\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{hanslissi}
\pdfinfo{
  /Title (scaling-vlans-etherchannel.pdf)
  /Creator (Cheatography)
  /Author (hanslissi)
  /Subject (Scaling VLANS\_EtherChannel Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{009FB8}
\definecolor{LightBackground}{HTML}{EFF9FA}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Scaling VLANS\_EtherChannel Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{hanslissi} via \textcolor{DarkBackground}{\uline{cheatography.com/100609/cs/21101/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}hanslissi \\
  \uline{cheatography.com/hanslissi} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 13th November, 2019.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{x{3.76 cm} x{4.24 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{VTP Config}}  \tn
% Row 0
\SetRowColor{LightBackground}
vtp domain \textless{}domain\textgreater{} & Sets the vtp domain of the switch. \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
vtp mode \textless{}server|client|transparent\textgreater{} & Sets the vtp mode to either server, client or transparent. \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
vtp password \textless{}password\textgreater{} & Sets the vtp password of the switch. \tn 
% Row Count 7 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{2.4 cm} x{5.6 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{VTP Verification}}  \tn
% Row 0
\SetRowColor{LightBackground}
show vtp status & shows current vtp status (with Revision number, vtp mode,...) \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
show vtp password & shows vtp password \tn 
% Row Count 5 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{DTP Config}}  \tn
% Row 0
\SetRowColor{LightBackground}
switchport mode \textless{}trunk|access|dynamic desirable|dynamic auto\textgreater{} & Sets the port mode to either trunk, access,... \tn 
% Row Count 4 (+ 4)
% Row 1
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{show dtp interface \textless{}interface\textgreater{}} \tn 
% Row Count 5 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.92 cm} x{4.08 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Switchport commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
show interfaces trunk & Shows all trunk ports, what the native vlan of the port is,... \tn 
% Row Count 4 (+ 4)
% Row 1
\SetRowColor{white}
show interfaces \textless{}interface\textgreater{} switchport & shows all switchport info of interface. \tn 
% Row Count 6 (+ 2)
% Row 2
\SetRowColor{LightBackground}
switchport trunk native vlan \textless{}number\textgreater{} & sets the native vlan of the selected interface \tn 
% Row Count 9 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.6 cm} x{4.4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{VLAN config}}  \tn
% Row 0
\SetRowColor{LightBackground}
vlan \textless{}number\textgreater{} & creates a clan \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
name \textless{}name\textgreater{} & After vlan created the name can be set \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
show vlan {[}brief | id \textless{}vlan-id\textgreater{}{]} & shows the vlan. brief is a summary. \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
interface vlan \textless{}number\textgreater{} & creates a SVI where you can set a IP address \tn 
% Row Count 7 (+ 2)
% Row 4
\SetRowColor{LightBackground}
encapsulation dot1q \textless{}vlan-number\textgreater{} & Router command. Sets encapsulation (used for subinterfaces) \tn 
% Row Count 10 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Ether Channel}}  \tn
% Row 0
\SetRowColor{LightBackground}
interface range \textless{}range\textgreater{} & selects multiple interfaces. \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
channel-group \textless{}number\textgreater{} mode \textless{}desirable|auto|active,passive\textgreater{} & creates the ether channel for the interface range selected. \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
interface port-channel \textless{}number\textgreater{} & selects the ether channel to set the switchport mode,... \tn 
% Row Count 8 (+ 3)
% Row 3
\SetRowColor{white}
show etherchannel summary & shows ether channel related \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{p{5.36 cm} p{2.64 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Ether Channel sign}}  \tn
% Row 0
\SetRowColor{LightBackground}
-A & A \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
A & B \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
C & D \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
E & F \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
G & H \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
I & J \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
K & L \tn 
% Row Count 7 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{p{4 cm} p{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{DTP Behaviour}}  \tn
% Row 0
\SetRowColor{LightBackground}
- & - \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
- & - \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
- & - \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
- & - \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
- & - \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
- & - \tn 
% Row Count 6 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.28 cm} x{4.72 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Other Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
show ip route & Shows routing table \tn 
% Row Count 1 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}