\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{MemeV2}
\pdfinfo{
  /Title (packet-tracer.pdf)
  /Creator (Cheatography)
  /Author (MemeV2)
  /Subject (Packet Tracer Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{A3A3A3}
\definecolor{LightBackground}{HTML}{F3F3F3}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Packet Tracer Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{MemeV2} via \textcolor{DarkBackground}{\uline{cheatography.com/76332/cs/18843/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}MemeV2 \\
  \uline{cheatography.com/memev2} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 15th February, 2019.\\
   Updated 15th February, 2019.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.


\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Mode}}  \tn
\SetRowColor{LightBackground}
\mymulticolumn{1}{p{17.67cm}}{\vspace{1px}\centerline{\includegraphics[width=5.1cm]{/web/www.cheatography.com/public/uploads/memev2_1550254096_Modes.PNG}}} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{7.9442 cm} x{9.3258 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Mode}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Mode}} & {\bf{Utilisation}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
User {\bf{\textgreater{}}} & Permet des commandes Show \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
Enable {\bf{\#}} & User privilégié \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
Configure terminal ({\bf{conf t}}) & Modification GLOBAL sur l'équipement \tn 
% Row Count 6 (+ 2)
% Row 4
\SetRowColor{LightBackground}
Interface & Modification sur interface \tn 
% Row Count 8 (+ 2)
% Row 5
\SetRowColor{white}
Vlan & Modification sur VLAN \tn 
% Row Count 9 (+ 1)
% Row 6
\SetRowColor{LightBackground}
Line Console 0 & Modification sur port Console \tn 
% Row Count 11 (+ 2)
% Row 7
\SetRowColor{white}
Line VTY 0 15 & Modification sur port distant \tn 
% Row Count 13 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{6.3899 cm} x{10.8801 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{"Show" commande (mode enable)}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Commande}} & {\bf{Information affichée}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
show mac address-table & Table d'adresse MAC \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
show ip route & Table de routage \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
show interface gig0/0 & status, MAC, IP, etc. pour Gigabit Ethernet 0/0 \tn 
% Row Count 6 (+ 2)
% Row 4
\SetRowColor{LightBackground}
show ip interface brief & nom, IP, status, etc. pour toutes les interfaces \tn 
% Row Count 8 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{6.0732 cm} x{3.374 cm} x{7.4228 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{17.67cm}}{\bf\textcolor{white}{Switch}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Description}} & {\bf{Depuis le mode}} & {\bf{Commande}} \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
Modifier le nom du switch & Conf t & {\bf{hostname}} {\emph{nom voulu}} \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
Créer un VLAN & Conf t & {\bf{vlan}} {\emph{id du vlan}} \tn 
% Row Count 7 (+ 2)
% Row 3
\SetRowColor{white}
Modifier le nom d'un VLAN & Vlan {\emph{id}} & {\bf{name}} {\emph{nom voulu}} \tn 
% Row Count 9 (+ 2)
% Row 4
\SetRowColor{LightBackground}
Modifier une interface & Conf t & {\bf{interface}} {\emph{nom interface}} \tn 
% Row Count 11 (+ 2)
% Row 5
\SetRowColor{white}
Affecter un VLAN à une interface & \seqsplit{Interface} & {\bf{switchport mode}} {\emph{access}} \{\{nl\}\} {\bf{switchport access vlan}} {\emph{id vlan1,id vlan2...}} \tn 
% Row Count 16 (+ 5)
% Row 6
\SetRowColor{LightBackground}
Passer un lien en mode Trunk & \seqsplit{Interface} & {\bf{switchport mode}} {\emph{trunk}} \{\{nl\}\} {\bf{switchport trunk allowed vlan}} {\emph{id vlan1,id vlan2,...}} \tn 
% Row Count 22 (+ 6)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{6.9167 cm} x{3.0366 cm} x{6.9167 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{17.67cm}}{\bf\textcolor{white}{Routeur}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Description}} & {\bf{Depuis le mode}} & {\bf{Commande}} \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
Modifer le nom du routeur & Conf t & {\bf{hostname}} {\emph{nom voulu}} \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
Ajout d'une route & Conf t & {\bf{ip route}} {\emph{ip réseau destination  masque  passerelle}} \tn 
% Row Count 9 (+ 4)
% Row 3
\SetRowColor{white}
Modifier une interface & Conf t & {\bf{Interface}} {\emph{nom de l'interface}} \tn 
% Row Count 12 (+ 3)
% Row 4
\SetRowColor{LightBackground}
Ajout d'une adresse IP & \seqsplit{Interface} & {\bf{ip address}} {\emph{ip masque}} \tn 
% Row Count 14 (+ 2)
% Row 5
\SetRowColor{white}
Encapsulation 802.1Q & \seqsplit{Interface} & {\bf{trunk encapsulation dot1q}} {\emph{id vlan}} \tn 
% Row Count 17 (+ 3)
% Row 6
\SetRowColor{LightBackground}
Indiquer l'ip du DHCP \{\{nl\}\} A faire sur les passerelles & \seqsplit{Interface} & {\bf{ip helper-address}} {\emph{ip du dhcp}} \tn 
% Row Count 21 (+ 4)
% Row 7
\SetRowColor{white}
Allumer un port & \seqsplit{Interface} & {\bf{no shutdown}} \tn 
% Row Count 23 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{4.8923 cm} x{4.7236 cm} x{7.2541 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{17.67cm}}{\bf\textcolor{white}{Telnet}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Description}} & {\bf{Depuis le mode}} & {\bf{Commande}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
Activer le Telnet & line vty 0 15 & {\bf{transport input}} {\emph{telnet}} \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
Mot de passe User & line vty 0 15 & {\bf{password}} {\emph{mdp}} \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
Mot de passe Enable & Conf t & {\bf{enable secret}} {\emph{mdp}} \tn 
% Row Count 8 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{4.3862 cm} x{5.5671 cm} x{6.9167 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{17.67cm}}{\bf\textcolor{white}{SSH}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Description}} & \{\{nobreak\}\}{\bf{Depuis le mode}} & {\bf{Commande}} \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
Création clef cryptage & Conf t & {\bf{crypto key generate rsa}} \tn 
% Row Count 6 (+ 3)
% Row 2
\SetRowColor{LightBackground}
Activer le SSH & Conf t & {\bf{ip ssh version 2}} \tn 
% Row Count 8 (+ 2)
% Row 3
\SetRowColor{white}
Activer le SSH & line vty 0 15 & {\bf{transport input ssh}} \tn 
% Row Count 10 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\seqsplit{Activation} du login & line vty 0 15 & {\bf{login local}} \tn 
% Row Count 12 (+ 2)
% Row 5
\SetRowColor{white}
Création compte admin & Conf t & {\bf{username}} {\emph{admin}} {\bf{secret}} {\emph{mdp}} \tn 
% Row Count 15 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\SetRowColor{LightBackground}
\mymulticolumn{3}{x{17.67cm}}{Pour {\bf{prendre la main}} sur le switch ou routeur en {\bf{Telnet}} ou {\bf{SSH}}, il faudra d'abord {\bf{ajouter une IP sur l'interface VLAN 1}} (vlan natif) du routeur/switch pour pouvoir y accéder à distance. \newline  \newline Faire la commande sur le switch ou routeur : \newline {\bf{Interface vlan1}} \newline {\bf{ip address}} {\emph{ip et masque voulu pour se connecter au switch ou routeur}}}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{6.4106 cm} x{4.2175 cm} x{6.2419 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{17.67cm}}{\bf\textcolor{white}{Protocole RIP (Routing Information Protocol)}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Description}} & {\bf{Depuis le mode}} & {\bf{Commande}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
mode RIP & Conf t & {\bf{router rip}} \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
Utilisation de RIP version 2 & RIP & {\bf{version 2}} \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
Désactiver l'agrégation & RIP & {\bf{no auto-summary}} \tn 
% Row Count 7 (+ 2)
% Row 4
\SetRowColor{LightBackground}
Déclaration d'un réseau & RIP & {\bf{network}} {\emph{ip du réseau}} \tn 
% Row Count 9 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\SetRowColor{LightBackground}
\mymulticolumn{3}{x{17.67cm}}{Le protocole RIP permet d'éffectuer un routage automatique. \newline Il faudra le mettre en place sur tous les routeurs du réseau pour qu'ils \newline puissent se transmettre leurs routes \newline  \newline Lors de la déclaration des réseau (Commande {\bf{network}} {\emph{ip du réseau}}), \newline il faudra reéffectuer cette commande pour chacun des réseaux directement \newline connectés au routeur.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}



\end{document}