\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{mihdoc16}
\pdfinfo{
  /Title (wlan-controller.pdf)
  /Creator (Cheatography)
  /Author (mihdoc16)
  /Subject (WLAN\_Controller Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{11CBD1}
\definecolor{LightBackground}{HTML}{F0FBFC}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{WLAN\_Controller Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{mihdoc16} via \textcolor{DarkBackground}{\uline{cheatography.com/96249/cs/22083/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}mihdoc16 \\
  \uline{cheatography.com/mihdoc16} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 18th March, 2020.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{3}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Configure a WLAN}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 1:}} Log into the WLAN-Controller by surfing it's IP address and entering the login credentials} \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 2:}} Create a new WLAN by going into the WLAN tab and clicking {\bf{NEW}}} \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 3:}} To enable the WLAN, edit the newly created WLAN and check the {\bf{ENABLED}} Box} \tn 
% Row Count 7 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Configure RADIUS}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 1:}} Under the {\bf{Security}} tab open the {\bf{RADIUS}} dropdown and click on {\bf{Authentication}}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 2:}} Now enter the IP of the {\bf{RADIUS Server}} and a {\bf{Shared secret key}}} \tn 
% Row Count 4 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Configure a WPA2 Enterprise WLAN}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 1:}} In the WLAN edit page you can select an {\bf{Interface}}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 2:}} WLAN edit page -{}-\textgreater{} {\bf{Security tab}} -{}-\textgreater{} enable {\bf{AES}} and {\bf{802.1X}}} \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 2}}: WLAN edit page -{}-\textgreater{} {\bf{Security tab}} -{}-\textgreater{} {\bf{AAA Server}}* -{}-\textgreater{} you can select a RADIUS server} \tn 
% Row Count 7 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Definitions}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{SNMP:}} Simple Network Management Protocol, allows to monitor the network with log messages (traps)} \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{RADIUS:}} Remote Authentication Dial-In User Service, allows to authorize users going into the network} \tn 
% Row Count 6 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Configure a new Interface}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 1:}} {\bf{Controller}} tab -{}-\textgreater{} {\bf{Interface}} -{}-\textgreater{} {\bf{new}}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 2:}} It now allows you to enter an {\bf{Interface name}} and a {\bf{VLAN ID}}} \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 3:}} On the edit page the most important parts are the {\bf{physical port}} and the {\bf{Interface address}} and the {\bf{DHCP Server}}} \tn 
% Row Count 7 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Configure SNMP}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 1:}} Under the {\bf{Management}} tab click on {\bf{TRAP Receivers}} and click on {\bf{NEW}}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 2:}} Now enter a name and the IP address of the {\bf{SNMP Server}}} \tn 
% Row Count 4 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Configure a DHCP Scope}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 1:}} {\bf{Controller}} tab -{}-\textgreater{} {\bf{Internal DHCP Server}} dropdown -{}-\textgreater{} {\bf{DHCP Scope}}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{STEP 2:}} In the edit page, it allows to configure the {\bf{Pool}}, {\bf{network}}, {\bf{default routers}} and the {\bf{Status}}} \tn 
% Row Count 5 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}