\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{leostark}
\pdfinfo{
  /Title (infraschulung.pdf)
  /Creator (Cheatography)
  /Author (leostark)
  /Subject (InfraSchulung Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{3789E5}
\definecolor{LightBackground}{HTML}{F2F7FD}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{InfraSchulung Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{leostark} via \textcolor{DarkBackground}{\uline{cheatography.com/83252/cs/19745/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}leostark \\
  \uline{cheatography.com/leostark} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 3rd June, 2019.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{3}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Ablauf Pentest}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{1. Identifizieren von Zielen \newline % Row Count 1 (+ 1)
2. Auffinden von Services bzw. offenen Ports \newline % Row Count 2 (+ 1)
3. Identifizieren von \seqsplit{vorhandenen~Schwachstellen} innerhalb des Services \newline % Row Count 4 (+ 2)
4. Versuch erkannte Schwachstellen auszunutzen \newline % Row Count 5 (+ 1)
5. Privilege Escalation (falls n{\"o}tig) \newline % Row Count 6 (+ 1)
6. Dokumentation% Row Count 7 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{p{0.4577 cm} p{0.4577 cm} x{3.6616 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{5.377cm}}{\bf\textcolor{white}{netdiscover}}  \tn
% Row 0
\SetRowColor{LightBackground}
-p &  & Passive scanning ohne aktiven Eingriff in das Netzwerk \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
-r &  & \textless{}ip\textgreater{} Scan nach aktiven Hosts (beisp. 192.168.0.0/24, 192.168.0.1-255 \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
-i &  & (Interface, beisp. eth0, wlan0...) \tn 
% Row Count 7 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{0.9154 cm} p{0.4577 cm} x{3.2039 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{5.377cm}}{\bf\textcolor{white}{nmap}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{3}{x{5.377cm}}{{\emph{Scantypen}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
-sn &  & Ping Scan \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
-sS &  & Syn-Scan \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
-sT &  & Connect Scan \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{3}{x{5.377cm}}{Optionen} \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
-i &  & Interface (eth0, eth1, wlan0...) \tn 
% Row Count 7 (+ 2)
% Row 6
\SetRowColor{LightBackground}
-Pn &  & Alle Hosts als online behandeln \tn 
% Row Count 9 (+ 2)
% Row 7
\SetRowColor{white}
-T \textless{}1-5\textgreater{} &  & Geschwindigkeit bzw. Timeout \tn 
% Row Count 10 (+ 1)
% Row 8
\SetRowColor{LightBackground}
 &  & 1 - lange Timoutzeit \tn 
% Row Count 11 (+ 1)
% Row 9
\SetRowColor{white}
 &  & 5 - kurze Timeoutzeit \tn 
% Row Count 12 (+ 1)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{3}{x{5.377cm}}{{\emph{Port}}} \tn 
% Row Count 13 (+ 1)
% Row 11
\SetRowColor{white}
-p &  & Portangabe (80,444 , 0-80 ) \tn 
% Row Count 14 (+ 1)
% Row 12
\SetRowColor{LightBackground}
-F &  & Fastscan \tn 
% Row Count 15 (+ 1)
% Row 13
\SetRowColor{white}
\mymulticolumn{3}{x{5.377cm}}{{\emph{Output}}} \tn 
% Row Count 16 (+ 1)
% Row 14
\SetRowColor{LightBackground}
-oA &  & Ausgabe in alle Formate \tn 
% Row Count 17 (+ 1)
% Row 15
\SetRowColor{white}
-oX &  & XML Output \tn 
% Row Count 18 (+ 1)
% Row 16
\SetRowColor{LightBackground}
-oG &  & "grep"barer Output \tn 
% Row Count 19 (+ 1)
% Row 17
\SetRowColor{white}
-oN &  & Normaler Output \tn 
% Row Count 20 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.32733 cm} p{0.4577 cm} x{2.79197 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{5.377cm}}{\bf\textcolor{white}{Metasploit}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{3}{x{5.377cm}}{msfconsole} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
search &  & Suchen nach einer CVE Nummer \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
show options &  & Anzeigen der Einstellungen \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
use exploit/.. &  & Ausw{\"a}hlen eines Exploits \tn 
% Row Count 7 (+ 2)
% Row 4
\SetRowColor{LightBackground}
run / exploit &  & Ausführen der gew{\"a}hlten Aktionen \tn 
% Row Count 9 (+ 2)
% Row 5
\SetRowColor{white}
\mymulticolumn{3}{x{5.377cm}}{set ...} \tn 
% Row Count 10 (+ 1)
% Row 6
\SetRowColor{LightBackground}
...PAYLOAD &  & Auswahl der Payload \tn 
% Row Count 11 (+ 1)
% Row 7
\SetRowColor{white}
...RHOST &  & Remote Host (target) \tn 
% Row Count 12 (+ 1)
% Row 8
\SetRowColor{LightBackground}
...LHOST &  & Local Host (attacker) \tn 
% Row Count 13 (+ 1)
% Row 9
\SetRowColor{white}
...RPORT &  & Remote Port (target) \tn 
% Row Count 14 (+ 1)
% Row 10
\SetRowColor{LightBackground}
...LPORT &  & Local Port (attacker) \tn 
% Row Count 15 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}