\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{kahmic16}
\pdfinfo{
  /Title (vlans-etherchannel.pdf)
  /Creator (Cheatography)
  /Author (kahmic16)
  /Subject (VLANS + EtherChannel Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{05A398}
\definecolor{LightBackground}{HTML}{EFF9F8}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{VLANS + EtherChannel Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{kahmic16} via \textcolor{DarkBackground}{\uline{cheatography.com/100675/cs/21114/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}kahmic16 \\
  \uline{cheatography.com/kahmic16} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 12th November, 2019.\\
   Updated 13th November, 2019.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{3}

\begin{tabularx}{5.377cm}{x{2.14011 cm} x{2.83689 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{VTP}}  \tn
% Row 0
\SetRowColor{LightBackground}
`vtp domain CCNA` & selects the domain for the network \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`vtp mode server / client` & sets the mode of the device \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`vtp password cisco` & passwords for the vtp domain \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
`show vtp status` & verification command for vtp \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`vtp mode transparent` & set a device into transparent mode \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{2.43873 cm} x{2.53827 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{LACP}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{5.377cm}}{{\bf{Configure LACP between two switch}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
`switchport mode trunk` & in a interface range \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`switchport trunk native vlan 99` & set native vlan \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
`channel-group 2 mode active / passive` & set ports as active. on one switch active and on the other passive. commands above are the same on both switch \tn 
% Row Count 11 (+ 6)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Configuration 1}}  \tn
\SetRowColor{LightBackground}
\mymulticolumn{1}{p{5.377cm}}{\vspace{1px}\centerline{\includegraphics[width=5.1cm]{/web/www.cheatography.com/public/uploads/kahmic16_1573585193_1.jpeg}}} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{Pictures provided by Kilian St{\"o}ckler}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.9908 cm} x{2.9862 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{VLAN}}  \tn
% Row 0
\SetRowColor{LightBackground}
`vlan 10` & create vlan with the number 10 \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`name Management` & assign name to the previously created vlan \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`show vlan brief` & verify vlans \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
`switchport mode access` & set an interface to access mode to join vlans \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`switchport access vlan 10` & put interface into a vlan \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{2.33919 cm} x{2.63781 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{DTP}}  \tn
% Row 0
\SetRowColor{LightBackground}
`switchport mode dynamic desirable` & create a dynamic trunk (you need to be in an interface to do this) \tn 
% Row Count 4 (+ 4)
% Row 1
\SetRowColor{white}
`show interfaces trunk` & verify existing trunks \tn 
% Row Count 6 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`switchport mode trunk` & create a static trunk \tn 
% Row Count 8 (+ 2)
% Row 3
\SetRowColor{white}
`switchport trunk native vlan 99` & set the native vlan of a trunk \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Configuration 2}}  \tn
\SetRowColor{LightBackground}
\mymulticolumn{1}{p{5.377cm}}{\vspace{1px}\centerline{\includegraphics[width=5.1cm]{/web/www.cheatography.com/public/uploads/kahmic16_1573585209_2.jpeg}}} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{2.18988 cm} x{2.78712 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{PAgP}}  \tn
% Row 0
\SetRowColor{LightBackground}
`channel-group 1 mode desirable` & set a range of interfaces into desirable mode \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
`channel-group 1 mode auto` & set a range of interfaces into auto mode \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
`show run interface f0/3` & verification command \tn 
% Row Count 7 (+ 2)
% Row 3
\SetRowColor{white}
`show etherchannel summary` & show all etherchannels \tn 
% Row Count 9 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.89126 cm} x{3.08574 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Other verification commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
`show ip interface brief` & show overview of all interfaces \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
`show ip route` & show all routes \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
`show vlan brief` & show overview of all vlans and the ports in it \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
`show interface trunk` & show all trunks \tn 
% Row Count 7 (+ 2)
% Row 4
\SetRowColor{LightBackground}
`tracert {[}ip{]}` & show if hops to an ip are correct \tn 
% Row Count 9 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Configuration 3}}  \tn
\SetRowColor{LightBackground}
\mymulticolumn{1}{p{5.377cm}}{\vspace{1px}\centerline{\includegraphics[width=5.1cm]{/web/www.cheatography.com/public/uploads/kahmic16_1573585177_3.jpeg}}} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}