\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{cjb3099}
\pdfinfo{
  /Title (system-engineering.pdf)
  /Creator (Cheatography)
  /Author (cjb3099)
  /Subject (System Engineering Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{E63232}
\definecolor{LightBackground}{HTML}{FDF2F2}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{System Engineering Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{cjb3099} via \textcolor{DarkBackground}{\uline{cheatography.com/57951/cs/15332/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}cjb3099 \\
  \uline{cheatography.com/cjb3099} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 31st March, 2018.\\
   Updated 31st March, 2018.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{4}

\begin{tabularx}{3.833cm}{p{0.2633 cm} p{0.2633 cm} p{0.2633 cm} p{0.2633 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{4}{x{3.833cm}}{\bf\textcolor{white}{Netstat}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{4}{x{3.833cm}}{Beschreibung: Mit diesen Statistiken kann man herausfinden, welche Ports ge{\"o}ffnet sind oder welche Verbindungen zu entfernten Rechnern bestehen. Für bestehende Verbindungen l{\"a}sst sich unter anderem die Adresse der Gegenstelle ablesen.} \tn 
% Row Count 5 (+ 5)
% Row 1
\SetRowColor{white}
\mymulticolumn{4}{x{3.833cm}}{Netstat -a: Displays all connections and listening ports.} \tn 
% Row Count 7 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{4}{x{3.833cm}}{Netstat -e: Displays Ethernet statistics} \tn 
% Row Count 8 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{4}{x{3.833cm}}{Netstat -r: Displays the contents of the routing table} \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}----}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Arp}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: Das Address Resolution Protocol (ARP) ist ein Netzwerkprotokoll, das zu einer Netzwerkadresse der Internetschicht die physische Adresse (Hardwareadresse) der Netzzugangsschicht ermittelt und diese Zuordnung gegebenenfalls in den so genannten ARP-Tabellen der beteiligten Rechner hinterlegt.} \tn 
% Row Count 7 (+ 7)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{arp -d: Removes the listed entry from the ARP cache} \tn 
% Row Count 9 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{arp -s: Adds a static entry to the ARP cache} \tn 
% Row Count 10 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{arp -a: Displays all the current ARP entries for all interfaces} \tn 
% Row Count 12 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Ping}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: Unter dem Ping-Wert versteht man die Zeitspanne zwischen dem Aussenden eines Datenpaketes an einen Empf{\"a}nger und des daraufhin unmittelbar zurückgeschickten Antwortpaketes.} \tn 
% Row Count 4 (+ 4)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{Ping -t: Pings the specified host until stopped. To see statistics and continue type Control-Break. To stop type Control-C.} \tn 
% Row Count 7 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Ping -l: Sends packets of a particular size.} \tn 
% Row Count 8 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{Ping -r: Records the route for count hops.} \tn 
% Row Count 9 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Tracert}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: Trace Route (traceroute / tracert) Trace Route ist ein Kommandozeilen-Tool, um in einem IP-Netzwerk den Weg von Datenpaketen zu verfolgen und sichtbar zu machen. Es geht darum festzustellen, welche Stationen ein Datenpaket bis zum Ziel nimmt.} \tn 
% Row Count 6 (+ 6)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{Tracert -d: This option prevents tracert from resolving IP addresses to hostnames, often resulting in much faster results.} \tn 
% Row Count 9 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Tracert -h: This tracert option specifies the maximum number of hops in the search for the target. If you do not specify MaxHops, and a target has not been found by 30 hops, tracert will stop looking.} \tn 
% Row Count 13 (+ 4)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{Tracert -6: This option forces tracert to use IPv6 only.} \tn 
% Row Count 15 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Nslookup}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: Den Host-Namen eingeben kann und dann dessen dazugeh{\"o}rige IP-Adresse erh{\"a}lt. Ein sogenannter Reverse Lookup ist ebenfalls m{\"o}glich, um den Host-Namen zu einer bestimmten IP-Adresse zu finden.} \tn 
% Row Count 5 (+ 5)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{nslookup (ENTER) dann domainname.xy: gibt die grundlegenden Ergebnisse aus} \tn 
% Row Count 7 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{set q=any (ENTER) - legt fest, dass so viele Ergebnisse wie m{\"o}glich angezeigt werden} \tn 
% Row Count 9 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{set q=mx (ENTER) - legt fest, dass alle Einstellungen für Mail angezeigt werden.} \tn 
% Row Count 11 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{MBSA}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: MBSA (Microsoft Baseline Security Analyzer) ist ein kostenloses Werkzeug, das Windows auf Sicherheitslücken untersucht. Es soll etwa typische sicherheitsrelevante Fehlkonfigurationen in Microsoft-Produkten und Windows ausfindig machen. Au{\ss}erdem überprüft es, ob alle aktuellen Sicherheitsupdates vorhanden sind. Das Programm kann ohne Gültigkeitsprüfung bei Microsoft heruntergeladen werden} \tn 
% Row Count 9 (+ 9)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{-qp: This switch instructs MBSA to not show scan progress.} \tn 
% Row Count 11 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{-u: This switch lets you specify the user name of an administrator-level user on the target computer(s).} \tn 
% Row Count 14 (+ 3)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{-nd: This switch instructs MBSA to not download any files from the Microsoft Web site when performing a scan. In other words, it instructs MBSA to perform the scan like it would in offline mode.} \tn 
% Row Count 18 (+ 4)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Nirsoft wnetwatcher}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: Wireless Network Watcher is a small utility that scans your wireless network and displays the list of all computers and devices that are currently connected to your network.} \tn 
% Row Count 4 (+ 4)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{/cfg \textless{}Filename\textgreater{}: Start Wireless Network Watcher with the specified configuration file. For example:  WNetWatcher.exe /cfg "c:\textbackslash{}config\textbackslash{}wnw.cfg"  WNetWatcher.exe /cfg "\%AppData\%\textbackslash{}WNetWatcher.cfg"} \tn 
% Row Count 8 (+ 4)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{/stext \textless{}Filename\textgreater{}: Scan your network, and save the network devices list into a regular text file.} \tn 
% Row Count 10 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{/shtml \textless{}Filename\textgreater{}: Scan your network, and save the network devices list into HTML file (Horizontal).} \tn 
% Row Count 12 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{ipconfig}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: ipconfig ist ein Befehl des Betriebssystems Microsoft Windows die Hardwareadressen bzw. die IP-Adressen der im lokalen Netzwerk verwendeten Ger{\"a}te anzeigt.} \tn 
% Row Count 4 (+ 4)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{ipconfig -all: Show detailed information} \tn 
% Row Count 5 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{ipconfig -renew: renew all adapters} \tn 
% Row Count 6 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{ipconfig -flushdns: Clears the contents of the DNS resolver cache.} \tn 
% Row Count 8 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Windows Performance Analyzer}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: WPA is a powerful analysis tool that combines a very flexible UI with extensive graphing capabilities and data tables that can be pivoted and that have full text search capabilities. WPA provides an Issues window to explore the root cause of any identified.} \tn 
% Row Count 6 (+ 6)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{CTRL+O: Open a new trace or session} \tn 
% Row Count 7 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{CTRL+G: Show and navigate to Graph Explorer} \tn 
% Row Count 8 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{F1: Open WPA help site} \tn 
% Row Count 9 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{MXToolbox}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: This website can do Tests on every domain to test, if the are legit etc..} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{Blacklist: The blacklist check will test a mail server IP address against over 100 DNS based email blacklists} \tn 
% Row Count 5 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{SMTP Diagnostics: This test will connect to a mail server via SMTP, perform a simple Open Relay Test and verify the server has a reverse DNS (PTR) record.} \tn 
% Row Count 9 (+ 4)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{Domain Health: The Domain Health Check will execute hundreds of domain/email/network performance tests to make sure all of your systems are online and performing optimally} \tn 
% Row Count 13 (+ 4)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Pathping}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: Pathping ist ein erweiterter Windows-Befehl zu Tracert und Ping. Im Gegensatz zu Tracert liefert Pathping detaillierte Informationen über die Weiterleitung der Pakete zu den einzelnen Rechnern} \tn 
% Row Count 5 (+ 5)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{PathPing -n: Does not resolve addresses to host names.} \tn 
% Row Count 7 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Pathping -p: Number of milliseconds to wait between pings.} \tn 
% Row Count 9 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{Pathping -T: Attaches a layer 2 priority tag to the packets and sends it to each of the network devices in the path. This helps in identifying the network devices that do not have layer 2 priority configured properly. The -T switch is used to test for Quality of Service (QoS) connectivity.} \tn 
% Row Count 15 (+ 6)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Tcpview}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: TCPView is a Windows program that will show you detailed listings of all TCP and UDP endpoints on your system, including the local and remote addresses and state of TCP connections.} \tn 
% Row Count 4 (+ 4)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{{\bf{Using Tcpvcon:}} {\emph{Tcpvcon usage is similar to that of the built-in Windows netstat utility:}}} \tn 
% Row Count 6 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{-a: Show all endpoints (default is to show established TCP connections).} \tn 
% Row Count 8 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{-n: Don't resolve addresses.} \tn 
% Row Count 9 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Sysinternals Process Explorer}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: Process Explorer shows you information about which handles and DLLs processes have opened or loaded.} \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{-l: Dump the sizes of pagefile-backed sections.} \tn 
% Row Count 4 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{-r: Flag DLLs that relocated because they are not loaded at their base address.} \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{-t: Show process tree.} \tn 
% Row Count 7 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Route}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: Eine Routingtabelle (auch Routing Information Base) enth{\"a}lt Angaben zu m{\"o}glichen Wegen, zum „optimalen" Weg, zum Status, zur Metrik, d. h. dem Bewertungsma{\ss}stab des Weges, und zum Alter. Grundlage ist die Verknüpfung der Ziel-IP-Adresse mit einer Richtungsangabe in Form des Folgerouters und des Interfaces, über den der Paketstrom zu lenken ist.} \tn 
% Row Count 8 (+ 8)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{Route -f: Clears the routing table of all gateway entries. If this is used in conjunction with one of the other commands, the tables are cleared prior to running the command.} \tn 
% Row Count 12 (+ 4)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Route -Print \textless{} destination \textgreater{}: Prints a route to the specified host. Optionally, prints the routes for the specified destination.} \tn 
% Row Count 15 (+ 3)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{Route -Change \textless{}destination\textgreater{} Mask \textless{}netmask\textgreater{} \textless{}gateway\textgreater{} Metric \textless{}metric\textgreater{} if \textless{}interface\textgreater{}: Modifies an existing route.} \tn 
% Row Count 18 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Windows Performance Toolkit}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: The Windows Performance Toolkit consists of two independent tools: Windows Performance Recorder (WPR) and Windows Performance Analyzer (WPA). In addition, support is maintained for the previous command-line tool, Xperf. However, Xperfview is no longer supported. All recordings must be opened and analyzed by using WPA.} \tn 
% Row Count 7 (+ 7)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{IControlErrorInfo: Provides functions that obtain information about errors that occur when the control manager performs an operation.} \tn 
% Row Count 10 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{IOnOffTransitionManager: Enables the client to store the profiles of the IProfileCollection to the registry for boot tracing.} \tn 
% Row Count 13 (+ 3)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{IProfile: Represents an individual profile that the client controls.} \tn 
% Row Count 15 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{3.833cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{3.833cm}}{\bf\textcolor{white}{Microsoft Assessment and Planning Toolkit}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{Beschreibung: The Microsoft Assessment and Planning Toolkit makes it easy to assess your current IT infrastructure for a variety of technology migration projects. This Solution Accelerator provides a powerful inventory, assessment, and reporting tool to simplify the migration planning process.} \tn 
% Row Count 6 (+ 6)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{3.833cm}}{How to run MAP tool: - Open MAP tool - Create inventory database which will be used to save inventory data and collected statistics inside it when working with the MAP tool , by default SQL express is installed by default when installing MAP tool , SQL express is used to host the inventory database. - After creating the database. the MAP console launches giving the option to select your Inventory scenario , since MAP tool can be used to target different scenarios like SQL database consolidation, VM migration, windows upgrade, lync readiness check, etc…} \tn 
% Row Count 18 (+ 12)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{3.833cm}}{} \tn 
% Row Count 18 (+ 0)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}