\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{c3rtw}
\pdfinfo{
  /Title (comandos-r-y-sw.pdf)
  /Creator (Cheatography)
  /Author (c3rtw)
  /Subject (Comandos R y SW Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{3A3869}
\definecolor{LightBackground}{HTML}{F2F2F5}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Comandos R y SW Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{c3rtw} via \textcolor{DarkBackground}{\uline{cheatography.com/33016/cs/10259/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}c3rtw \\
  \uline{cheatography.com/c3rtw} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 12th March, 2017.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.


\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Comandos ingreso y basicos}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router\textgreater{}enable} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router\#configure terminal} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Switch(config)\#do copy r s} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Presionar tabulador completa la palabra} \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router\#configure "?"  {\bf{el signo de pregunta sirve para ayudar a saber que palabra viene despues}}} \tn 
% Row Count 6 (+ 2)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#do ping *\textless{}ping destino\textgreater{}} \tn 
% Row Count 7 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#do tracert o tracer \textless{}ip destino\textgreater{}} \tn 
% Row Count 8 (+ 1)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router\#show running-config} \tn 
% Row Count 9 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Configuracion interfaces}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#interface} {\emph{\textless{}nombre interfaz\textgreater{}\textless{}numero de interfaz\textgreater{}}}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip address \textless{}ip\textgreater{} \textless{}mascara\textgreater{}} \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#no shutdown} \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#clock rate {\emph{56000}} {\emph{\textless{}seriales con reloj\textgreater{}}}} \tn 
% Row Count 6 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\# ipv6 address \textless{}ipv6\textgreater{}} \tn 
% Row Count 7 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router\#show ip interface brief} \tn 
% Row Count 8 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip address dhcp {\emph{\textless{}la interfaz recibe ip por DHCP\textgreater{}}}} \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Seguridad}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#enable password {\emph{password}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#enable secret {\emph{password}}} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#service password-encryption} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#line console 0} \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-line)\#password} {\emph{password}}} \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-line)\#login}} \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#line vty 0 {\emph{4}}} \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-line)\#password} {\emph{password}}} \tn 
% Row Count 8 (+ 1)
% Row 8
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-line)\#login}} \tn 
% Row Count 9 (+ 1)
% Row 9
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#banner motd {\bf{\$}} {\emph{esciribir mensaje y utilizar el \$ para finalizar el mensaje}}} \tn 
% Row Count 11 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Resetear router}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{!.Reinicar router 2. CTRL+B mientras cargan los astericos} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Rommon 1\textgreater{}confreg 0x2142} \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Rommon 2\textgreater{}reset} \tn 
% Row Count 4 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Enrutamiento estatico}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ip route {\emph{\textless{}red destino\textgreater{} \textless{}mascara destino\textgreater{} \textless{}salto o interfaz salida\textgreater{}}}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ip route 0.0.0.0. 0.0.0.0 \textless{}salto\textgreater{} predeterminada} \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router\#show ip route} \tn 
% Row Count 5 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Configutacion SSH}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#hostname {\emph{name}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ip domain-name {\emph{nombre de dominio}}} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#crypto key generate rsa} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#{\emph{1024}}} \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#username {\emph{username}} privilege {\emph{15}} password {\emph{password}}} \tn 
% Row Count 6 (+ 2)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#line vty 0 15} \tn 
% Row Count 7 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-line)\#transport} input ssh} \tn 
% Row Count 8 (+ 1)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-line)\#login} local} \tn 
% Row Count 9 (+ 1)
% Row 8
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\# ip ssh version 2} \tn 
% Row Count 10 (+ 1)
% Row 9
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{{\bf{SWITCH}}} \tn 
% Row Count 11 (+ 1)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch(config)\#interface} vlan 10} \tn 
% Row Count 12 (+ 1)
% Row 11
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Switch(config-if)\#ip address \textless{}\textgreater{} \textless{}\textgreater{}} \tn 
% Row Count 13 (+ 1)
% Row 12
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Switch(config)\#ip default-gateway \textless{}ip interfaz router\textgreater{}} \tn 
% Row Count 15 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{configuracion OSPF}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#router ospf 1} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-router)\#network} \textless{}ip red\textgreater{} \textless{}wilcard\textgreater{} area 0 "redes direct conect"} \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-router)\#redistribute} static subnets \textless{}inyecta rutas staticas\textgreater{}} \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-router)\#default-information} originate} \tn 
% Row Count 7 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router\#show ip ospf neighbor} \tn 
% Row Count 8 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router\#show ip protocols} \tn 
% Row Count 9 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Configuracion OSPFv6}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ipv6 router ospf 1} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ipv6 unicast-routing} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-rtr)\#router-id} "nombre"} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ipv6 ospf 1 area 0} \tn 
% Row Count 4 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Resetear switch}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Reiniciar router presionar Boton del switch y esperar a que carge switch:} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{switch: flash\_init} \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{switch: dir flash:} \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{switch: delete vlan.dat.renamed} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{switch: delete config.text.renamed} \tn 
% Row Count 6 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{switch: reset} \tn 
% Row Count 7 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Configuracion VLAN router}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{{\bf{Router}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#interface} {\emph{g0/0.10}}} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-subif)\#encapsulation} dot1Q 10} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config-subif)\#ip address \textless{}\textgreater{} \textless{}\textgreater{}} \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#interface} g0/0} \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#no shutdown} \tn 
% Row Count 6 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Configuracion VLANSwitch}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Switch(config)\#vlan 10} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch(config)\#interface} vlan 10} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch(config-vlan)\#name} nombre} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch(config)\#interface} range f0/1-24} \tn 
% Row Count 4 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch(config-if-range)\#switchport} access vlan 10} \tn 
% Row Count 5 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch(config)\#interface} range g0/1-2} \tn 
% Row Count 6 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch(config-if-range)\#switchport} mode trunk} \tn 
% Row Count 7 (+ 1)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Switch(config)\#do show vlan brief} \tn 
% Row Count 8 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Configuracion DHCP}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ip dhcp pool {\emph{name}}} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(dhcp-config)\#network} {\emph{\textless{}ip de la red\textgreater{}}} {\emph{\textless{}mascara de la red\textgreater{}}}} \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(dhcp-config)\#default-router} {\emph{ip interfaz de salida}}} \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(dhcp-config)\#dns-server} {\emph{ip DNS}}} \tn 
% Row Count 6 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router\#show ip dhcp binding} \tn 
% Row Count 7 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router\#show ip dhcp pool {\emph{name}}} \tn 
% Row Count 8 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Configuracion DHCPV6}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ipv6 dhcp pool "nombre"} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-dhcpv6)\#dns-server} {\emph{ip DNS}}} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ipv6 dhcp server "nombre"} \tn 
% Row Count 3 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{ACL extendida}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{CERCA DEL ORIGEN} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#access-list} {\emph{101 permit tcp host 10.1.1.2 host 172.16.1.1 eq telnet}}} \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#access-list} {\emph{101 permit ip any any}}} \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip access-group {\emph{101 in or out}}} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{OTRA FORMA PARA CREAR ACL EXTENDIDA} \tn 
% Row Count 6 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ip access-list extended {\emph{\textless{}nombre o numero 100-199\textgreater{}}}} \tn 
% Row Count 8 (+ 2)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config-ext-nacl)\#{\emph{permit tcp host 10.1.1.2 host 172.16.1.1 eq telnet}}} \tn 
% Row Count 10 (+ 2)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip access-group {\emph{101 in or out}}} \tn 
% Row Count 11 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{NAT dinamico}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ip nat pool {\emph{\textless{}nombre\textgreater{} \textless{}start ip address\textgreater{} \textless{}end ip address\textgreater{}" nestmask }}\textless{}mask\textgreater{}*} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#access-list} 1 permit \textless{}ip red\textgreater{} \textless{}wilcard red\textgreater{}} \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ip nat inside source list 1 pool \textless{}nombre\textgreater{}} \tn 
% Row Count 6 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip nat inside} \tn 
% Row Count 7 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip nat outside} \tn 
% Row Count 8 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#do show ip nat translation} \tn 
% Row Count 9 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{ACL estandar}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{CERCA DEL DESTINO} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#access-list} {\emph{1 permit \textless{}red ip 1-99\textgreater{} \textless{}mask red\textgreater{}}}} \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#access-list} {\emph{ 1 permit ip any }}} \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Otra forma para crear una ACL  Standar} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ip access-list standard \textless{}nombre o numero 1-99\textgreater{}} \tn 
% Row Count 7 (+ 2)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config-std-nacl)\#permit} \textless{}red\textgreater{} \textless{}wildcard\textgreater{}} \tn 
% Row Count 8 (+ 1)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip access-group {\emph{nombre o numero}} {\emph{in or out}}} \tn 
% Row Count 10 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{NAT estatico}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ip nat inside source static *\textless{}ip privada host\textgreater{} \textless{}ip public\textgreater{}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#interface} g0/0} \tn 
% Row Count 3 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip nat outside} \tn 
% Row Count 4 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#interface} g0/1} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip nat inside} \tn 
% Row Count 6 (+ 1)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#do show ip nat translation} \tn 
% Row Count 7 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{PAT}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Router(config)\#access-list} 1 permit \textless{}ip de red\textgreater{} \textless{}wilcard\textgreater{}} \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#ip nat inside source list 1 interface g0/0 overload} \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip nat inside} \tn 
% Row Count 5 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Router(config-if)\#ip nat outside} \tn 
% Row Count 6 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Router(config)\#do show ip nat translation} \tn 
% Row Count 7 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{Spanning-tree}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Switch(config)\#do show spanning-tree} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch(config)\#spanning-tree} vlan {\emph{\textless{}id-vlan\textgreater{} root \{primary | secondary\}}}} \tn 
% Row Count 3 (+ 2)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch(config)\#spanning-tree} vlan {\emph{\textless{}numero\textgreater{}}} priority {\emph{\textless{}numero\textgreater{}}}} \tn 
% Row Count 5 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Switch(config)\#no spanning-tree {\emph{desactivar spanning-tree}}} \tn 
% Row Count 7 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{VTP Vlan Trunk Protocols}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Primero crear las VLAN} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Switch(config)\#vtp domain {\emph{\textless{}nombre cualquiera\textgreater{}}}} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Switch(config)\#vtp password {\emph{\textless{}clave cualquiera\textgreater{}}}} \tn 
% Row Count 3 (+ 1)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Switch(config)\#vtp mode {\emph{client, server o transparent}}} \tn 
% Row Count 5 (+ 2)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Switch(config)\#do show vtp status} \tn 
% Row Count 6 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{17.67cm}{X}
\SetRowColor{DarkBackground}
\mymulticolumn{1}{x{17.67cm}}{\bf\textcolor{white}{PORT-SECURITY}}  \tn
% Row 0
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Switch01(config-if)\# switchport mode access} \tn 
% Row Count 1 (+ 1)
% Row 1
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch01(config-if)\#switchport} port-security} \tn 
% Row Count 2 (+ 1)
% Row 2
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{switchport port-security violation {\emph{\{ protect | restrict | shutdown \}}}} \tn 
% Row Count 4 (+ 2)
% Row 3
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{MAC UNICA} \tn 
% Row Count 5 (+ 1)
% Row 4
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch01(config-if)\#switchport} port-security maximum 1} \tn 
% Row Count 7 (+ 2)
% Row 5
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Switch01(config-if)\# switchport port-security violation shutdown} \tn 
% Row Count 9 (+ 2)
% Row 6
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Switch01(config-if)\# switchport port-security mac-address {\emph{0a04.aaf8.13ad}}} \tn 
% Row Count 11 (+ 2)
% Row 7
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{PORT STICKY} \tn 
% Row Count 12 (+ 1)
% Row 8
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Switch01(config-if)\# switchport mode access} \tn 
% Row Count 13 (+ 1)
% Row 9
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch01(config-if)\#switchport} port-security} \tn 
% Row Count 14 (+ 1)
% Row 10
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{\seqsplit{Switch01(config-if)\#switchport} port-security maximum {\emph{1}}} \tn 
% Row Count 16 (+ 2)
% Row 11
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{Switch01(config-if)\# switchport port-security violation shutdown} \tn 
% Row Count 18 (+ 2)
% Row 12
\SetRowColor{LightBackground}
\mymulticolumn{1}{x{17.67cm}}{Switch01(config-if)\# switchport port-security mac-address sticky} \tn 
% Row Count 20 (+ 2)
% Row 13
\SetRowColor{white}
\mymulticolumn{1}{x{17.67cm}}{show port-security interface {\emph{\textless{}\textgreater{}}}} \tn 
% Row Count 21 (+ 1)
\hhline{>{\arrayrulecolor{DarkBackground}}-}
\end{tabularx}
\par\addvspace{1.3em}



\end{document}