\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{IFK2017 (IFK2017)}
\pdfinfo{
  /Title (cisco-nt.pdf)
  /Creator (Cheatography)
  /Author (IFK2017 (IFK2017))
  /Subject (Cisco NT Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{DBB704}
\definecolor{LightBackground}{HTML}{FCFAEF}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Cisco NT Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{IFK2017 (IFK2017)} via \textcolor{DarkBackground}{\uline{cheatography.com/110960/cs/21604/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}IFK2017 (IFK2017) \\
  \uline{cheatography.com/ifk2017} \\
        \uline{\seqsplit{www}.gidf.de}
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 17th January, 2020.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{x{4.72 cm} x{3.28 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Basic Mode Switch Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
Router\textgreater{} enable & Privileged EXEC \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
Router\# configure terminal & Global Configuration \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
Router(config)\# interface G0/1 & Interface Configuration G0/1 \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
Router(config)\# interface type sub interface number & Sub-Interface Configuration \tn 
% Row Count 8 (+ 3)
% Row 4
\SetRowColor{LightBackground}
exit & back one mode \tn 
% Row Count 9 (+ 1)
% Row 5
\SetRowColor{white}
\textless{}Shift\textgreater{} and  \textless{}Ctrl\textgreater{} and 6 then x & Suspend or abort \tn 
% Row Count 11 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{2.64 cm} x{5.36 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Info Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
show ip protocols & Show Routing protocol infos \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
debug ip rip & enable rip update infos every 30a \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
show hosts & show configured hosts \tn 
% Row Count 5 (+ 1)
% Row 3
\SetRowColor{white}
show interface brief & show current interface config for all interfaces \tn 
% Row Count 7 (+ 2)
% Row 4
\SetRowColor{LightBackground}
show version & View version information \tn 
% Row Count 8 (+ 1)
% Row 5
\SetRowColor{white}
show \seqsplit{running-config} & View current configuration (DRAM) \tn 
% Row Count 10 (+ 2)
% Row 6
\SetRowColor{LightBackground}
show \seqsplit{startup-config} & View startup configuration (NVRAM) \tn 
% Row Count 12 (+ 2)
% Row 7
\SetRowColor{white}
show flash & Show IOS file and flash space \tn 
% Row Count 14 (+ 2)
% Row 8
\SetRowColor{LightBackground}
show log & Shows all logs that the router has in its memory \tn 
% Row Count 16 (+ 2)
% Row 9
\SetRowColor{white}
show interface e0 & View the interface status of interface e0 \tn 
% Row Count 18 (+ 2)
% Row 10
\SetRowColor{LightBackground}
show cdp neighbor & Display a summary of connected cdp devices \tn 
% Row Count 20 (+ 2)
% Row 11
\SetRowColor{white}
show cdp entry * & Display detailed information on all devices \tn 
% Row Count 22 (+ 2)
% Row 12
\SetRowColor{LightBackground}
show ip protocols & Display current routing protocols \tn 
% Row Count 24 (+ 2)
% Row 13
\SetRowColor{white}
show ip route & Display IP routing table \tn 
% Row Count 25 (+ 1)
% Row 14
\SetRowColor{LightBackground}
show access-lists & Display access lists, this includes the number of displayed matches \tn 
% Row Count 28 (+ 3)
% Row 15
\SetRowColor{white}
show frame-relay map & Display the frame inverse ARP table \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{8.4cm}{x{2.64 cm} x{5.36 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Info Commands (cont)}}  \tn
% Row 16
\SetRowColor{LightBackground}
show frame-relay pvc & Check a Frame Relay PVC connections \tn 
% Row Count 2 (+ 2)
% Row 17
\SetRowColor{white}
show frame-relay lmi & show lmi traffic stats \tn 
% Row Count 4 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{all in Router\#}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Basic Config}}  \tn
% Row 0
\SetRowColor{LightBackground}
Router(config)\# ip host HOST IPADDRESS & add new host with ip=IPADDRESS \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
Router\# copy running-config startup-config & save running configuration in NVRAM \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
Router\# erease startup-config & delete startup config, after next restart router will be back to default \tn 
% Row Count 9 (+ 4)
% Row 3
\SetRowColor{white}
Router(config)\#ip route REMOTEIP REMOTESUBNET NEXTHOPIP COST & add static route to remote network with specific cost \tn 
% Row Count 12 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4.8 cm} x{3.2 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Interface Config}}  \tn
% Row 0
\SetRowColor{LightBackground}
Router(config)\# int s0/1 & open interface s0/1 \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
Router(config-if)\# ip address IPADDRESS SUBNETMASK & set IP address of interface \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
Router(config-if)\# no shut & change interface to up \tn 
% Row Count 7 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Routing (RIP)}}  \tn
% Row 0
\SetRowColor{LightBackground}
Router(config)\# router rip & enable rip \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\seqsplit{Router(config-router)\#} version 2 & rip version \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{Router(config-router)\#} network IPADDRESS & add network to rip routing (IPADDRESS = Netzadresse) \tn 
% Row Count 7 (+ 3)
% Row 3
\SetRowColor{white}
\seqsplit{Router(config-router)\#} neighbor IPADDRESS & Defines a neighboring device with which to exchange routing information \tn 
% Row Count 11 (+ 4)
% Row 4
\SetRowColor{LightBackground}
\seqsplit{Router(config-router)\#} no auto-summary & turn off auto-summary \tn 
% Row Count 13 (+ 2)
% Row 5
\SetRowColor{white}
\seqsplit{Router(config-router)\#} \{\{nl\}\}passive-interface g0/0 & prevent the interface\{\{nl\}\} from sending out routing updates TO g0/0 but \{\{nl\}\}allow the interface to receive updates FROM g0/0 \tn 
% Row Count 20 (+ 7)
% Row 6
\SetRowColor{LightBackground}
\seqsplit{Router(config-router)\#} end & back to privileged exec \tn 
% Row Count 22 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Reihenfolge Config}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{Endger{\"a}te} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{Interface "au{\ss}en" (Richtung Endger{\"a}t)} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{8.4cm}}{Interface "innen"} \tn 
% Row Count 3 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}