\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{landling}
\pdfinfo{
  /Title (data-protection-manager-dpm.pdf)
  /Creator (Cheatography)
  /Author (landling)
  /Subject (Data Protection Manager (DPM) Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{A3A3A3}
\definecolor{LightBackground}{HTML}{F3F3F3}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Data Protection Manager (DPM) Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{landling} via \textcolor{DarkBackground}{\uline{cheatography.com/28494/cs/13417/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}landling \\
  \uline{cheatography.com/landling} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 6th November, 2017.\\
   Updated 6th November, 2017.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Server Installation}}  \tn
% Row 0
\SetRowColor{LightBackground}
\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{ac\}\}{\bf{DPM Server Prerequisite}} & \{\{nobreak\}\}Skal være DC eller medlem af AD\{\{nl\}\}\{\{nl\}\}{\bf{Præinstalleret i Server 2012 og nyere}}\{\{nl\}\}Installer C++ 2008 Redistributable.\{\{nl\}\}Windows Installer 4.5 eller nyere.\{\{nl\}\}PowerShell 2.0 eller nyere.\{\{nl\}\}SQL Server (Kan installeres lokalt under installationen).\{\{nl\}\}Microsoft Application Error Reporting.\{\{nl\}\}\{\{nl\}\}{\bf{Installeres manuelt.}}\{\{nl\}\}Installer .net 3.5 via Add Roles and Features.\{\{nl\}\}Aktiver SIS for DPM serveren.\{\{nl\}\} \tn 
% Row Count 23 (+ 23)
% Row 1
\SetRowColor{white}
{\bf{Aktivering af Single Instance Store (SIS) via PowerShell}} & \{\{nl\}\}{\bf{For Windows Server 2008 R2:}}\{\{nl\}\}start /wait ocsetup.exe SIS-Limited /quiet /norestart\{\{nl\}\}\{\{nl\}\}{\bf{For Windows Server 2012 og 2012 R2:}}\{\{nl\}\}dism /online \seqsplit{/enable-feature:SIS-Limited} \tn 
% Row Count 33 (+ 10)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{DPM Konfiguration}}  \tn
% Row 0
\SetRowColor{LightBackground}
\{\{nl\}\}{\bf{Opret Storage Pool}} & I DPM Administrator Console gå til Management tab og vælg Disks.\{\{nl\}\} Vælg Add fra ribbon i toppen og tilføj en initialiseret disk som ikke er formateret og add den til storage pool. Der kan tilføjes flere disks til en pool og klik Ok.\{\{nl\}\} \tn 
% Row Count 13 (+ 13)
% Row 1
\SetRowColor{white}
{\bf{Tilføj Agents der er manuelt installeret}} & I DPM Administrator Console gå til Management tab og vælg Agents.\{\{nl\}\} Tryk på Add i top ribbon og vælg attach agents i stedet for install. \{\{nl\}\} Vælg agentmaskinen på listen eller indtast navnet. \{\{nl\}\} \tn 
% Row Count 24 (+ 11)
% Row 2
\SetRowColor{LightBackground}
\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}{\bf{Opret Protection Group}} & I DPM Administrator Console gå til Protection og vælg New i top ribbon. \{\{nl\}\} Vælg gruppetypen (Client eller Server) \{\{nl\}\} Vælg hvad der skal tages backup af på hvilke maskiner og navngiv gruppen. \{\{nl\}\} Bestem frekvensen af backup og hvor ofte den skal køres, hvor meget plads der skal allokeres og fra hvilken storage pool. \{\{nl\}\} Så bestemmes hvordan data repliceres mellem klientmaskinen og DPM serveren samt hvordan consistency checks skal køres. \{\{nl\}\} {\bf{System State og Bare Metal backups}}\{\{nl\}\} Begge disse kræver rollen Windows Backup Server installeret på klienten for at fungere. \tn 
% Row Count 55 (+ 31)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Agent Installation}}  \tn
% Row 0
\SetRowColor{LightBackground}
\{\{nl\}\}\{\{nl\}\}{\bf{Installation af Data Protection Agent via DPM Administrator Console}} & {\bf{Firewall}}\{\{nl\}\}Følgende porte skal være åbne på klienten eller serveren der skal installeres på\{\{nl\}\}{\bf{TCP:}} 135, 139, 5718-5719, 88, 389, 445, 1024-65535\{\{nl\}\}{\bf{UDP:}} 53, 88, 137-138, 389\{\{nl\}\}1024-65535 kan lukkes igen efter installationen.\{\{nl\}\}\{\{nl\}\}{\bf{Agent Installation}}\{\{nl\}\}I DPM Administrator Console gå til Management tab og vælg Agents.\{\{nl\}\}Tryk på Install I top ribbon.\{\{nl\}\}Vælg computere eller tast navn og tryk Add.\{\{nl\}\}Angiv domæne administrator og installer. \tn 
% Row Count 25 (+ 25)
% Row 1
\SetRowColor{white}
\{\{nl\}\}{\bf{Manuel installation af Agent}} & Kør setup filen \seqsplit{DPMAgentInstaller.exe.} \{\{nl\}\}Bind agenten på maskinen til DPM server via cmd:\{\{nl\}\}cd c:\textbackslash{}"Program Files"\textbackslash{}"Microsoft Data Protection Manager"\textbackslash{}DPM\textbackslash{}bin\{\{nl\}\}SetDpmServer -dpmServerName {[}FQDN for DPM server{]}\{\{nl\}\}Firewall porte åbnes automatisk i processen. \tn 
% Row Count 39 (+ 14)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Agent Installation (cont)}}  \tn
% Row 2
\SetRowColor{LightBackground}
{\bf{VMWare server kan ikke tage System State backup. }} & På agentmaskinen laves følgende ændring.\{\{nl\}\}HKEY\_LOCAL\_Machine\textbackslash{}SYSTEM\textbackslash{}CurrentControlSet\textbackslash{}Services\textbackslash{}sok\{\{nl\}\}Ændrer Image path fra:\{\{nl\}\}\textbackslash{}SystemRoot\textbackslash{}system32\textbackslash{}drivers\textbackslash{}vsock.sys\{\{nl\}\}Til:\{\{nl\}\}system32\textbackslash{}drivers\textbackslash{}vsock.sys \tn 
% Row Count 11 (+ 11)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.76 cm} x{4.24 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Funktionsbeskrivelser}}  \tn
% Row 0
\SetRowColor{LightBackground}
\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}{\bf{Backup Proces}} & Et backupjob oprettes via DPM serveren og udføres lokalt på maskinen der først laver en lokal backup of efterfølgende starter en synkronisering af data mellem serveren og klienten. \{\{nl\}\} Hvis der skal laves Bare Metal eller System State Backup kræver der at klienten udover DPM agenten har Windows Backup Server installeret.\{\{nl\}\} Data placeres i Replica storage på serveren indtil det definerede tidspunkt hvor der skal oprettes recovery points. \{\{nl\}\} Det er først når der er oprettet et recovery point at data kan genskabes på klienten. \{\{nl\}\} \tn 
% Row Count 27 (+ 27)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Recovery Proces}}  \tn
% Row 0
\SetRowColor{LightBackground}
\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}{\bf{Restore Bare Metal}} & {\bf{Start Recovery på DPM serveren}}\{\{nl\}\} I DPM Administor Console gå til Recovery\{\{nl\}\} Find Server du vil restore og vælg recovery type og Copy to a network folder\{\{nl\}\} Vælg destination (Best Pratice er at oprette en ny lokation) \{\{nl\}\} Recovery'en starte og du kan tjekke status under Monitoring fanen\{\{nl\}\}\{\{nl\}\}  {\bf{Opsætning af Share}}\{\{nl\}\} Naviger til restore lokationen og lokaliser folderen med backuppen i. \{\{nl\}\} Share den folder hvor WindowsImageBackup er i, så root folderen bliver WindowsImageBackup\{\{nl\}\} WindowsImageBackup skal være root folder for at DPM kan restore dataen\{\{nl\}\}\{\{nl\}\}{\bf{Restore backup (Klient)}} \{\{nl\}\} Indsæt installations medie og klik på Repair Computer på Install fanen\{\{nl\}\} Vælg Restore your computer using a system image that you created earlier\{\{nl\}\} Vælg derefter Select a system image -\textgreater{} Advanced -\textgreater{} Search for a system image on the network\{\{nl\}\} Vælg restore point du vil gendanne til og vælg derefter Format and Repartition Disks\{\{nl\}\} \tn 
% Row Count 50 (+ 50)
% Row 1
\SetRowColor{white}
\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}\{\{nl\}\}{\bf{Restore System State}} & {\bf{Start Recovery på DPM serveren}}\{\{nl\}\} I DPM Administor Console gå til Recovery\{\{nl\}\} Find Server du vil restore og vælg recovery type og Copy to a network folder\{\{nl\}\} Vælg destination (Best Pratice er at oprette en ny lokation) \{\{nl\}\} Recovery'en starte og du kan tjekke status under Monitoring fanen\{\{nl\}\}\{\{nl\}\} {\bf{Opsætning af Share}}\{\{nl\}\} Giv WSB (Windows Server Backup) rettigheder til System State backup folderen\{\{nl\}\}\{\{nl\}\}  {\bf{Restore System State (Klient)}} {\bf{GUI}}\{\{nl\}\} Klik Actions -\textgreater{} Recover -\textgreater{} This Server\{\{nl\}\} Klik Another Server -\textgreater{} Specified Location Type -\textgreater{} Rempte shared folder og angiv sti\{\{nl\}\} Recovery Type = System State\{\{nl\}\} Lokation for System State backup = Original Lokation\{\{nl\}\}\{\{nl\}\}  {\bf{CLI}}\{\{nl\}\} Elevated CMD: \{\{nl\}\}  {\bf{wbadmin get versions –backuptarget \textless{}servername\textbackslash{}sharename\textgreater{}}}\{\{nl\}\} For at få versions identifier\{\{nl\}\}\{\{nl\}\} {\bf{ wbadmin start systemstaterecovery –version:\textless{}versionidentified\textgreater{} –backuptarget:\textless{}servername\textbackslash{}sharename\textgreater{}}}\{\{nl\}\} Starter System State Backup ud fra Versions Identifier \tn 
% Row Count 103 (+ 53)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Backup Proces}}  \tn
\SetRowColor{LightBackground}
\mymulticolumn{1}{p{8.4cm}}{\vspace{1px}\centerline{\includegraphics[width=5.1cm]{/web/www.cheatography.com/public/uploads/landling_1509985244_IC744508.jpeg}}} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}