\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{José Carlos (jcarlosweb)}
\pdfinfo{
  /Title (chuleta-de-git-en-espanol.pdf)
  /Creator (Cheatography)
  /Author (José Carlos (jcarlosweb))
  /Subject (Chuleta de Git en Español Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{A3A3A3}
\definecolor{LightBackground}{HTML}{F3F3F3}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Chuleta de Git en Español Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{José Carlos (jcarlosweb)} via \textcolor{DarkBackground}{\uline{cheatography.com/131894/cs/26603/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}José Carlos (jcarlosweb) \\
  \uline{cheatography.com/jcarlosweb} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 13th February, 2021.\\
   Updated 17th February, 2021.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{3}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Estados}}  \tn
\SetRowColor{LightBackground}
\mymulticolumn{1}{p{5.377cm}}{\vspace{1px}\centerline{\includegraphics[width=5.1cm]{/web/www.cheatography.com/public/uploads/jcarlosweb_1613248985_estados.jpg}}} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Publicar}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git push origin main`} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`origin`: Repositorio remoto, por defecto origin} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`main`: Rama principal, por defecto en github (antes era master)} \tn 
% Row Count 4 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git push` Envía los cambios automáticamente al origin y rama actual} \tn 
% Row Count 6 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git push -f` Para cuando quieres forzar la subida y trabajas solo o también cuando quieres joder al equipo} \tn 
% Row Count 9 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git push -u origin main`: Tambien se puede usar para indicar el repositorio remoto. \newline  \newline `-u`: Es un  flag de `-{}-set-upstream`, se refiere al repositorio remoto principal al que harás pull y push, esta opción se utiliza una sola vez y se puede configurar en el .gitconfig}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Ramas (Branch)}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git branch`: Lista toda las ramas} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git branch -d \textless{}branch-name\textgreater{}`: Elimina una rama} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git checkout \textless{}branch-name\textgreater{}`: Cambia de rama} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git checkout -b \textless{}branch-name\textgreater{}`: Cambia de rama y si no existe la crea} \tn 
% Row Count 5 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Unir o fusionar ramas}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git merge \textless{}rama\textgreater{}`: Fusiona la rama indicada con la actual} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git merge -{}-no-ff \textless{}rama\textgreater{}`: Fusiona la rama sin avance rápido, es decir creando commit y dejando historial en el head} \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git merge -{}-squash \textless{}rama\textgreater{}`: Unir todos los commit en uno solo de la rama y fusionar.} \tn 
% Row Count 7 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git rebase \textless{}rama\textgreater{}`} \tn 
% Row Count 8 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git rebase -i HEAD\textasciitilde{}3`: Los últimos 3 commits} \tn 
% Row Count 9 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`-i`: Modo interactivo pudiendo poner squash en todos menos el primero para unir todos los commits} \tn 
% Row Count 11 (+ 2)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{Unir commits sin rebase: \seqsplit{https://stackoverflow.com/a/5201642/2046442}} \tn 
% Row Count 13 (+ 2)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git reset -{}-soft HEAD\textasciitilde{}3 \&\& git commit`} \tn 
% Row Count 14 (+ 1)
% Row 8
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git commit -{}-edit -m"\$(git log -{}-format=\%B -{}-reverse HEAD..HEAD@\{1\})"`} \tn 
% Row Count 16 (+ 2)
% Row 9
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git reset -{}-rebase`: Deshacer rebase} \tn 
% Row Count 17 (+ 1)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git reset -{}-merge`:  Deshacer merge} \tn 
% Row Count 18 (+ 1)
% Row 11
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{Git rebase}} básicamente lo que hace es recopilar uno a uno los cambios confirmados en una rama, y reaplicarlos sobre otra. Utilizar rebase nos puede ayudar a evitar conflictos siempre que se aplique sobre commits que están en local y no han sido subidos a ningún repositorio remoto.} \tn 
% Row Count 24 (+ 6)
% Row 12
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{es una manera de unir los cambios que hagamos en un branch dedicado a algún feature o un hotfix hacia nuestro branch principal pero manteniendo cierto orden en nuestra línea de tiempo, teniendo todo dentro de un sólo timeline.} \tn 
% Row Count 29 (+ 5)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{.gitconfig \textasciitilde{}/.gitconfig}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git config -{}-global user.name "jcarlosweb"`} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git config -{}-global user.email "nomeacuerdo@gmail.com"`} \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git config -{}-global core.filemode false`} \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git config -{}-global pull.rebase true`} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git config -{}-global rebase.autoStash true`} \tn 
% Row Count 6 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git config -{}-global init.defaultBranch "main"`} \tn 
% Row Count 7 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Iniciar repositorio}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git init`} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git clone \seqsplit{https://github.com/username/repository-name.git`}} \tn 
% Row Count 3 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Añadir cambios}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git add .` añade todo} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git commit -m "Mi primer commit"`} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git commit -am "Mi segundo commit para archivos modificados"`} \tn 
% Row Count 4 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`-am` es evitar ahorrarte el paso de añadir y hacer todo de una vez, pero solo vale para archivos modificados, no para nuevos.} \tn 
% Row Count 7 (+ 3)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git commit -{}-amend -m "Este es el mensaje correcto"`: Modificar un commit existente sin haber hecho push} \tn 
% Row Count 10 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Deshacer cambios en Local}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git reset \textless{}commit-id-or-HEAD\textasciitilde{}1\textgreater{}`} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`-{}-mixed`: Por defecto. Elimina los commit, no conserva los cambios en el stage area y mantiene los cambios en el working tree} \tn 
% Row Count 4 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`-{}-soft`: Elimina los commit, conserva los cambios en el stage area y mantiene los cambios en el working tree} \tn 
% Row Count 7 (+ 3)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`-{}-hard`: Elimina los commit, no conserva los cambios en el stage area y deshace los cambios en el working tree} \tn 
% Row Count 10 (+ 3)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git checkout -{}- \textless{}nombre-archivo\textgreater{}`} \tn 
% Row Count 11 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git checkout \textless{}commit\textgreater{}` Utiliza git checkout para desplazarte por el historial de confirmaciones y consultarlo.} \tn 
% Row Count 14 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Deshacer cambios en remoto}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git revert \textless{}commit-id\textgreater{}`} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git revert @`} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`@`: Último commit} \tn 
% Row Count 3 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Actualizar desde remoto}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git remove -v`: Listar todos los remotos configurados} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git remote show \textless{}remote\textgreater{}`: Mostrar información sobre el remoto} \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git fetch \textless{}remote\textgreater{}`: Descargar todo los cambios, pero no lo integra en el HEAD} \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git pull \textless{}remote\textgreater{} \textless{}branch\textgreater{}`: Descarga y directamente lo integra/merge en el HEAD. Es decir fetch + merge} \tn 
% Row Count 9 (+ 3)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git pull -{}-rebase`:  La opción "-{}-rebase" nos permite, de forma ordenada, uno a uno ir aplicando nuestros commits sobre el código que estaba en github} \tn 
% Row Count 13 (+ 4)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git fetch \&\& git rebase -{}-autostash`:  Guardar automáticamente los cambios antes de realizar la operación de rebase. Antes de ese lanzamiento, rebase simplemente se negaría a ejecutarse.  Equivalente a: `git stash \& git pull -{}-rebase \& git stash pop`} \tn 
% Row Count 19 (+ 6)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git rebase -{}-abort`} \tn 
% Row Count 20 (+ 1)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git rebase -{}-continue`} \tn 
% Row Count 21 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{El concepto de {\bf{HEAD}} es muy simple: se refiere al commit en el que está tu repositorio posicionado en cada momento. Por regla general HEAD suele coincidir con el último commit de la rama en la que estés, ya que habitualmente estás trabajando en lo último. Pero si te mueves hacia cualquier otro commit anterior entonces el HEAD estará más atrás. \newline  \newline https://www.campusmvp.es/recursos/post/git-los-conceptos-de-master-origin-y-head.aspx}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.28156 cm} x{2.24273 cm} x{1.05271 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{3}{x{5.377cm}}{\bf\textcolor{white}{Estado, inspeccionar y comparar}}  \tn
% Row 0
\SetRowColor{LightBackground}
Estado & Inspeccionar & Comparar \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
`git status` & `git log -{}-oneline` & `git diff` \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
 & `git blame \textless{}archivo\textgreater{}` &  \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
 & `git show` &  \tn 
% Row Count 6 (+ 1)
% Row 4
\SetRowColor{LightBackground}
 & `git reflog` &  \tn 
% Row Count 7 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}---}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{.Gitignore}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`/docker/`: Ignora solo el directorio docker} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`docker/`: Ignora todos los directorios docker} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`*.log`: Ignora todos los archivos con la extensión log} \tn 
% Row Count 4 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`/var/cache/*`: Ignorar todos los archivos de la carpeta cache} \tn 
% Row Count 6 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`!var/cache/.gitkeep`: Mantener el archivo. gitkeep} \tn 
% Row Count 8 (+ 2)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{Reiniciar .gitignore}}} \tn 
% Row Count 9 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git rm -r -{}-cached . \&\& git add . \&\& git commit -m "update .gitignore"`} \tn 
% Row Count 11 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Utilidades}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{Cherry Pick}}: Traerte uno varios commit de una rama a otra sin necesidad de hacer un merge} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git cherry-pick \textless{}commit-ID\textgreater{}`} \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{{\bf{Bisect}}:  Para encontrar bugs} \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git bisect start \textless{}begin\textgreater{} \textless{}end\textgreater{}`} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git bisect reset`} \tn 
% Row Count 6 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git bisect run "test -f mojón"`} \tn 
% Row Count 7 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git bisect run test.sh`} \tn 
% Row Count 8 (+ 1)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{Dejar de monitorizar un archivo}}} \tn 
% Row Count 9 (+ 1)
% Row 8
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git update-index -{}-assume-unchanged nocheck.php`} \tn 
% Row Count 10 (+ 1)
% Row 9
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{Volver a monotorizar}}} \tn 
% Row Count 11 (+ 1)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git update-index -{}-no-assume-unchanged nocheck.php`} \tn 
% Row Count 13 (+ 2)
% Row 11
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{Stash}}:  coge los cambios sin confirmar (tanto los que están preparados como los que no), los guarda aparte para usarlos más adelante y, acto seguido, los deshace en el código en el que estás trabajando} \tn 
% Row Count 18 (+ 5)
% Row 12
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git stash`:Lo almacena} \tn 
% Row Count 19 (+ 1)
% Row 13
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{`git stash pop`: Lo recupera} \tn 
% Row Count 20 (+ 1)
% Row 14
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{`git stash apply`: Lo recupera, pero no lo elimina del stash} \tn 
% Row Count 22 (+ 2)
% Row 15
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{Alias}}} \tn 
% Row Count 23 (+ 1)
% Row 16
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{\seqsplit{https://stackoverflow.com/a/2553799/2046442}} \tn 
% Row Count 24 (+ 1)
% Row 17
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{Git Extras}}} \tn 
% Row Count 25 (+ 1)
% Row 18
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{\seqsplit{https://github.com/tj/git-extras/blob/master/Commands.md}} \tn 
% Row Count 27 (+ 2)
% Row 19
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{{\bf{TLDR}}} \tn 
% Row Count 28 (+ 1)
% Row 20
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{\seqsplit{https://github.com/raylee/tldr-sh-client}} \tn 
% Row Count 29 (+ 1)
% Row 21
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{\seqsplit{https://explainshell.com/explain?cmd=git+commit+-a+-m}} \tn 
% Row Count 31 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Utilidades (cont)}}  \tn
% Row 22
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{\seqsplit{https://www.clicksolution.es/\#home}} \tn 
% Row Count 1 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Git Gui}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{Source Tree} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{PHPStorm Git} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{VS Code Git} \tn 
% Row Count 3 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}