\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{DucklingLover}
\pdfinfo{
  /Title (ospfv3.pdf)
  /Creator (Cheatography)
  /Author (DucklingLover)
  /Subject (OSPFv3 Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{14E6F5}
\definecolor{LightBackground}{HTML}{E1FBFD}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{OSPFv3 Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{DucklingLover} via \textcolor{DarkBackground}{\uline{cheatography.com/110515/cs/23023/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}DucklingLover \\
  \uline{cheatography.com/ducklinglover} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 27th May, 2020.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{Inhalt}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{Dieses Cheat-Sheet beinhaltet essenzielle Befehle und Erkl{\"a}rungen die im Verlauf der OSPF-Konfiguration für das RAI-Net ben{\"o}tigt werden.% Row Count 3 (+ 3)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{OSPF Erkl{\"a}rung}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{Bei Verwendung von Open Shortest Path First sendet ein Router, sobald er feststellt, dass es eine Änderung in den Routing-Tabellen gegeben hat, diese Information an alle anderen OSPF-Hosts innerhalb des Netzwerks, so dass alle über identische Routing-Tabellen verfügen. \newline % Row Count 6 (+ 6)
Anstatt einfach die Zahl der Router-Hops zwischen den Hosts eines Netzwerks zu z{\"a}hlen, trifft OSPF seine Entscheidung für einen Weg basierend auf Link States, die auch zus{\"a}tzliche Netzwerkinformationen beinhalten.% Row Count 11 (+ 5)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.76 cm} x{4.24 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{OSPFv3 Konfiguration Beispiel aus RAI-Net}}  \tn
% Row 0
\SetRowColor{LightBackground}
ip address 10.16.31.5 255.255.255.0 & Backbone 0 WAN IP Beispiel \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
ipv6 address \seqsplit{2001:A:A:1630::/64} & Backbone 0 IPv6 Adresse Beispiel \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
ipv6 ospf hello-interval 4 & Intervall wird auf 4 Sekunden gesetzt \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
ipv6 ospf 0 area 0 & Ein Interface wird mit der Process-ID 0 zur Area 0 hinzugefügt \tn 
% Row Count 9 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{Backbone 0}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.76 cm} x{4.24 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{OSPF überprüfen}}  \tn
% Row 0
\SetRowColor{LightBackground}
Router\# show ip ospf & Alle OSPF Informationen werden angezeigt \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
Router\# show ip ospf neighbor & Alle benachbarten Router werden angezeigt \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
Router\# show ip route ospf & OSPF Networks werden angezeigt \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
Router\# show ip protocols & OSPF Konfiguration wird angezeigt \tn 
% Row Count 8 (+ 2)
% Row 4
\SetRowColor{LightBackground}
Router\# show ip ospf interface & Alle Interfaces die OSPF verwenden werden angezeigt \tn 
% Row Count 11 (+ 3)
% Row 5
\SetRowColor{white}
Router\# show ip ospf interface fa0/1 & Zeigt OSPF Informationen für ein bestimmtes Interface \tn 
% Row Count 14 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{OSPF Versionen}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{Es gibt OSPFv2 und v3. Der Hauptunterschied ist IPv6. Aber es gibt noch weitere Änderungen, die für das RAI-Net aber nicht wichtig sind.% Row Count 3 (+ 3)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{8.4cm}}{\bf\textcolor{white}{DR, BDR, ABR}}  \tn
\SetRowColor{white}
\mymulticolumn{1}{x{8.4cm}}{ABR: Area Border Router, Router der mit mehreren Areas verbunden ist \newline % Row Count 2 (+ 2)
DR: Designated Router, Router mit der h{\"o}chsten Priorit{\"a}t. \newline % Row Count 4 (+ 2)
BDR: Backup designated Router, Ausfallsicherung für DR% Row Count 6 (+ 2)
} \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{IPv6 Befehle}}  \tn
% Row 0
\SetRowColor{LightBackground}
R1(config)\#ipv6 unicast-routing & IPv6 Routing wird aktiviert \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
R1(config-if)\#ipv6 address \seqsplit{2001:ABCD:ABCD:XY::z/126} eui-64 & Eine IPv6-Adresse wird auf ein Interface gesetzt \tn 
% Row Count 5 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{OSPF Konfigurieren}}  \tn
% Row 0
\SetRowColor{LightBackground}
Router(config)\# router ospf 1 & OSPF wird mit einer Prozess-ID aktiviert \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\seqsplit{Router(config-router)\#} network 192.168.1.0 0.0.0.255 area 0 & Das NEtzwerk für die Area 0 (Backbone) wird konfiuriert \tn 
% Row Count 6 (+ 4)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{Router(config-router)\#} router-id 1.1.1.1 & Eine Router-ID wird manuell vergeben \tn 
% Row Count 9 (+ 3)
% Row 3
\SetRowColor{white}
\seqsplit{Router(config-router)\#} auto-cost reference-bandwith 10000 & Die Standard-Bandwith wird ge{\"a}ndert \tn 
% Row Count 13 (+ 4)
% Row 4
\SetRowColor{LightBackground}
Router(config)\# clear ip ospf process & Setzt alle OSPF Verbindungen zurück. \tn 
% Row Count 16 (+ 3)
% Row 5
\SetRowColor{white}
Router(config)\# passive-interface fa/1 & Es werden keine Updates über passive Interfaces versendet. \tn 
% Row Count 19 (+ 3)
% Row 6
\SetRowColor{LightBackground}
Router(config)\# \seqsplit{no-passive-interface} Fa/1 & L{\"o}scht ein passives Interface \tn 
% Row Count 22 (+ 3)
% Row 7
\SetRowColor{white}
Router(config-if)\# ip ospf cost 1565 & Setzt eine Cost für ein Interface \tn 
% Row Count 25 (+ 3)
% Row 8
\SetRowColor{LightBackground}
Router(config-if)\# ip ospf priority 255 & Setzt eine Priorit{\"a}t für ein Interface \tn 
% Row Count 28 (+ 3)
% Row 9
\SetRowColor{white}
Router(config-if)\# ip ospf priority 0 & Dieser Router kann kein DR oder BDR werden \tn 
% Row Count 31 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}