\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{groni (groni)}
\pdfinfo{
  /Title (pisi-linux-command-line-guide.pdf)
  /Creator (Cheatography)
  /Author (groni (groni))
  /Subject (Pisi Linux Command Line Guide Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{120DA3}
\definecolor{LightBackground}{HTML}{F7F7FC}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Pisi Linux Command Line Guide Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{groni (groni)} via \textcolor{DarkBackground}{\uline{cheatography.com/20347/cs/3141/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}groni (groni) \\
  \uline{cheatography.com/groni} \\
        \uline{\seqsplit{pisilinuxgermany}.wordpress.com/}
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 5th January, 2015.\\
   Updated 13th May, 2016.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.


\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Listing Packages:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi list-available repo-name% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{list-available command with repo-name parameter is used in order to list all packages in the proper repository}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Getting Help:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi help  \newline % Row Count 1 (+ 1)
pisi help command-name% Row Count 2 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{help command is used in order to get help about pisi-cli. \newline help command with command-name parameter can be used for getting help about a specific command.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Displaying history:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi history% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{history command displays the history of \seqsplit{installations/deinstallations/updates} of packages.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Removing Locks:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi clean% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{clean command is used in order to delete outdated locks.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Getting Package Relations:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi graph package-name% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{graph command with package-name parameter is used for getting package relations via graphviz.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Searching Files:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi search-file /path/file% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{search-file command with file-name parameter is used in order to find which package does a file belong to.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Deleting Files in Cache:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi delete-cache% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{delete-cache command is used in order to delete files( packages, source codes etc.) stored in cache and this clean up your System.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Other Operations:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Rebuilding PiSi Database \newline % Row Count 1 (+ 1)
pisi rebuild-db% Row Count 2 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{rebuild-db command is used in order to rebuild pisi package database.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Checking Packages:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi check package-name% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{check command with package-name parameter is used for checking if the package is installed correctly.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Searching Packages:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi search search-key1 search-key2% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{searching for packages}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Configuring Pending Packages}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi configure-pending% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{configure-pending command is be used in order to configure packages which are not already configured by COMAR}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Listing Source Packages:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi list-sources% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{list-sources command is used for listing available source packages}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Listing Pending Packages:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi list-pending% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{list-pending command is used for listing pending package operations.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Listing Installed Packages:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{list-installed command is used in order to list installed packages.  \newline % Row Count 2 (+ 2)
pisi list-installed  \newline % Row Count 3 (+ 1)
list-installed command with repo-name parameter is used in order to list installed packages from a proper repository  \newline % Row Count 6 (+ 3)
pisi list-installed repo-name% Row Count 7 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Listing Upgrades:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi list-upgrades% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{list-upgrades command is used in order to list upgrades in all repositories.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Listing Packages:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi list-available% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{list-available command is used in order to list all packages in the all repositories.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{x{6.7353 cm} x{10.5347 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{17.67cm}}{\bf\textcolor{white}{Repository Operations}}  \tn
% Row 0
\SetRowColor{LightBackground}
pisi add-repo repo-address & \seqsplit{http://repo.address.com/repo/directory/pisi-index.xml} \tn 
% Row Count 3 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{17.67cm}}{• Local addresses i.e. \seqsplit{/home/example/pisi/repo/pisi-index}.xml  \newline  \newline • Web addresses i.e. \seqsplit{http://example.com/pisi/repo/pisi-index.xml}  \newline  \newline Note: Default name for repository index file is pisi-index.xml, but compressing it as pisi-index.xml.bz2 can  \newline  \newline also be used in order to prevent high bandwidth usage.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Building Packages from Source Repository:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi emerge package-name% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{emerge command with package-name parameter is used in order to build a package and all dependencies from the source repository.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Building Packages from Source:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi build \seqsplit{/home/example/pisi/repo/pisi-index}.xml% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{build command with package-address parameter is used in order to build packages from source.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Getting Package Information:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi info package-name  \newline % Row Count 1 (+ 1)
pisi info package-name1 package-name2% Row Count 2 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{info command with package-name parameter is used in order to get information about a package. Getting  \newline information for multiple packages can be achieved by separating the packages names by a space.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Excluding Packages from upgrade:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{To update all the updatable packages exceptCreating Repository Index  \newline % Row Count 2 (+ 2)
firefox:  \newline % Row Count 3 (+ 1)
pisi upgrade -x firefox  \newline % Row Count 4 (+ 1)
Similarly, if you don't want to update the packages that are part of the desktop.kde system component, do :  \newline % Row Count 7 (+ 3)
pisi upgrade -x desktop.kde  \newline % Row Count 8 (+ 1)
Updating just one package without updating the others  \newline % Row Count 10 (+ 2)
pisi upgrade package-name –ignore-safety% Row Count 11 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Upgrading Packages:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi upgrade package-name  \newline % Row Count 1 (+ 1)
pisi upgrade package-name1 package-name2  \newline % Row Count 2 (+ 1)
All available packages can be upgraded by using upgrade command without any parameters.  \newline % Row Count 4 (+ 2)
pisi up -dvs% Row Count 5 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{upgrade command with package-name parameter is used in order to upgraded packages. Multiple packages  \newline can be upgraded by separating the package names by a space.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Removing packages:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi remove package-name  \newline % Row Count 1 (+ 1)
pisi remove package-name1 package-name2% Row Count 2 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{remove command with package-name parameter is used in order to remove packages. Multiple packages can  \newline be removed by separating the package names by a space.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Installing Packages:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi it package-name –ignore-safety% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Installing just one package without installing all the upgradable packages available}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Package Operations:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Installing Packages: \newline % Row Count 1 (+ 1)
pisi install package-name  \newline % Row Count 2 (+ 1)
pisi install package-name1 package-name2% Row Count 3 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{install command with package-name parameter is used in order to install packages. Multiple packages can be  \newline installed by separating the package names by a space.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Creating Repository Index}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi index% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{index command in the repo directory is used in order to create the repository index (pisi-index.xml)}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Listing Components:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi list-components repo-name% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{One or more repo-name parameters can be used in order to list components in proper repositories.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Listing Components:}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi list-components% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{list-components command is used in order to list all components in available repositories.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Updating Repositories}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi update-repo repo-name% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{One or more repo-name parameters can be used in order to update proper repositories.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Updating Repositories}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi update-repo% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{update-repo command is used in order to update all available repositories.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Listing Repositories}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi list-repo% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{list-repo command is used in order to list which repositories are available.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Remove Repositories}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{pisi remove-repo repo-name% Row Count 1 (+ 1)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{remove-repo command with repo-name parameter is used in order to remove repositories}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}



\end{document}