\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{GA11}
\pdfinfo{
  /Title (windbg1111.pdf)
  /Creator (Cheatography)
  /Author (GA11)
  /Subject (windbg1111 Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{B6DBA7}
\definecolor{LightBackground}{HTML}{F5FAF4}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{windbg1111 Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{GA11} via \textcolor{DarkBackground}{\uline{cheatography.com/142828/cs/30680/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}GA11 \\
  \uline{cheatography.com/ga11} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 30th January, 2022.\\
   Updated 30th January, 2022.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{x{2.96 cm} x{5.04 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{符号}}  \tn
% Row 0
\SetRowColor{LightBackground}
.reload /f & .sympath .SRV{\emph{C:\textbackslash{}sym}}http://msdl.microsoft.com/download/symbols/ \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
x modulename!symbolname & search for function or symbols \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{\$iment(module)} & entry point of module \tn 
% Row Count 6 (+ 1)
% Row 3
\SetRowColor{white}
!drvobjt \textless{}name\textgreater{} & find drive \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
!devobj \textless{}name\textgreater{} & device object \tn 
% Row Count 9 (+ 1)
% Row 5
\SetRowColor{white}
!devhandles \textless{}handle\textgreater{} & app using drive \tn 
% Row Count 11 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.2 cm} x{4.8 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Brakpoints}}  \tn
% Row 0
\SetRowColor{LightBackground}
bp 0x\textless{}addr\textgreater{} & set breakpoint at address \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
bl & brakpoints \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
bd \textless{}\#\textgreater{} & disable breakpoint\# \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
bc \textless{}\#\textgreater{} & clear brakpoint\# \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
be \textless{}\#\textgreater{} & enable breakpoint \# \tn 
% Row Count 6 (+ 1)
% Row 5
\SetRowColor{white}
ba {[}r|w|e{]} 0x\textless{}addr\textgreater{} & break on {[}read|write|execute{]} \tn 
% Row Count 8 (+ 2)
% Row 6
\SetRowColor{LightBackground}
bu \textless{}symbolname\textgreater{} & break on symbol \tn 
% Row Count 9 (+ 1)
% Row 7
\SetRowColor{white}
sxe ld:dllname & break on module load \tn 
% Row Count 10 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.12 cm} x{4.88 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Control}}  \tn
% Row 0
\SetRowColor{LightBackground}
g or F5 & continue \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
p or F10 & step over \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
t or F11 & step into \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
Shift + F11 & step out \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
wt & trace and watch \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 5 (+ 0)
% Row 6
\SetRowColor{LightBackground}
pa or ta 0x\textless{}addr\textgreater{} & step to address \tn 
% Row Count 7 (+ 2)
% Row 7
\SetRowColor{white}
pc or tc & step to next call \tn 
% Row Count 8 (+ 1)
% Row 8
\SetRowColor{LightBackground}
pt or tt & step to next return \tn 
% Row Count 9 (+ 1)
% Row 9
\SetRowColor{white}
pct or tct & step to next call or return \tn 
% Row Count 11 (+ 2)
% Row 10
\SetRowColor{LightBackground}
ph or th & step to next branch \tn 
% Row Count 12 (+ 1)
% Row 11
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 12 (+ 0)
% Row 12
\SetRowColor{LightBackground}
F6 or .attach & attach to process \tn 
% Row Count 13 (+ 1)
% Row 13
\SetRowColor{white}
.detach & detach to process \tn 
% Row Count 14 (+ 1)
% Row 14
\SetRowColor{LightBackground}
.restart & retstart \tn 
% Row Count 15 (+ 1)
% Row 15
\SetRowColor{white}
q & quit \tn 
% Row Count 16 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{p{1.04 cm} x{6.96 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Thread}}  \tn
% Row 0
\SetRowColor{LightBackground}
a & \textasciitilde{}\textless{}{\bf{a}}\textgreater{}\textless{}b\textgreater{} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
* & all threads \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
. & current threads \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\textless{}\#\textgreater{} & thread ordinal number \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
b & \textasciitilde{}\textless{}a\textgreater{}\textless{}{\bf{b}}\textgreater{} \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
e & exectue \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
f & freeze \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
u & ufreeze \tn 
% Row Count 8 (+ 1)
% Row 8
\SetRowColor{LightBackground}
n & supsend \tn 
% Row Count 9 (+ 1)
% Row 9
\SetRowColor{white}
m & resume \tn 
% Row Count 10 (+ 1)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{empty lists threads} \tn 
% Row Count 11 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.92 cm} x{4.08 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Dump Structures}}  \tn
% Row 0
\SetRowColor{LightBackground}
k & dump all stack \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
r & dmp registers \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
!teb & dump TEB \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
!peb & dump PEB \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
!vadump & dump mem pages/info \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
!heap & dump heap \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
lm & list loaded modules \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
ln & list close symbol at memory address \tn 
% Row Count 9 (+ 2)
% Row 8
\SetRowColor{LightBackground}
!idt & interrupt descriptor table \tn 
% Row Count 11 (+ 2)
% Row 9
\SetRowColor{white}
dt modulename!symbolname 0x\textless{}addr\textgreater{} & dump structure for symbol \tn 
% Row Count 13 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{2.72 cm} x{5.28 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{CODE}}  \tn
% Row 0
\SetRowColor{LightBackground}
u 0x\textless{}addr\textgreater{} L\textless{}addr\textgreater{} & disassemble at addr L\# instructions \tn 
% Row Count 2 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{p{0.8 cm} x{7.2 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Memory}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{d* 0x\textless{}addr\textgreater{}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
a & ascii chars \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{u} \tn 
% Row Count 3 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}