\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{Chrismoyo}
\pdfinfo{
  /Title (repeater-procedures.pdf)
  /Creator (Cheatography)
  /Author (Chrismoyo)
  /Subject (Repeater  Procedures Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{347AE3}
\definecolor{LightBackground}{HTML}{F2F6FD}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Repeater  Procedures Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{Chrismoyo} via \textcolor{DarkBackground}{\uline{cheatography.com/33769/cs/11147/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}Chrismoyo \\
  \uline{cheatography.com/chrismoyo} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Published 13th March, 2017.\\
   Updated 12th March, 2017.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{x{2.48 cm} x{5.52 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{ACCESS CONTROL}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{ACCESS CONTROL}} & When attending to a repeater ,or pop these are the steps to follow; \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
 & 1. Contact {\bf{NOC or Support}} and sign up for keys. \tn 
% Row Count 5 (+ 2)
% Row 2
\SetRowColor{LightBackground}
 & 2. Carry a valid {\bf{Company Identification}}. \tn 
% Row Count 7 (+ 2)
% Row 3
\SetRowColor{white}
 & 3. If the site contacts are available the Engineer should ask {\bf{NOC / SUPPORT }}to inform the building management of the pending visit and its purpose. (Some buildings require a letter before allowing Access, the technical coordinator will prepare it on request) ; \tn 
% Row Count 17 (+ 10)
% Row 4
\SetRowColor{LightBackground}
 & 4. Visit the site with a car clearly to identify the company. \tn 
% Row Count 20 (+ 3)
% Row 5
\SetRowColor{white}
 & 5. On arrival to the site the engineer should present the relevant particulars ( Letters /ID) to the building management and security officers for  approval. \tn 
% Row Count 26 (+ 6)
% Row 6
\SetRowColor{LightBackground}
 & 6.  When Access is granted , proceed with the work. \tn 
% Row Count 28 (+ 2)
% Row 7
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{{\bf{Completion of tasks}}} \tn 
% Row Count 29 (+ 1)
% Row 8
\SetRowColor{LightBackground}
 & 1. Make sure the door is shut and locked up.. \tn 
% Row Count 31 (+ 2)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{8.4cm}{x{2.48 cm} x{5.52 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{ACCESS CONTROL (cont)}}  \tn
% Row 9
\SetRowColor{LightBackground}
 & 2. Surrender the keys to {\bf{NOC/SUPPORT}} \tn 
% Row Count 2 (+ 2)
% Row 10
\SetRowColor{white}
 & 3. Sign out of the log book. \tn 
% Row Count 4 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{2.96 cm} x{5.04 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{HOUSEKEEPING}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{EVERYDAY HOUSEKEEPING} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
{\bf{REPEATER}} - internal & 1. {\bf{COOLING}} - Make sure the repeater is cool (ceiling fan and/or air conditioner working). If not escalate to SUPPORT /NOC to follow up. \tn 
% Row Count 7 (+ 6)
% Row 2
\SetRowColor{LightBackground}
 & 2.{\bf{LABELLING}} -  After installation of radio or indoor units. Make sure all cables are clearly  labelled.( patch cables,  power cables, power units). \tn 
% Row Count 14 (+ 7)
% Row 3
\SetRowColor{white}
 & 3. {\bf{CLEANSINESS}} - always leave place in tidy manner, better than you found it (throw away all trash and all unwanted components). \tn 
% Row Count 20 (+ 6)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 20 (+ 0)
% Row 5
\SetRowColor{white}
{\bf{REPEATER}} - Tower & \textasciicircum{}TBA\textasciicircum{} \tn 
% Row Count 22 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.04 cm} x{4.96 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{SCHEDULE MAINTENANCE}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{SCHEDULE MAINTENANCE}} & Scheduled maintenance is to be carried out at regular periods , at least once every year for each REPEATER OR POP. \tn 
% Row Count 5 (+ 5)
% Row 1
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{{\bf{TASK SHEET}}} \tn 
% Row Count 6 (+ 1)
% Row 2
\SetRowColor{LightBackground}
{\bf{REPEATER / POP}} & 1. {\bf{Dust}} -Blow the dust from all active components. \tn 
% Row Count 9 (+ 3)
% Row 3
\SetRowColor{white}
 & 2. {\bf{Labelling}} - labelling all components. \tn 
% Row Count 11 (+ 2)
% Row 4
\SetRowColor{LightBackground}
 & 3. {\bf{Sweeping}} - The floor area should always clear of any particles and objects. \tn 
% Row Count 15 (+ 4)
% Row 5
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 15 (+ 0)
% Row 6
\SetRowColor{LightBackground}
{\bf{ELECTRICALS}} & 1. {\bf{AIR CONDITIONER}} -  Cleaning of the Air conditioner by  qualified technicians. \tn 
% Row Count 19 (+ 4)
% Row 7
\SetRowColor{white}
 & 2. {\bf{BATTERY}} - Maintenance and measurement of the output. \tn 
% Row Count 22 (+ 3)
% Row 8
\SetRowColor{LightBackground}
 & 3. {\bf{INVERTER}} - conditional check \tn 
% Row Count 24 (+ 2)
% Row 9
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 24 (+ 0)
% Row 10
\SetRowColor{LightBackground}
{\bf{TOWERS}} & 1. All towers to be regularly  assessed for rust and painted if condition necessitates \tn 
% Row Count 28 (+ 4)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.04 cm} x{4.96 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{TROUBLESHOOTING}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{SCENARIO 1}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
{\bf{POWER MONITOR}} & If the power monitor is {\bf{DOWN}} for more than 6 hours \tn 
% Row Count 4 (+ 3)
% Row 2
\SetRowColor{LightBackground}
 & {\bf{SOLUTION}} \tn 
% Row Count 5 (+ 1)
% Row 3
\SetRowColor{white}
 & Contact the building management send an engineer to attend \tn 
% Row Count 8 (+ 3)
% Row 4
\SetRowColor{LightBackground}
 & {\bf{CHECK}} \tn 
% Row Count 9 (+ 1)
% Row 5
\SetRowColor{white}
 & 1. Electricity source (Tanesco) \tn 
% Row Count 11 (+ 2)
% Row 6
\SetRowColor{LightBackground}
 & 2.{\bf{ MCB}} for a Tripped Circuit. \tn 
% Row Count 13 (+ 2)
% Row 7
\SetRowColor{white}
 & 3. Faulty {\bf{AVS/AVR}}. \tn 
% Row Count 14 (+ 1)
% Row 8
\SetRowColor{LightBackground}
 & 4.{\bf{ FAULTY}} power monitor (router) if everything else ok. \tn 
% Row Count 17 (+ 3)
% Row 9
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 17 (+ 0)
% Row 10
\SetRowColor{LightBackground}
 & If problem is found with the above escalate to electrician \tn 
% Row Count 20 (+ 3)
% Row 11
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 20 (+ 0)
% Row 12
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{SCENARIO 2}}} \tn 
% Row Count 21 (+ 1)
% Row 13
\SetRowColor{white}
{\bf{GENERAL POWER FAILURE}} & In the case of a general power failure. \tn 
% Row Count 23 (+ 2)
% Row 14
\SetRowColor{LightBackground}
 & 1. Check the power source for the switch and the state of switch. \tn 
% Row Count 26 (+ 3)
% Row 15
\SetRowColor{white}
 & 2. Check status of {\bf{UPS}} plugged into the switch. \tn 
% Row Count 29 (+ 3)
% Row 16
\SetRowColor{LightBackground}
 & 3. Check the {\bf{INVERTER}} functionality.{\bf{ (LED)}} \tn 
% Row Count 32 (+ 3)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{8.4cm}{x{3.04 cm} x{4.96 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{TROUBLESHOOTING (cont)}}  \tn
% Row 17
\SetRowColor{LightBackground}
 & 4. Check the{\bf{BATTERY}} source. \tn 
% Row Count 2 (+ 2)
% Row 18
\SetRowColor{white}
 & 5. Check the {\bf{AVS/AVR}} \tn 
% Row Count 3 (+ 1)
% Row 19
\SetRowColor{LightBackground}
 & 6. Check the power availability. \tn 
% Row Count 5 (+ 2)
% Row 20
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 5 (+ 0)
% Row 21
\SetRowColor{LightBackground}
 & IF any problem is found with any of the above escalate to the electrician or NOC/SUPPORT \tn 
% Row Count 9 (+ 4)
% Row 22
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 9 (+ 0)
% Row 23
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{SCENARIO 3}}} \tn 
% Row Count 10 (+ 1)
% Row 24
\SetRowColor{white}
{\bf{POWER Fluctuations}} & 1. Check the  {\bf{UPS}} \tn 
% Row Count 12 (+ 2)
% Row 25
\SetRowColor{LightBackground}
 & 2. Check the {\bf{INVERTER}}. \tn 
% Row Count 14 (+ 2)
% Row 26
\SetRowColor{white}
 & 3. Check the{\bf{ BATTERY }} source. \tn 
% Row Count 16 (+ 2)
% Row 27
\SetRowColor{LightBackground}
 & 4. Check the  {\bf{POWER SOURCE}} for low voltage. \tn 
% Row Count 18 (+ 2)
% Row 28
\SetRowColor{white}
\mymulticolumn{2}{x{8.4cm}}{} \tn 
% Row Count 18 (+ 0)
% Row 29
\SetRowColor{LightBackground}
WIMAX BSDU & If the  WIMAX Bsdu goes down. check power supply unit. and replace. \tn 
% Row Count 21 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}