\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{JoshRie}
\pdfinfo{
  /Title (pyhton-pillow-image-processing.pdf)
  /Creator (Cheatography)
  /Author (JoshRie)
  /Subject (Pyhton Pillow Image Processing Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{0B2FA3}
\definecolor{LightBackground}{HTML}{EFF2F9}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Pyhton Pillow Image Processing Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{JoshRie} via \textcolor{DarkBackground}{\uline{cheatography.com/171441/cs/35982/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}JoshRie \\
  \uline{cheatography.com/joshrie} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 11th December, 2022.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{3}

\begin{tabularx}{5.377cm}{x{2.38896 cm} x{2.58804 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{Standard Informationen}}  \tn
% Row 0
\SetRowColor{LightBackground}
image = \seqsplit{Image.open("Bildname.format")} & Bild laden \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
image.show() & Gibt das Bild aus \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
image.size & Zeigt die Gr{\"o}{\ss}e des Bildes an \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
image.mode & Gibt den Farbmodus des Bildes an \tn 
% Row Count 7 (+ 2)
% Row 4
\SetRowColor{LightBackground}
image.format & Gibt das Dateiformat an \tn 
% Row Count 9 (+ 2)
% Row 5
\SetRowColor{white}
print() & Wird ben{\"o}tigt um Informationen auszugeben \tn 
% Row Count 12 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.55618 cm} x{1.51041 cm} x{1.51041 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{5.377cm}}{\bf\textcolor{white}{Bildmanipulation}}  \tn
% Row 0
\SetRowColor{LightBackground}
\seqsplit{image.transpose(Image.PARAMETER)} & \seqsplit{FLIP\_LEFT\_RIGHT}, \seqsplit{FLIP\_TOP\_BOTTOM}, ROTATE\_90, ROTATE\_180 & Spiegelt das Bild \tn 
% Row Count 5 (+ 5)
% Row 1
\SetRowColor{white}
\seqsplit{image.rotate(Gradzahl}, expand=) & Gradzahl der Rotierung, expand = True/False & Rotiert das Bild. Expand gibt an ob das gesamte Bild zu sehen ist \tn 
% Row Count 10 (+ 5)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{image.crop((Links}, Oben, Rechts, Unten)) & Tupel an Zahlen geben Abstand zum Rand an & Schneidet das Bild zu \tn 
% Row Count 14 (+ 4)
% Row 3
\SetRowColor{white}
\seqsplit{image.resize((Breite}, H{\"o}he)) & Tupel mit neuen Ma{\ss}en des Bildes & Schneidet Bild auf bestimmte Ma{\ss}e zu \tn 
% Row Count 17 (+ 3)
% Row 4
\SetRowColor{LightBackground}
\seqsplit{image.save("Bild.format"}, format=) & format speichert das neue Format. Z.b "PNG" & Speichert das Bild mit neuem Format \tn 
% Row Count 21 (+ 4)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\SetRowColor{LightBackground}
\mymulticolumn{3}{x{5.377cm}}{Mittlerer Block zeigt m{\"o}gliche Parameter und deren Beschreibung.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.55618 cm} x{1.51041 cm} x{1.51041 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{5.377cm}}{\bf\textcolor{white}{Farben und Filter}}  \tn
% Row 0
\SetRowColor{LightBackground}
\seqsplit{image.getbands()} &  & Gibt die Farbb{\"a}nder aus \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\seqsplit{image.convert(mode=)} & Mode gibt Farbmode an. Z.b 'L' für Graufilter & Ändert den Farbmode des Bildes \tn 
% Row Count 6 (+ 4)
% Row 2
\SetRowColor{LightBackground}
r, g, b = \seqsplit{image.split()} & r, g, b speichert das jeweilige Band & Splitet die Farbb{\"a}nder auf \tn 
% Row Count 9 (+ 3)
% Row 3
\SetRowColor{white}
\seqsplit{image.merge("RGB"}, (B{\"a}nder)) & B{\"a}nder: Reihenfolge der B{\"a}nder angeben & Setzt die Farbb{\"a}nder neu zusammen \tn 
% Row Count 13 (+ 4)
% Row 4
\SetRowColor{LightBackground}
\seqsplit{image.filter(ImageFilter.PARAMETER)} & BLUR, CONTUR, \seqsplit{EDGE\_ENHANCE}, \seqsplit{EDGE\_ENHANCE\_MORE}, EMBOSS, FIND\_EDGES, SHARPEN, SMOOTH, SMOOTH\_MORE & Wendet einen Filter auf das Bild an \tn 
% Row Count 21 (+ 8)
% Row 5
\SetRowColor{white}
\seqsplit{image.filter(ImageFilter.Kernel(size=}, kernel=, scale=, offset=) & size gibt die Kernelgr{\"o}{\ss}e an, Kernel gibt den Kernel an, scale und offset sind Faktoren die mit dem Ergebnis verrechnet werden & Wendet einen Convolution Kernel auf das Bild an \tn 
% Row Count 31 (+ 10)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}