\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{megon}
\pdfinfo{
  /Title (routing-fundamentals.pdf)
  /Creator (Cheatography)
  /Author (megon)
  /Subject (Routing Fundamentals Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{D87093}
\definecolor{LightBackground}{HTML}{FCF6F8}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Routing Fundamentals Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{megon} via \textcolor{DarkBackground}{\uline{cheatography.com/193529/cs/40275/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}megon \\
  \uline{cheatography.com/megon} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 26th September, 2023.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{x{2.48 cm} x{5.52 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Factory Reset}}  \tn
% Row 0
\SetRowColor{LightBackground}
R\# sh run & {\bf{Check}}: hostname, interface, ip, duplex \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
R\# write erase & {[}confirm{]} \{\{fa-level-up\}\} \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
R\# reload & Continue with configuration dialog?: {\bf{no}} \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
{\bf{Check results}}: & `\# sh run` and `\# show start` \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Configuration}}} \tn 
% Row Count 9 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R\# config t} \tn 
% Row Count 10 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config)\# hostname {[}name{]}} \tn 
% Row Count 11 (+ 1)
% Row 7
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config)\# interface GigabitEthernet{\bf{{[}0/0{]}}}} \tn 
% Row Count 12 (+ 1)
% Row 8
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config-if)\# ip address {[}IP{]} {[}mask{]}} \tn 
% Row Count 13 (+ 1)
% Row 9
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config-if)\# duplex auto} \tn 
% Row Count 14 (+ 1)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config-if)\# speed auto} \tn 
% Row Count 15 (+ 1)
% Row 11
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config-if)\# no shutdown} \tn 
% Row Count 16 (+ 1)
% Row 12
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config-if)\#line con 0} \tn 
% Row Count 17 (+ 1)
% Row 13
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config-line)\# exec-timeout 30 0} \tn 
% Row Count 18 (+ 1)
% Row 14
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config-line)\#end} \tn 
% Row Count 19 (+ 1)
% Row 15
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R\# copy run start} \tn 
% Row Count 20 (+ 1)
% Row 16
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 20 (+ 0)
% Row 17
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R\# sh ip route} \tn 
% Row Count 21 (+ 1)
% Row 18
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R\# show run | section interface} \tn 
% Row Count 22 (+ 1)
% Row 19
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 22 (+ 0)
% Row 20
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Disable interface FastEthernet 0/0 }}} \tn 
% Row Count 23 (+ 1)
% Row 21
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config)\# interface fastEthernet 0/0} \tn 
% Row Count 24 (+ 1)
% Row 22
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config-if)\# shutdown} \tn 
% Row Count 25 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Configure IP addresses on Router}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{R\#config t} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{R(config)\# int f0/0} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{R(config-if)\# ip address {[}IP{]} {[}mask{]}} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{R(config-if)\# no shut} \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{{\bf{Verify routes have been added}}} \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{R\# show ip route} \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{{\bf{Verify the traffic path from PC to PC}}:} \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{`C:\textbackslash{}\textgreater{}ping {[}IP{]}` and  `C:\textbackslash{}\textgreater{}tracert {[}IP{]}`} \tn 
% Row Count 8 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{Switch ports are not shutdown by default.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Static Routes}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{R\# config t} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{R(config)\# ip route {[}Destination IP subnet{]} {[}Destination IP subnet mask{]} {[}next-hop IP{]}} \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{{\bf{Verify connectivity by ping}}} \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{{\bf{Verify the traffic path from PC to PC}}:} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{`C:\textbackslash{}\textgreater{}ping {[}IP{]}` and  `C:\textbackslash{}\textgreater{}tracert {[}IP{]}`} \tn 
% Row Count 6 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{} \tn 
% Row Count 6 (+ 0)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{{\bf{Remove static routes}}} \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{R\# config t} \tn 
% Row Count 8 (+ 1)
% Row 8
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{R(config)\# no ip route {[}Dest IP subnet{]} {[}Dest IP subnet mask{]} {[}next-hop IP{]}} \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Summary Routes}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{R\# config t} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{R(config)\# ip route {[}IP subnet{]} {[}mask subnet{]} {[}next hop IP{]}} \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{R(config)\# end} \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{R\# sh ip route} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{{\bf{Verify connectivity by ping}}} \tn 
% Row Count 6 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Default Route and Load Balancing}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{R\# config t} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{R(config)\# int f0/0} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{R(config-if)\# ip add {[}IP{]} {[}mask{]}} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{R(config-if)\# no shut} \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{{\bf{Ensure that each router has a route out to the internet}}} \tn 
% Row Count 6 (+ 2)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{R(config)\# ip route 0.0.0.0  0.0.0.0  {[}next hop IP{]}} \tn 
% Row Count 8 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.44 cm} x{4.56 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Routing Protocol}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Basic RIPv1 configuration + Enable RIPv2}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config)\# router rip} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{R(config-router)\#} version 2 & {\emph{Enable RIPv2}} \tn 
% Row Count 4 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config-router)\# no auto-summary} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config-router)\# network {[}ip subnet{]}} \tn 
% Row Count 6 (+ 1)
% Row 5
\SetRowColor{white}
R\# show ip route & {\emph{Check that RIP routes have been added}} \tn 
% Row Count 8 (+ 2)
% Row 6
\SetRowColor{LightBackground}
R\#sh ip rip database & {\emph{View the RIP database}} \tn 
% Row Count 10 (+ 2)
% Row 7
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 10 (+ 0)
% Row 8
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Inject the default static route}}} \tn 
% Row Count 11 (+ 1)
% Row 9
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config)\# router rip} \tn 
% Row Count 12 (+ 1)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config-router)\# default-information originate} \tn 
% Row Count 13 (+ 1)
% Row 11
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 13 (+ 0)
% Row 12
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Debug the routing protocol updates}}} \tn 
% Row Count 14 (+ 1)
% Row 13
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R\# debug ip rip} \tn 
% Row Count 15 (+ 1)
% Row 14
\SetRowColor{LightBackground}
R\# undebug all & {\emph{Turn off all debugging}} \tn 
% Row Count 17 (+ 2)
% Row 15
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 17 (+ 0)
% Row 16
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Basic EIGRP configuration}}} \tn 
% Row Count 18 (+ 1)
% Row 17
\SetRowColor{white}
R(config)\# router eigrp 100 & // R(config-router)\# network {[}IP subnet{]} \tn 
% Row Count 20 (+ 2)
% Row 18
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config-router)\# no auto-summary} \tn 
% Row Count 21 (+ 1)
% Row 19
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config-router)\# network {[}IP{]} {[}mask{]}} \tn 
% Row Count 22 (+ 1)
% Row 20
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 22 (+ 0)
% Row 21
\SetRowColor{white}
R(config)\# no router eigrp 100 & {\emph{remove/ disable EIGRP}} \tn 
% Row Count 24 (+ 2)
% Row 22
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 24 (+ 0)
% Row 23
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R\# sh ip eigrp neighbors} \tn 
% Row Count 25 (+ 1)
% Row 24
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 25 (+ 0)
% Row 25
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Loopback configuration}}} \tn 
% Row Count 26 (+ 1)
% Row 26
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config)\#interface loopback0} \tn 
% Row Count 27 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.44 cm} x{4.56 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Adjacencies and Passive Interfaces}}  \tn
% Row 0
\SetRowColor{LightBackground}
R\# show ip eigrp neighbors & {\emph{Verify that R"x" has established EIGRP adjacencies with R"y"}} \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 3 (+ 0)
% Row 2
\SetRowColor{LightBackground}
R(config-if)\# router eigrp 100 & {\emph{Configure the loopback interface and the link as passive interfaces}} \tn 
% Row Count 7 (+ 4)
% Row 3
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config-router)\# passive-interface loopback0} \tn 
% Row Count 8 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config-router)\# passive-interface fastethernet1/1} \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Basic OSPF configuration}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config)\# router ospf 1} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
R(config-router)\# network {[}IP subnet{]} {[}wildcard mask{]} area 0 & {\emph{Ex: network 10.0.0.0 0.255.255.255 area 0}} \tn 
% Row Count 4 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 4 (+ 0)
% Row 3
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{{\bf{OSPF Verification}}} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
R\# sh run | section ospf & {\emph{show run | section ospf}} \tn 
% Row Count 7 (+ 2)
% Row 5
\SetRowColor{white}
R\# sh ip protocols & {\emph{show ip protocols}} \tn 
% Row Count 8 (+ 1)
% Row 6
\SetRowColor{LightBackground}
R\# show ip ospf interface brief & {\emph{show ip ospf interface brief}} \tn 
% Row Count 10 (+ 2)
% Row 7
\SetRowColor{white}
R\# show ip ospf neighbor & {\emph{show ip ospf neighbor}} \tn 
% Row Count 12 (+ 2)
% Row 8
\SetRowColor{LightBackground}
R\# show ip ospf database & {\emph{show ip ospf database}} \tn 
% Row Count 14 (+ 2)
% Row 9
\SetRowColor{white}
R\# show ip route & {\emph{show ip route}} \tn 
% Row Count 15 (+ 1)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 15 (+ 0)
% Row 11
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Remove/ Disable OSPF}}} \tn 
% Row Count 16 (+ 1)
% Row 12
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config)\# no router ospf 1} \tn 
% Row Count 17 (+ 1)
% Row 13
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 17 (+ 0)
% Row 14
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{OSPF Router ID}}} \tn 
% Row Count 18 (+ 1)
% Row 15
\SetRowColor{white}
R\# sh ip int brief & {\emph{Check Loopback or No Loopback}} \tn 
% Row Count 20 (+ 2)
% Row 16
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R\# show ip protocols} \tn 
% Row Count 21 (+ 1)
% Row 17
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 21 (+ 0)
% Row 18
\SetRowColor{LightBackground}
R(config-router)\# router ospf 1 & {\emph{Manually Configured}} \tn 
% Row Count 23 (+ 2)
% Row 19
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R\#(config-router)\# router-id 2.2.2.2} \tn 
% Row Count 24 (+ 1)
% Row 20
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R\# clear ip ospf process} \tn 
% Row Count 25 (+ 1)
% Row 21
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R\# show ip protocols} \tn 
% Row Count 26 (+ 1)
% Row 22
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 26 (+ 0)
% Row 23
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Passive Interface Configuration}}} \tn 
% Row Count 27 (+ 1)
% Row 24
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R1(config-router)\# router ospf 1} \tn 
% Row Count 28 (+ 1)
% Row 25
\SetRowColor{white}
\seqsplit{R1\#(config-router)\#} passive-interface {[}loopback 0{]} & {\emph{ex2: \seqsplit{R\#(config-router)\#} passive-interface f2/0}} \tn 
% Row Count 31 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Basic OSPF configuration (cont)}}  \tn
% Row 26
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 0 (+ 0)
% Row 27
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R1(config-router)\# router ospf 1} \tn 
% Row Count 1 (+ 1)
% Row 28
\SetRowColor{LightBackground}
\seqsplit{R1\#(config-router)\#} passive-interface default & {\emph{set passive interface as the default}} \tn 
% Row Count 4 (+ 3)
% Row 29
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R1\#(config-router)\# no passive-interface {[}f0/0{]}} \tn 
% Row Count 5 (+ 1)
% Row 30
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 5 (+ 0)
% Row 31
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Default Route Injection}}} \tn 
% Row Count 6 (+ 1)
% Row 32
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R4(config)\#ip route 0.0.0.0 0.0.0.0 203.0.113.2} \tn 
% Row Count 7 (+ 1)
% Row 33
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R4(config)\#router ospf 1} \tn 
% Row Count 8 (+ 1)
% Row 34
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{\seqsplit{R4(config-router)\#default-information} originate} \tn 
% Row Count 9 (+ 1)
% Row 35
\SetRowColor{white}
-{}-{}-\textgreater{} R1\#sh ip route & {\emph{Default Route Injection Verification}} \tn 
% Row Count 11 (+ 2)
% Row 36
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 11 (+ 0)
% Row 37
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{{\bf{OSPD Areas}}} \tn 
% Row Count 12 (+ 1)
% Row 38
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{R(config)\# router ospf 1} \tn 
% Row Count 13 (+ 1)
% Row 39
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{R(config-router)\# network {[}IP subnet{]} {[}wildcard mask{]} area 0} \tn 
% Row Count 15 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}