\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{fuestc16}
\pdfinfo{
  /Title (dhcp-commands-engl.pdf)
  /Creator (Cheatography)
  /Author (fuestc16)
  /Subject (DHCP commands engl Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{61C75A}
\definecolor{LightBackground}{HTML}{F5FBF4}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{DHCP commands engl Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{fuestc16} via \textcolor{DarkBackground}{\uline{cheatography.com/100707/cs/22479/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}fuestc16 \\
  \uline{cheatography.com/fuestc16} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 22nd April, 2020.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{3}

\begin{tabularx}{5.377cm}{x{2.4885 cm} x{2.4885 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{DHCP Commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
ip dhcp excluded-address \textless{}IP start\textgreater{} \textless{}IP end\textgreater{} & Exclude IP addresses \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
ip dhcp pool \textless{}name\textgreater{} & Create a DHCP pool \tn 
% Row Count 4 (+ 1)
% Row 2
\SetRowColor{LightBackground}
network \textless{}IP\textgreater{} \textless{}SNM\textgreater{} & Network address of the pool \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
default-router \textless{}IP\textgreater{} & Default gateway of the pool \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
dns-server \textless{}IP\textgreater{} & DNS server of the pool \tn 
% Row Count 10 (+ 2)
% Row 5
\SetRowColor{white}
domain-name \textless{}address\textgreater{} & Sets domain name \tn 
% Row Count 12 (+ 2)
% Row 6
\SetRowColor{LightBackground}
ip helper-address \textless{}IP\textgreater{} & Configures an ip helper address \tn 
% Row Count 14 (+ 2)
% Row 7
\SetRowColor{white}
ip address dhcp & Configures interface to receive IP addressing from DHCP \tn 
% Row Count 17 (+ 3)
% Row 8
\SetRowColor{LightBackground}
lease \textless{}time\textgreater{} & Sets lease time \tn 
% Row Count 18 (+ 1)
% Row 9
\SetRowColor{white}
\mymulticolumn{2}{x{5.377cm}}{} \tn 
% Row Count 18 (+ 0)
% Row 10
\SetRowColor{LightBackground}
ipv6 nd managed-config-flag & Sets the managed address configuration flag \tn 
% Row Count 21 (+ 3)
% Row 11
\SetRowColor{white}
ipv6 nd other-config-flag & Configures the hosts to use stateful autoconfiguration to get non-IPv6-address information \tn 
% Row Count 26 (+ 5)
% Row 12
\SetRowColor{LightBackground}
ipv6 dhcp server \textless{}Poolname\textgreater{} & Enables DHCPv6 on an interface. \tn 
% Row Count 28 (+ 2)
% Row 13
\SetRowColor{white}
ipv6 dhcp relay destination \textless{}IPv6 /prefix-length\textgreater{} \textless{}interface\textgreater{} & Determines relay agent \tn 
% Row Count 32 (+ 4)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{5.377cm}{x{2.4885 cm} x{2.4885 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{DHCP Commands (cont)}}  \tn
% Row 14
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{5.377cm}}{} \tn 
% Row Count 0 (+ 0)
% Row 15
\SetRowColor{white}
show ip dhcp pool & Shows dhcp pools \tn 
% Row Count 1 (+ 1)
% Row 16
\SetRowColor{LightBackground}
show ip dhcp binding & Verifies bindings \tn 
% Row Count 2 (+ 1)
% Row 17
\SetRowColor{white}
show ip dhcp server statistics & Shows statistics \tn 
% Row Count 4 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{IPv6 Commands (if commands are not accepted)}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{show sim prefers} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{sdm prefer dual-ipv4-and-ipv6 default} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{do reload} \tn 
% Row Count 3 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{2.43873 cm} x{2.53827 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{VLAN}}  \tn
% Row 0
\SetRowColor{LightBackground}
encapsulate dot1q \textless{}vlan\textgreater{} & Enables dot1q encapsulation for clan 20 \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
switchport mode trunk & Changes switchport mode to trunk \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
switchport mode access & Changes switchport mode to access \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
switchport trunk allowed vlan \textless{}VLAN ID\textgreater{} & Specifies the VLAN for which this trunk port will carry traffic \tn 
% Row Count 10 (+ 4)
% Row 4
\SetRowColor{LightBackground}
switchport access vlan \textless{}VLAN ID\textgreater{} & Specifies the VLAN for which this access port will carry traffic \tn 
% Row Count 14 (+ 4)
% Row 5
\SetRowColor{white}
switchport trunk native vlan \textless{}VLAN ID\textgreater{} & Configures nativ VLAN \tn 
% Row Count 16 (+ 2)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{5.377cm}}{} \tn 
% Row Count 16 (+ 0)
% Row 7
\SetRowColor{white}
vlan \textless{}id\textgreater{} & Creates VLAN \tn 
% Row Count 17 (+ 1)
% Row 8
\SetRowColor{LightBackground}
name \textless{}name\textgreater{} & Sets name for VLAN \tn 
% Row Count 18 (+ 1)
% Row 9
\SetRowColor{white}
ip address \textless{}IP\textgreater{} \textless{}SNM\textgreater{} & Sets IP for VLAN \tn 
% Row Count 20 (+ 2)
% Row 10
\SetRowColor{LightBackground}
(no) shutdown & Start or shut down \tn 
% Row Count 21 (+ 1)
% Row 11
\SetRowColor{white}
\mymulticolumn{2}{x{5.377cm}}{} \tn 
% Row Count 21 (+ 0)
% Row 12
\SetRowColor{LightBackground}
show vlan & Shows all VLANS \tn 
% Row Count 22 (+ 1)
% Row 13
\SetRowColor{white}
show interfaces switchport & Displays information about all the switch port interfaces \tn 
% Row Count 25 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.34379 cm} x{3.63321 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{PC commands}}  \tn
% Row 0
\SetRowColor{LightBackground}
ipconfig /all & shows details about all network adapters \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
ipconfig /renew & Wants to have new IP address \tn 
% Row Count 4 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{2.43873 cm} x{2.53827 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{VLAN Befehle}}  \tn
% Row 0
\SetRowColor{LightBackground}
encapsulate dot1q \textless{}vlan\textgreater{} & Aktiviert dot1q encapsulation für ein VLAN \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
switchport mode trunk & Wechselt den Switchport Mode zu Trunk \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
switchport mode access & Wechselt den Switchport Mode zu Access \tn 
% Row Count 7 (+ 2)
% Row 3
\SetRowColor{white}
switchport trunk allowed vlan \textless{}VLAN ID\textgreater{} & Gibt das VLAN an für welches der Traffic vom Trunk Port drüber l{\"a}uft \tn 
% Row Count 11 (+ 4)
% Row 4
\SetRowColor{LightBackground}
switchport access vlan \textless{}VLAN ID\textgreater{} & Gibt das VLAN an für welches der Traffic vom Access Port drüber l{\"a}uft \tn 
% Row Count 15 (+ 4)
% Row 5
\SetRowColor{white}
switchport trunk native vlan \textless{}VLAN ID\textgreater{} & Definiert das Native VLAN \tn 
% Row Count 17 (+ 2)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{5.377cm}}{} \tn 
% Row Count 17 (+ 0)
% Row 7
\SetRowColor{white}
vlan \textless{}id\textgreater{} & Erstellt ein VLAN \tn 
% Row Count 18 (+ 1)
% Row 8
\SetRowColor{LightBackground}
name \textless{}name\textgreater{} & Setzt einen Namen für das VLAN \tn 
% Row Count 20 (+ 2)
% Row 9
\SetRowColor{white}
ip address \textless{}IP\textgreater{} \textless{}SNM\textgreater{} & Setzt eine IP für das VLAN \tn 
% Row Count 22 (+ 2)
% Row 10
\SetRowColor{LightBackground}
(no) shutdown & F{\"a}hrt es rauf oder runter \tn 
% Row Count 24 (+ 2)
% Row 11
\SetRowColor{white}
\mymulticolumn{2}{x{5.377cm}}{} \tn 
% Row Count 24 (+ 0)
% Row 12
\SetRowColor{LightBackground}
show vlan & Zeigt alle VLANS \tn 
% Row Count 25 (+ 1)
% Row 13
\SetRowColor{white}
show interfaces switchport & Zeigt informationen über die Switch Port Interfaces \tn 
% Row Count 28 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{1.34379 cm} x{3.63321 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{PC Befehle}}  \tn
% Row 0
\SetRowColor{LightBackground}
ipconfig /all & Zeigt Informationen über alle Netzwerkadapter \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
ipconfig /renew & Befehl um eine neu IP Adresse zu bekommen \tn 
% Row Count 4 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{5.377cm}}{\bf\textcolor{white}{Sollten IPv6 Befehle nicht angenommen werden}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{show sim prefers} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{5.377cm}}{sdm prefer dual-ipv4-and-ipv6 default} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{5.377cm}}{do reload} \tn 
% Row Count 3 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{5.377cm}{x{2.4885 cm} x{2.4885 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{DHCP Befehle}}  \tn
% Row 0
\SetRowColor{LightBackground}
ip dhcp excluded-address \textless{}IP start\textgreater{} \textless{}IP end\textgreater{} & Nimmt einen gewissen Adressbereich raus \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
ip dhcp pool \textless{}name\textgreater{} & Erstellt einen DHCP Pool \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
network \textless{}IP\textgreater{} \textless{}SNM\textgreater{} & Setzt IP des Pooles \tn 
% Row Count 6 (+ 1)
% Row 3
\SetRowColor{white}
default-router \textless{}IP\textgreater{} & Setzt Default Gateway des Pooles \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
dns-server \textless{}IP\textgreater{} & Setzt DNS-Server des Pooles \tn 
% Row Count 10 (+ 2)
% Row 5
\SetRowColor{white}
domain-name \textless{}address\textgreater{} & Setzt Domain des Pooles \tn 
% Row Count 12 (+ 2)
% Row 6
\SetRowColor{LightBackground}
ip helper-address \textless{}IP\textgreater{} & Bestimmt einen IP-Helper \tn 
% Row Count 14 (+ 2)
% Row 7
\SetRowColor{white}
ip address dhcp & Konfiguriert ein Interface so, dass es ihre IP Adresse mittels DHCP bezieht \tn 
% Row Count 18 (+ 4)
% Row 8
\SetRowColor{LightBackground}
lease \textless{}time\textgreater{} & Setzt die Leasezeit \tn 
% Row Count 19 (+ 1)
% Row 9
\SetRowColor{white}
\mymulticolumn{2}{x{5.377cm}}{} \tn 
% Row Count 19 (+ 0)
% Row 10
\SetRowColor{LightBackground}
ipv6 nd managed-config-flag & Setzt das managed address configuration flag \tn 
% Row Count 22 (+ 3)
% Row 11
\SetRowColor{white}
ipv6 nd other-config-flag & Konfiguriert den Host so, dass er stateful autoconfiguration benutz um non-IPv6-address information zu erhalten \tn 
% Row Count 28 (+ 6)
% Row 12
\SetRowColor{LightBackground}
ipv6 dhcp server \textless{}Poolname\textgreater{} & Aktiviert DHCP auf einem Interface \tn 
% Row Count 30 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{5.377cm}{x{2.4885 cm} x{2.4885 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{5.377cm}}{\bf\textcolor{white}{DHCP Befehle (cont)}}  \tn
% Row 13
\SetRowColor{LightBackground}
ipv6 dhcp relay destination \textless{}IPv6 /prefix-length\textgreater{} \textless{}interface\textgreater{} & Bestimmt einen Relay Agent \tn 
% Row Count 4 (+ 4)
% Row 14
\SetRowColor{white}
\mymulticolumn{2}{x{5.377cm}}{} \tn 
% Row Count 4 (+ 0)
% Row 15
\SetRowColor{LightBackground}
show ip dhcp pool & Zeigt DHCP Pools \tn 
% Row Count 5 (+ 1)
% Row 16
\SetRowColor{white}
show ip dhcp binding & Zeigt alle DHCP bindings \tn 
% Row Count 7 (+ 2)
% Row 17
\SetRowColor{LightBackground}
show ip dhcp server statistics & Anzeigen von DHCP Statistik \tn 
% Row Count 9 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}