row 80
\SetRowColor{white}
`locale` & Set the locale for the current terminal session. \tn 
% Row Count 26 (+ 3)
% Row 81
\SetRowColor{LightBackground}
`logging auditlog host` & Configure audit logging to an external server. \tn 
% Row Count 29 (+ 3)
% Row 82
\SetRowColor{white}
`logging buffered` & Configure the event log on the ACOS device. \tn 
% Row Count 32 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 83
\SetRowColor{LightBackground}
`logging console` & Set the logging level for messages sent to the console. \tn 
% Row Count 3 (+ 3)
% Row 84
\SetRowColor{white}
`logging email-address` & Specify the email addresses to which to send event messages. \tn 
% Row Count 6 (+ 3)
% Row 85
\SetRowColor{LightBackground}
`logging email buffer` & Configure log email settings. \tn 
% Row Count 8 (+ 2)
% Row 86
\SetRowColor{white}
`logging email filter` & Configure a filter for emailing log messages. \tn 
% Row Count 11 (+ 3)
% Row 87
\SetRowColor{LightBackground}
`logging export` & Send the messages that are in the event buffer to an external file server. \tn 
% Row Count 15 (+ 4)
% Row 88
\SetRowColor{white}
`logging facility` & Enable logging facilities. \tn 
% Row Count 17 (+ 2)
% Row 89
\SetRowColor{LightBackground}
`logging host` & Specify a Syslog server to which to send event messages. \tn 
% Row Count 20 (+ 3)
% Row 90
\SetRowColor{white}
`logging monitor` & Set the logging level for messages sent to the terminal monitor. \tn 
% Row Count 24 (+ 4)
% Row 91
\SetRowColor{LightBackground}
`logging syslog` & Set the syslog logging level for events sent to the syslog host. \tn 
% Row Count 28 (+ 4)
% Row 92
\SetRowColor{white}
`logging trap` & Set the logging level for traps sent to the SNMP host. \tn 
% Row Count 31 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 93
\SetRowColor{LightBackground}
`mac-address` & Configure a static MAC address. \tn 
% Row Count 2 (+ 2)
% Row 94
\SetRowColor{white}
`mac-age-time` & Set the aging time for dynamic (learned) MAC entries. An entry that remains unused for the duration of the aging time is removed from the MAC table. \tn 
% Row Count 10 (+ 8)
% Row 95
\SetRowColor{LightBackground}
`maximum-paths` & Change the maximum number of paths a route can have in the Forwarding Information Base (FIB). \tn 
% Row Count 15 (+ 5)
% Row 96
\SetRowColor{white}
`mirror-port` & Specify a port to receive copies of another port's traffic. \tn 
% Row Count 19 (+ 4)
% Row 97
\SetRowColor{LightBackground}
`monitor` & Specify event thresholds for utilization of resources. \tn 
% Row Count 22 (+ 3)
% Row 98
\SetRowColor{white}
`multi-config` & Enable simultaneous admin sessions. \tn 
% Row Count 24 (+ 2)
% Row 99
\SetRowColor{LightBackground}
`multi-ctrl-cpu` & Enable use of more than one CPU for control processing. \tn 
% Row Count 27 (+ 3)
% Row 100
\SetRowColor{white}
`netflow common \seqsplit{max-packet-queue-time`} & Specify the maximum amount of time ACOS can hold onto a NetFlow record packet in the queue before sending it to the NetFlow collector. ACOS holds a NetFlow packet in the queue until the packet payload is full of record data or until the queue timer expires. \tn 
% Row Count 40 (+ 13)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 101
\SetRowColor{LightBackground}
`netflow common selector-algorithm random` & Configures the algorithm that Netflow uses to sample traffic. The only option is the random algorithm. \tn 
% Row Count 6 (+ 6)
% Row 102
\SetRowColor{white}
`netflow monitor` & Enable ACOS to act as a NetFlow exporter, for monitoring traffic and exporting the data to one or more NetFlow collectors for analysis. \tn 
% Row Count 13 (+ 7)
% Row 103
\SetRowColor{LightBackground}
`no` & Remove a configuration command from the running configuration. \tn 
% Row Count 17 (+ 4)
% Row 104
\SetRowColor{white}
`ntp` & Configure Network Time Protocol (NTP) parameters. \tn 
% Row Count 20 (+ 3)
% Row 105
\SetRowColor{LightBackground}
`ntp-status` & Get the status of the NTP servers. \tn 
% Row Count 22 (+ 2)
% Row 106
\SetRowColor{white}
`overlay-tunnel` & Configure a remote tunnel endpoint for remote sites where protected objects reside. This can be used in conjunction with OSPF neighbor adjacency via GRE or VXLAN tunnels. \tn 
% Row Count 31 (+ 9)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 107
\SetRowColor{LightBackground}
`pki delete` & Deletes a self-signed certificate or the CSR file. \tn 
% Row Count 3 (+ 3)
% Row 108
\SetRowColor{white}
`radius-server host` & Set RADIUS parameters, for authenticating administrative access to the ACOS device. \tn 
% Row Count 8 (+ 5)
% Row 109
\SetRowColor{LightBackground}
`restore` & Restore the startup-config, aFleX policy files, \textless{}\textless{}when aFlex support is added\textgreater{}\textgreater{} and SSL certificates and keys from a .tar file previously created by the backup command. The restored configuration takes effect following a reboot. \tn 
% Row Count 20 (+ 12)
% Row 110
\SetRowColor{white}
`router log file` & Configure router logging to a local file. \tn 
% Row Count 23 (+ 3)
% Row 111
\SetRowColor{LightBackground}
`router log log-buffer` & Sends router logs to the logging buffer. \tn 
% Row Count 25 (+ 2)
% Row 112
\SetRowColor{white}
`router protocol` & Enter the configuration mode for a dynamic routing protocol. \tn 
% Row Count 28 (+ 3)
% Row 113
\SetRowColor{LightBackground}
`route-map` & Configure a route map. \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 114
\SetRowColor{LightBackground}
`running-config` & Enable display of file information in the running-config. \tn 
% Row Count 3 (+ 3)
% Row 115
\SetRowColor{white}
`run-hw-diag` & Access the hardware diagnostics menu. \tn 
% Row Count 5 (+ 2)
% Row 116
\SetRowColor{LightBackground}
`sflow` & Configure parameters for sFlow packet sampling. \tn 
% Row Count 8 (+ 3)
% Row 117
\SetRowColor{white}
`single-board-mode forced` & On the Thunder 14045 device with dual processing modules, this command causes all traffic to be processed by the master only. \tn 
% Row Count 15 (+ 7)
% Row 118
\SetRowColor{LightBackground}
`smtp` & Configure a Simple Mail Transfer Protocol (SMTP) server to use for sending emails from the ACOS device. \tn 
% Row Count 21 (+ 6)
% Row 119
\SetRowColor{white}
\seqsplit{`ssh-login-grace-time`} & Configures the time to establish an SSH connection. \tn 
% Row Count 24 (+ 3)
% Row 120
\SetRowColor{LightBackground}
`sshd` & Perform an SSHD operation on the system. \tn 
% Row Count 26 (+ 2)
% Row 121
\SetRowColor{white}
`system all-vlan-limit` & Set the global traffic limits for all VLANs. The limit applies system-wide to all VLANs; collectively, all ACOS device VLANs cannot exceed the specified limit. \tn 
% Row Count 34 (+ 8)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 2 (cont)}}  \tn
% Row 122
\SetRowColor{LightBackground}
`system anomaly` & Enable logging for packet anomaly events. This type of logging applies to system-wide attacks such as SYN attacks. \tn 
% Row Count 6 (+ 6)
% Row 123
\SetRowColor{white}
`system asic-mmu-fail-safe` & Configures fail-safe parameters for the Layer 2/3 ASIC. \tn 
% Row Count 9 (+ 3)
% Row 124
\SetRowColor{LightBackground}
`system attack` & Enable logging for DDoS attacks. This type of logging applies to violations of DDoS Mitigation rules. \tn 
% Row Count 15 (+ 6)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 3}}  \tn
% Row 0
\SetRowColor{LightBackground}
`system cpu-load-sharing` & Configure thresholds for CPU load sharing. If a threshold is exceeded, CPU load sharing is activated to relieve the stressed CPUs. When activated, CPU load sharing distributes processing of the stressed CPU's operations across the device's other CPUs. Load sharing remains in effect until the threshold is no longer exceeded. \tn 
% Row Count 17 (+ 17)
% Row 1
\SetRowColor{white}
`system ddos-attack log` & Enable logging for DDoS attack events. \tn 
% Row Count 19 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`system default-mtu` & Configure the MTU for all interfaces. \tn 
% Row Count 21 (+ 2)
% Row 3
\SetRowColor{white}
`system ext-only-logging` & Enable external only logging for packet driven DDoS logs. When enabled, DDoS non-event logs will not be displayed through `show log`. Other types of logs are unaffected. \tn 
% Row Count 30 (+ 9)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 3 (cont)}}  \tn
% Row 4
\SetRowColor{LightBackground}
`system fips` & Enable/Disable FIPS Mode for ACOS devices. \tn 
% Row Count 3 (+ 3)
% Row 5
\SetRowColor{white}
`system glid` & Globally apply the specified GLID to the whole system. \tn 
% Row Count 6 (+ 3)
% Row 6
\SetRowColor{LightBackground}
\seqsplit{`system-jumbo-global} enable-jumbo` & Globally enable jumbo frame support. In this release, a jumbo frame is an Ethernet frame that is more than 1522 bytes long. \tn 
% Row Count 13 (+ 7)
% Row 7
\SetRowColor{white}
`system module-ctrl-cpu` & Throttle CLI and SNMP output when control CPU utilization reaches a specific threshold. \tn 
% Row Count 18 (+ 5)
% Row 8
\SetRowColor{LightBackground}
`system mon-template monitor` & Configure monitoring of a set of ports for link-state changes, and change the link states of another set of ports, or clear sessions based on the detected changes. \tn 
% Row Count 27 (+ 9)
% Row 9
\SetRowColor{white}
`system pbslb sockstress-disable` & Globally disable Sockstress protection on the system. \tn 
% Row Count 30 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 3 (cont)}}  \tn
% Row 10
\SetRowColor{LightBackground}
`system per-vlan-limit` & Configure the packet flooding limit per VLAN. The limit applies to each VLAN. No individual can exceed the specified limit. \tn 
% Row Count 7 (+ 7)
% Row 11
\SetRowColor{white}
`system-reset` & Restore the ACOS device to its factory default settings. \tn 
% Row Count 10 (+ 3)
% Row 12
\SetRowColor{LightBackground}
`system resource-usage` & Change the capacity of a system resource. \tn 
% Row Count 13 (+ 3)
% Row 13
\SetRowColor{white}
`system \seqsplit{session-reclaim-limit`} & Set limits for SMP session reclaim; this controls how the system should recover and reclaim DDoS entries. \tn 
% Row Count 19 (+ 6)
% Row 14
\SetRowColor{LightBackground}
`system template-bind monitor` & Apply a monitor template to the whole TPS system. \tn 
% Row Count 22 (+ 3)
% Row 15
\SetRowColor{white}
`system timeout-value` & Set the timeout to stop transferring a file. \tn 
% Row Count 25 (+ 3)
% Row 16
\SetRowColor{LightBackground}
`system trunk load-balance` & Configure trunk load balancing for Layer 2 switched packets (applicable for both static and LACP trunks). \tn 
% Row Count 31 (+ 6)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 3 (cont)}}  \tn
% Row 17
\SetRowColor{LightBackground}
`system ve-mac-scheme` & Configure MAC address assignment for Virtual Ethernet (VE) interfaces. \tn 
% Row Count 4 (+ 4)
% Row 18
\SetRowColor{white}
\seqsplit{`system-jumbo-global} enable-jumbo` & Globally enable jumbo frame support. In this release, a jumbo frame is an Ethernet frame that is more than 1522 bytes long. \tn 
% Row Count 11 (+ 7)
% Row 19
\SetRowColor{LightBackground}
`system default-mtu` & Configure the MTU for all interfaces. \tn 
% Row Count 13 (+ 2)
% Row 20
\SetRowColor{white}
`tacacs-server host` & Configure TACACS+ for authorization and accounting. If authorization or accounting is specified, the ACOS device will attempt to use the TACACS+ servers in the order they are configured. If one server fails to respond, the next server will be used. \tn 
% Row Count 26 (+ 13)
% Row 21
\SetRowColor{LightBackground}
`tacacs-server monitor` & Check the status of TACACS+ servers. \tn 
% Row Count 28 (+ 2)
% Row 22
\SetRowColor{white}
`techreport` & Configure automated collection of system information. If you need to contact Technical Support, they may ask you to for the techreports to help diagnose system issues. \tn 
% Row Count 37 (+ 9)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 3 (cont)}}  \tn
% Row 23
\SetRowColor{LightBackground}
`terminal` & Set the terminal configuration. \tn 
% Row Count 2 (+ 2)
% Row 24
\SetRowColor{white}
`tftp blksize` & Change the TFTP block size. \tn 
% Row Count 4 (+ 2)
% Row 25
\SetRowColor{LightBackground}
`timezone` & Configure the time zone on your system. \tn 
% Row Count 6 (+ 2)
% Row 26
\SetRowColor{white}
\seqsplit{`tx-congestion-ctrl`} & Configure looping on the polling driver, on applicable models. \tn 
% Row Count 10 (+ 4)
% Row 27
\SetRowColor{LightBackground}
`upgrade` & Upgrade the system. \tn 
% Row Count 11 (+ 1)
% Row 28
\SetRowColor{white}
`ve-stats` & Enable statistics collection for Virtual Ethernet (VE) interfaces. \tn 
% Row Count 15 (+ 4)
% Row 29
\SetRowColor{LightBackground}
`vlan` & Configure a virtual LAN (VLAN). This command changes the CLI to the configuration level for the VLAN. \tn 
% Row Count 21 (+ 6)
% Row 30
\SetRowColor{white}
`vlan-global \seqsplit{enable-def-vlan-l2-forwarding`} & Enable Layer 2 forwarding on the default VLAN (VLAN 1). \tn 
% Row Count 24 (+ 3)
% Row 31
\SetRowColor{LightBackground}
`vlan-global \seqsplit{l3-vlan-fwd-disable`} & Globally disable Layer 3 forwarding between VLANs. \tn 
% Row Count 27 (+ 3)
% Row 32
\SetRowColor{white}
`vlan-group` & Configure a group of VLANs. \tn 
% Row Count 29 (+ 2)
% Row 33
\SetRowColor{LightBackground}
`vrrp-a` & Enter VRRP-A configuration mode. \tn 
% Row Count 31 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{System Command Reference 3 (cont)}}  \tn
% Row 34
\SetRowColor{LightBackground}
`web-service` & Configure access parameters for the Graphical User Interface (GUI). \tn 
% Row Count 4 (+ 4)
% Row 35
\SetRowColor{white}
`write` & Save the configuration. \tn 
% Row Count 6 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{7.2534 cm} x{10.0166 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{SNMP Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
`\#snmp-server community` & Deprecated command to configure an SNMP community string. \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
`\#snmp-server contact` & Configure SNMP contact information. \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`\#snmp-server enable service` & Enable SNMP service on the ACOS device \tn 
% Row Count 7 (+ 2)
% Row 3
\SetRowColor{white}
`\#snmp-server enable traps` & Enable ACOS to accept SNMP MIB data queries and to send SNMP v1/v2c traps. \tn 
% Row Count 11 (+ 4)
% Row 4
\SetRowColor{LightBackground}
`\#snmp-server engineID` & Set the SNMPv3 engine ID of this ACOS device. \tn 
% Row Count 13 (+ 2)
% Row 5
\SetRowColor{white}
`\#snmp-server group` & Configure an SNMP group. \tn 
% Row Count 15 (+ 2)
% Row 6
\SetRowColor{LightBackground}
`\#snmp-server host` & Configure an SNMP v1/v2c trap receiver. \tn 
% Row Count 17 (+ 2)
% Row 7
\SetRowColor{white}
`\#snmp-server location` & Configure SNMP location information. \tn 
% Row Count 19 (+ 2)
% Row 8
\SetRowColor{LightBackground}
`\#snmp-server SNMPv1-v2c` & Define an SNMPv1 or SNMPv2c community. The members of the community can gain access to the SNMP data available on this device. \tn 
% Row Count 25 (+ 6)
% Row 9
\SetRowColor{white}
`\#snmp-server SNMPv3` & Define an SNMPv3 user. \tn 
% Row Count 27 (+ 2)
% Row 10
\SetRowColor{LightBackground}
`\#snmp-server user` & Deprecated command to configure an SNMPv3 user. \tn 
% Row Count 30 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{7.2534 cm} x{10.0166 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{SNMP Commands (cont)}}  \tn
% Row 11
\SetRowColor{LightBackground}
`\#snmp-server view` & Configure an SNMP view. \tn 
% Row Count 2 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
`show access-list` & Display the configured Access Control Lists (ACLs). The output lists the configuration commands for the ACLs in the running-config. \tn 
% Row Count 7 (+ 7)
% Row 1
\SetRowColor{white}
`show admin` & Display the administrator accounts. \tn 
% Row Count 9 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`show arp` & Display ARP table entries. \tn 
% Row Count 11 (+ 2)
% Row 3
\SetRowColor{white}
`show audit` & Show the command audit log. \tn 
% Row Count 13 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`show axdebug capture` & Display a list of debug files. \tn 
% Row Count 15 (+ 2)
% Row 5
\SetRowColor{white}
`show axdebug config` & Display the debug filter configuration currently applied on ACOS. \tn 
% Row Count 19 (+ 4)
% Row 6
\SetRowColor{LightBackground}
`show axdebug config-file` & Display a list of the debug configuration files. \tn 
% Row Count 22 (+ 3)
% Row 7
\SetRowColor{white}
`Display debug capture files or their contents.` & show axdebug file \tn 
% Row Count 25 (+ 3)
% Row 8
\SetRowColor{LightBackground}
`show axdebug filter` & Display the configured debug output filters. \tn 
% Row Count 28 (+ 3)
% Row 9
\SetRowColor{white}
`show axdebug status` & Display per-CPU packet capture counts for AXdebug. \tn 
% Row Count 31 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands (cont)}}  \tn
% Row 10
\SetRowColor{LightBackground}
`show backup` & Display information about scheduled backups. \tn 
% Row Count 3 (+ 3)
% Row 11
\SetRowColor{white}
`show bfd` & Display information for Bidirectional Forwarding Detection (BFD). \tn 
% Row Count 7 (+ 4)
% Row 12
\SetRowColor{LightBackground}
`show bgp` & Display information for Border Gateway Protocol (BGP). \tn 
% Row Count 10 (+ 3)
% Row 13
\SetRowColor{white}
`show bootimage` & Display the software images stored on the ACOS device. \tn 
% Row Count 13 (+ 3)
% Row 14
\SetRowColor{LightBackground}
`show bridge-vlan-group` & View information for any configured bridge VLAN groups. \tn 
% Row Count 16 (+ 3)
% Row 15
\SetRowColor{white}
`show capture-config` & View capture-config information. \tn 
% Row Count 18 (+ 2)
% Row 16
\SetRowColor{LightBackground}
`show class-list` & Display information for class lists. \tn 
% Row Count 20 (+ 2)
% Row 17
\SetRowColor{white}
`show class-list-group` & Display information for class-list groups. \tn 
% Row Count 23 (+ 3)
% Row 18
\SetRowColor{LightBackground}
`show clns` & Show Connectionless Network Service (CLNS) information. \tn 
% Row Count 26 (+ 3)
% Row 19
\SetRowColor{white}
`show clock` & Display the time, timezone, and date. \tn 
% Row Count 28 (+ 2)
% Row 20
\SetRowColor{LightBackground}
`show context` & View the configuration for the sub-module in which the command is run. \tn 
% Row Count 32 (+ 4)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands (cont)}}  \tn
% Row 21
\SetRowColor{LightBackground}
`show core` & Display core dump statistics. \tn 
% Row Count 2 (+ 2)
% Row 22
\SetRowColor{white}
`show cpu` & Display CPU statistics. \tn 
% Row Count 4 (+ 2)
% Row 23
\SetRowColor{LightBackground}
`show ddos` & Show the DDoS action-list configuration on the device. \tn 
% Row Count 7 (+ 3)
% Row 24
\SetRowColor{white}
`show disk` & Display status information for the device hard disks. \tn 
% Row Count 10 (+ 3)
% Row 25
\SetRowColor{LightBackground}
`show domain-group` & Show domain-group configuration information. \tn 
% Row Count 13 (+ 3)
% Row 26
\SetRowColor{white}
`show domain-list` & Show domain-list configuration information. \tn 
% Row Count 16 (+ 3)
% Row 27
\SetRowColor{LightBackground}
`show dumpthread` & Show status information about the system threads. \tn 
% Row Count 19 (+ 3)
% Row 28
\SetRowColor{white}
`show environment` & Display temperature, fan, and power supply status. \tn 
% Row Count 22 (+ 3)
% Row 29
\SetRowColor{LightBackground}
`show errors` & Show error information for the system. This command provides a way to quickly view system status and error statistics. \tn 
% Row Count 28 (+ 6)
% Row 30
\SetRowColor{white}
`show fail-safe` & Display fail-safe information. \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands (cont)}}  \tn
% Row 31
\SetRowColor{LightBackground}
`show glid` & View the configuration for global IP limiting rules. \tn 
% Row Count 3 (+ 3)
% Row 32
\SetRowColor{white}
`show hardware` & Displays hardware information for the ACOS device. \tn 
% Row Count 6 (+ 3)
% Row 33
\SetRowColor{LightBackground}
`show history` & Show the CLI command history for the current session. \tn 
% Row Count 9 (+ 3)
% Row 34
\SetRowColor{white}
`show interfaces` & Display interface configuration and status information. \tn 
% Row Count 12 (+ 3)
% Row 35
\SetRowColor{LightBackground}
`show interfaces media` & Display information about 1-Gbps and 10-Gbps small form-factor pluggable (SFP+) interfaces. \tn 
% Row Count 17 (+ 5)
% Row 36
\SetRowColor{white}
`show interfaces statistics` & Display interface statistics. \tn 
% Row Count 19 (+ 2)
% Row 37
\SetRowColor{LightBackground}
`show ip` & Show the IP mode in which the ACOS device is running, gateway or transparent mode. \tn 
% Row Count 24 (+ 5)
% Row 38
\SetRowColor{white}
`show ip bgp` & Show IPv4 BGP information. \tn 
% Row Count 26 (+ 2)
% Row 39
\SetRowColor{LightBackground}
`show ip dns` & Display the DNS configuration. \tn 
% Row Count 28 (+ 2)
% Row 40
\SetRowColor{white}
`show ip fib`  \{\{nl\}\} `show ipv6 fib` & Display Forwarding Information Base (FIB) entries. \tn 
% Row Count 31 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands (cont)}}  \tn
% Row 41
\SetRowColor{LightBackground}
`show ip fragmentation statistics`  \{\{nl\}\} `show ipv6 fragmentation statistics` & Show statistics for IP fragmentation. \tn 
% Row Count 4 (+ 4)
% Row 42
\SetRowColor{white}
`show ip helper-address` & Display DHCP relay information. \tn 
% Row Count 6 (+ 2)
% Row 43
\SetRowColor{LightBackground}
`show ip interfaces`  \{\{nl\}\} `show ipv6 interfaces` & Display IP interface information. \tn 
% Row Count 9 (+ 3)
% Row 44
\SetRowColor{white}
`show ip isis`  \{\{nl\}\} `show ipv6 isis` & Display the IS-IS routing table. \tn 
% Row Count 11 (+ 2)
% Row 45
\SetRowColor{LightBackground}
`show ip map-list` & Show IP map list information. \tn 
% Row Count 13 (+ 2)
% Row 46
\SetRowColor{white}
`show ip nat`  \{\{nl\}\} `show ipv6 nat` & Display NAT information. \tn 
% Row Count 15 (+ 2)
% Row 47
\SetRowColor{LightBackground}
`show ip ospf`  \{\{nl\}\} `show ipv6 ospf` & Display OSPF status information. \tn 
% Row Count 17 (+ 2)
% Row 48
\SetRowColor{white}
`show ip prefix-list`  \{\{nl\}\} `show ipv6 prefix-list` & Show information about configured IP prefix lists. \tn 
% Row Count 20 (+ 3)
% Row 49
\SetRowColor{LightBackground}
`show ip protocols`  \{\{nl\}\} `show ipv6 protocols` & Show information for dynamic routing protocols. \tn 
% Row Count 23 (+ 3)
% Row 50
\SetRowColor{white}
`show ip route`  \{\{nl\}\} `show ipv6 route` & Display the IPv4 or IPv6 routing table. \tn 
% Row Count 26 (+ 3)
% Row 51
\SetRowColor{LightBackground}
`show ipmi` & Show information for the Intelligent Platform Management Interface (IPMI) on the ACOS device. \tn 
% Row Count 31 (+ 5)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands (cont)}}  \tn
% Row 52
\SetRowColor{LightBackground}
`show ipv6 ndisc` & Display information for IPv6 router discovery. \tn 
% Row Count 3 (+ 3)
% Row 53
\SetRowColor{white}
`show ipv6 neighbor` & Display information about neighboring IPv6 devices. \tn 
% Row Count 6 (+ 3)
% Row 54
\SetRowColor{LightBackground}
`show ipv6 stats` & Show IPv6 statistics. \tn 
% Row Count 8 (+ 2)
% Row 55
\SetRowColor{white}
`show ipv6 traffic` & Display IPv6 traffic statistics. \tn 
% Row Count 10 (+ 2)
% Row 56
\SetRowColor{LightBackground}
`show isis` & Display information for Intermediate System to Intermediate System (IS-IS). \tn 
% Row Count 14 (+ 4)
% Row 57
\SetRowColor{white}
`show json-config` & View the JSON/aXAPI data format associated with the running-config, or for a specific object. \tn 
% Row Count 19 (+ 5)
% Row 58
\SetRowColor{LightBackground}
`show json-config-detail` & View detailed JSON/aXAPI data format associated with the running-config, or for a specific object.The output is similar to the output for `show json-config` with the addition of the `a10-url` and `obj-type` fields. \tn 
% Row Count 30 (+ 11)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands (cont)}}  \tn
% Row 59
\SetRowColor{LightBackground}
`show \seqsplit{json-config-with-default`} & View JSON/aXAPI data format associated with the running-config, or for a specific object. The output is similar to the output for `show json-config-detail` with the addition of default values for objects not explicitly configured. \tn 
% Row Count 12 (+ 12)
% Row 60
\SetRowColor{white}
`show key-chain` & Show configuration information for an authentication key chain. \tn 
% Row Count 16 (+ 4)
% Row 61
\SetRowColor{LightBackground}
`show lacp` & Show configuration information and statistics for Link Aggregation Control Protocol (LACP). \tn 
% Row Count 21 (+ 5)
% Row 62
\SetRowColor{white}
`show lacp-passthrough` & Show LACP passthrough configuration. \tn 
% Row Count 23 (+ 2)
% Row 63
\SetRowColor{LightBackground}
`show license` & Display the host ID and, if applicable, serial number of the license applied to this ACOS device. \tn 
% Row Count 28 (+ 5)
% Row 64
\SetRowColor{white}
`show lldp neighbors` & Displays information on all remote neighbors or on the specified interface. \tn 
% Row Count 32 (+ 4)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands (cont)}}  \tn
% Row 65
\SetRowColor{LightBackground}
`show lldp statistics` & Displays LLDP receive or send error statistics, You can display information on all interfaces or only display information on a specified interface. \tn 
% Row Count 8 (+ 8)
% Row 66
\SetRowColor{white}
`show locale` & Display the configured CLI locale. \tn 
% Row Count 10 (+ 2)
% Row 67
\SetRowColor{LightBackground}
`show log` & Display entries in the syslog buffer or display current log settings (policy). Log entries are listed starting with the most recent entry on top. \tn 
% Row Count 18 (+ 8)
% Row 68
\SetRowColor{white}
`show mac-address-table` & Display MAC table entries. \tn 
% Row Count 20 (+ 2)
% Row 69
\SetRowColor{LightBackground}
`show management` & Show the types of management access allowed on each of the device's Ethernet interfaces. \tn 
% Row Count 25 (+ 5)
% Row 70
\SetRowColor{white}
`show memory` & Display memory usage information. \tn 
% Row Count 27 (+ 2)
% Row 71
\SetRowColor{LightBackground}
`show mirror` & Display port mirroring information. \tn 
% Row Count 29 (+ 2)
% Row 72
\SetRowColor{white}
`show monitor` & Display the event thresholds for system resources. \tn 
% Row Count 32 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands (cont)}}  \tn
% Row 73
\SetRowColor{LightBackground}
`show netflow` & Display NetFlow information. \tn 
% Row Count 2 (+ 2)
% Row 74
\SetRowColor{white}
`show ntp` & Show the Network Time Protocol (NTP) servers and status. \tn 
% Row Count 5 (+ 3)
% Row 75
\SetRowColor{LightBackground}
`show overlay-tunnel` & Shows statistics of overlay tunnels on the ACOS device. \tn 
% Row Count 8 (+ 3)
% Row 76
\SetRowColor{white}
`show pki` & Shows information about the certificates on the ACOS device. \tn 
% Row Count 11 (+ 3)
% Row 77
\SetRowColor{LightBackground}
`show poap` & View the POAP status of your system. \tn 
% Row Count 13 (+ 2)
% Row 78
\SetRowColor{white}
`show process system` & Display the status of system processes. \tn 
% Row Count 15 (+ 2)
% Row 79
\SetRowColor{LightBackground}
`show radius-server` & Display RADIUS statistics. \tn 
% Row Count 17 (+ 2)
% Row 80
\SetRowColor{white}
`show reboot` & Display scheduled system reboots. \tn 
% Row Count 19 (+ 2)
% Row 81
\SetRowColor{LightBackground}
`show route-map` & Show the configured route maps. \tn 
% Row Count 21 (+ 2)
% Row 82
\SetRowColor{white}
`show router log file` & Show router logs. \tn 
% Row Count 23 (+ 2)
% Row 83
\SetRowColor{LightBackground}
`show running-config` & Display the running-config. \tn 
% Row Count 25 (+ 2)
% Row 84
\SetRowColor{white}
`show session` & Display session information. \tn 
% Row Count 27 (+ 2)
% Row 85
\SetRowColor{LightBackground}
`show sflow` & Show sFlow information. \tn 
% Row Count 29 (+ 2)
% Row 86
\SetRowColor{white}
`show shutdown` & Display scheduled system shutdowns. \tn 
% Row Count 31 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands (cont)}}  \tn
% Row 87
\SetRowColor{LightBackground}
`show snmp` & Display SNMP OIDs for the specified objects. \tn 
% Row Count 3 (+ 3)
% Row 88
\SetRowColor{white}
`show snmp stats` & Display SNMP statistics. \tn 
% Row Count 5 (+ 2)
% Row 89
\SetRowColor{LightBackground}
`show startup-config` & Display a configuration profile or display a list of all the locally saved configuration profiles. \tn 
% Row Count 10 (+ 5)
% Row 90
\SetRowColor{white}
`show statistics` & Display packet statistics for interfaces. \tn 
% Row Count 13 (+ 3)
% Row 91
\SetRowColor{LightBackground}
`show store` & Display the configured file transfer profiles in the credential store. The credential store is a saved set of access information for file transfer between the ACOS device and remote file servers. \tn 
% Row Count 23 (+ 10)
% Row 92
\SetRowColor{white}
`show system cpu-load-sharing` & Displays CPU load sharing information. \tn 
% Row Count 25 (+ 2)
% Row 93
\SetRowColor{LightBackground}
`show system platform` & Display platform-related information and statistics. \tn 
% Row Count 28 (+ 3)
% Row 94
\SetRowColor{white}
`show system resource-usage` & Display Layer 4 session capacity information. \tn 
% Row Count 31 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{8.635 cm} x{8.635 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Show Commands (cont)}}  \tn
% Row 95
\SetRowColor{LightBackground}
`show tacacs-server` & Display TACACS statistics. \tn 
% Row Count 2 (+ 2)
% Row 96
\SetRowColor{white}
`show techsupport` & Display or export system information for use when troubleshooting. \tn 
% Row Count 6 (+ 4)
% Row 97
\SetRowColor{LightBackground}
`show terminal` & Show the terminal settings. \tn 
% Row Count 8 (+ 2)
% Row 98
\SetRowColor{white}
`show tftp` & Display the currently configured TFTP block size. \tn 
% Row Count 11 (+ 3)
% Row 99
\SetRowColor{LightBackground}
`show trunk` & Show information about the trunks configured on the system. \tn 
% Row Count 14 (+ 3)
% Row 100
\SetRowColor{white}
`show version` & Display software, hardware, and firmware version information. \tn 
% Row Count 18 (+ 4)
% Row 101
\SetRowColor{LightBackground}
`show vlans` & Display the configured VLANs. \tn 
% Row Count 20 (+ 2)
% Row 102
\SetRowColor{white}
`show vrrp-a` & Display VRRP-A information. \tn 
% Row Count 22 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{5.181 cm} x{12.089 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{AX Debug Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
\seqsplit{`apply-config`} & Apply an AXdebug configuration file. \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`capture` & Start capturing packets. \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
`count` & Specify the maximum number of packets to capture. \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
`delete` & Delete an axdebug capture file. \tn 
% Row Count 7 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\seqsplit{`filter-config`} & Configure an AX debug filter, to specify the types of packets to capture. \tn 
% Row Count 10 (+ 3)
% Row 5
\SetRowColor{white}
`incoming` & Specify the Ethernet interfaces and traffic direction for which to capture packets. \tn 
% Row Count 13 (+ 3)
% Row 6
\SetRowColor{LightBackground}
`length` & Specify the maximum length of packets to capture. Packets that are longer are not captured. \tn 
% Row Count 17 (+ 4)
% Row 7
\SetRowColor{white}
`maxfile` & Specify the maximum number of axdebug packet capture files to keep. \tn 
% Row Count 20 (+ 3)
% Row 8
\SetRowColor{LightBackground}
`outgoing` & Limits the packet capture to outbound packets on Ethernet interface "x". \tn 
% Row Count 23 (+ 3)
% Row 9
\SetRowColor{white}
\seqsplit{`save-config`} & Save your AXdebug configuration to a file. \tn 
% Row Count 25 (+ 2)
% Row 10
\SetRowColor{LightBackground}
\seqsplit{`sess-filter-dis`} & Disable the session-based filter. \tn 
% Row Count 27 (+ 2)
% Row 11
\SetRowColor{white}
`tcpdump` & Capture packets for analysis. \tn 
% Row Count 29 (+ 2)
% Row 12
\SetRowColor{LightBackground}
`timeout` & Specify the maximum number of minutes to capture packets. \tn 
% Row Count 32 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}



\end{document}