\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{Matthias Bergmann (matttias)}
\pdfinfo{
  /Title (vlan-vtp-dtp-etherchannel.pdf)
  /Creator (Cheatography)
  /Author (Matthias Bergmann (matttias))
  /Subject (VLAN, VTP, DTP, Etherchannel Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{2EA36C}
\definecolor{LightBackground}{HTML}{F1F9F5}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{VLAN, VTP, DTP, Etherchannel Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{Matthias Bergmann (matttias)} via \textcolor{DarkBackground}{\uline{cheatography.com/95537/cs/21113/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}Matthias Bergmann (matttias) \\
  \uline{cheatography.com/matttias} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 12th November, 2019.\\
   Updated 12th November, 2019.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{x{2.64 cm} x{5.36 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Configure VTP}}  \tn
% Row 0
\SetRowColor{LightBackground}
`vtp domain CCNA` & set the domain as CCNA \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`vtp mode server` & set mode (server, client or transparent) \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`vtp password cisco` & set password \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
`show vtp status` & confirm vtp config \tn 
% Row Count 8 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4.08 cm} x{3.92 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Configure DTP}}  \tn
% Row 0
\SetRowColor{LightBackground}
`interface f0/1` & enter interface configuration mode \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`switchport mode dynamic desirable` & set vtp mode (desirable or auto) \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`show interfaces trunk` & confirm trunk configuration \tn 
% Row Count 6 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{modes: client, trunk, dynamic desirable, dynamic auto \newline desirable actively tries to create trunk \newline auto only creates trunk when other side wants a trunk}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{2.8 cm} x{5.2 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Extended VLANs}}  \tn
% Row 0
\SetRowColor{LightBackground}
`vtp mode transparent` & switch must be transparent \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`vlan 2000` & any number higher than 1005 is an extended VLAN \tn 
% Row Count 4 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.68 cm} x{4.32 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Generic VLAN commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
`vlan 10` & create vlan with number 10 \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`name Red` & set the name of the VLAN \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`switchport mode {[}access|trunk{]}` & configure port as access or trunk port \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
`switchport access vlan 10` & configure port as belonging to vlan 10 \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`show vlan brief` & confirm vlan configuration \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.6 cm} x{4.4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Etherchannel - PAgP}}  \tn
% Row 0
\SetRowColor{LightBackground}
`interface range f0/3-4` & configure multiple interfaces at onc3 \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`channel-group 1 mode desirable` & add ports to etherchannel 1, mode can be auto or desirable \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{`no shutdown`} \tn 
% Row Count 6 (+ 1)
% Row 3
\SetRowColor{white}
`show run interface f0/3` & show configuration of specific interface \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`show interfaces f0/3 switchport` & see operational mode \tn 
% Row Count 10 (+ 2)
% Row 5
\SetRowColor{white}
`show etherchannel summary` & confirm that ehterchannel has been created \tn 
% Row Count 12 (+ 2)
% Row 6
\SetRowColor{LightBackground}
`interface port-channel 1` & configure the created etherchannel \tn 
% Row Count 14 (+ 2)
% Row 7
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{`switchport mode trunk`} \tn 
% Row Count 15 (+ 1)
% Row 8
\SetRowColor{LightBackground}
`switchport trunk native vlan 99` & acts like a normal switchport \tn 
% Row Count 17 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{desirable: try to create etherchannel automatically \newline auto: only create etherchannel when requested by other port}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.36 cm} x{4.64 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Link Aggregation - LACP}}  \tn
% Row 0
\SetRowColor{LightBackground}
`interface range f0/1-2` & configure multiple interfaces at once \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`switchport mode trunk` & set as trunk \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{`switchport trunk native vlan 99`} \tn 
% Row Count 5 (+ 1)
% Row 3
\SetRowColor{white}
`channel-group 2 mode active` & create link aggregation for ports - can  be active or passive \tn 
% Row Count 8 (+ 3)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{`no shutdown`} \tn 
% Row Count 9 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{active: try to create link aggregation automatically \newline passive: only create link aggregation when requested by other port}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}