\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{jianandre1011}
\pdfinfo{
  /Title (unit-conversion-dimensions-and-measurement.pdf)
  /Creator (Cheatography)
  /Author (jianandre1011)
  /Subject (Unit Conversion, Dimensions \& Measurement Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{A3A3A3}
\definecolor{LightBackground}{HTML}{F3F3F3}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Unit Conversion, Dimensions \& Measurement Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{jianandre1011} via \textcolor{DarkBackground}{\uline{cheatography.com/162853/cs/34099/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}jianandre1011 \\
  \uline{cheatography.com/jianandre1011} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 11th September, 2022.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Fundamental or Base Quanitites}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{The quantities which do not depend upon other quantities for their complete definition are known as {\bf{fundamental}} or {\bf{base quantities}}. \newline % Row Count 3 (+ 3)
e.g.: length, mass, time, etc.% Row Count 4 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Derived Quantities}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{The quantities which can be expressed in terms of the fundamental quantities are known as {\bf{derived quantities}}. \newline % Row Count 3 (+ 3)
e.g.: Speed = distance/time, Volume = length*breadth% Row Count 5 (+ 2)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Units of Physical Quantities}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{The chosen reference standard of measurement in multiples of which, a physical quantity is expressed is called the {\bf{unit}} of the quantity. \newline % Row Count 3 (+ 3)
e.g.: Physical Quantity = Numerical Value x Unit% Row Count 4 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.04 cm} x{4.96 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Length Conversion}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Metric to American}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
2.54cm & 1in \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{American}}} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
12 inches (in) & 1 foot (ft) \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
3 feet (ft) & 1 yard (yd) \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
220 yards (yd) & 1 furlong (fur) \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
8 furlongs (fur) & 1 mile \tn 
% Row Count 8 (+ 2)
% Row 7
\SetRowColor{white}
1 mile & 1760 yd, 5280 ft, 63360 in \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{p{2.4 cm} x{5.6 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Mass Conversion}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Metric to American}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
1kg & 2.2046lbs \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
1g & 0.0353oz \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{{\bf{American}}} \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
1oz & 16dr \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
1lb & 16oz \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
1cwt & 100lbs \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
1ton & 20cwt, 2000lbs \tn 
% Row Count 8 (+ 1)
% Row 8
\SetRowColor{LightBackground}
1tonne & 1000kg \tn 
% Row Count 9 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.876 cm} x{1.672 cm} x{2.052 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{8.4cm}}{\bf\textcolor{white}{SI Base Units}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{Base Unit}} & {\bf{Unit}} & {\bf{Symbol}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
Length & Meter & m \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
Mass & \seqsplit{Kilogram} & kg \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
Time & Second & s \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
Temperature & Kelvin & k \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
Electric Current & Ampere & A \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
Intensity of Light & Candela & cd \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
Amount of Substance & Mole & mol \tn 
% Row Count 8 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Prefixes for Different Powers of 10}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{{\bf{Power of 10}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{10\textasciicircum{}18\textasciicircum{}} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{10\textasciicircum{}15\textasciicircum{}} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{10\textasciicircum{}12\textasciicircum{}} \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{10\textasciicircum{}9\textasciicircum{}} \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{10\textasciicircum{}6\textasciicircum{}} \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{10\textasciicircum{}3\textasciicircum{}} \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{10\textasciicircum{}2\textasciicircum{}} \tn 
% Row Count 8 (+ 1)
% Row 8
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{10\textasciicircum{}1\textasciicircum{}} \tn 
% Row Count 9 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Dimensional Formula}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{The relation which expresses physical quantities in terms of appropriate powers of fundamental quantities.% Row Count 3 (+ 3)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Use of Dimensional Analysis}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{To check the dimensional correctness of a given physical relation.} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{To derive relationship between different physical quantities.} \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{To convert units of a physical quantity from one system to another.} \tn 
% Row Count 6 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}