\documentclass[10pt,a4paper]{article}

% Packages
\usepackage{fancyhdr}           % For header and footer
\usepackage{multicol}           % Allows multicols in tables
\usepackage{tabularx}           % Intelligent column widths
\usepackage{tabulary}           % Used in header and footer
\usepackage{hhline}             % Border under tables
\usepackage{graphicx}           % For images
\usepackage{xcolor}             % For hex colours
%\usepackage[utf8x]{inputenc}    % For unicode character support
\usepackage[T1]{fontenc}        % Without this we get weird character replacements
\usepackage{colortbl}           % For coloured tables
\usepackage{setspace}           % For line height
\usepackage{lastpage}           % Needed for total page number
\usepackage{seqsplit}           % Splits long words.
%\usepackage{opensans}          % Can't make this work so far. Shame. Would be lovely.
\usepackage[normalem]{ulem}     % For underlining links
% Most of the following are not required for the majority
% of cheat sheets but are needed for some symbol support.
\usepackage{amsmath}            % Symbols
\usepackage{MnSymbol}           % Symbols
\usepackage{wasysym}            % Symbols
%\usepackage[english,german,french,spanish,italian]{babel}              % Languages

% Document Info
\author{adik311}
\pdfinfo{
  /Title (salesforce-cli-command-reference.pdf)
  /Creator (Cheatography)
  /Author (adik311)
  /Subject (Salesforce CLI Command Reference Cheat Sheet)
}

% Lengths and widths
\addtolength{\textwidth}{6cm}
\addtolength{\textheight}{-1cm}
\addtolength{\hoffset}{-3cm}
\addtolength{\voffset}{-2cm}
\setlength{\tabcolsep}{0.2cm} % Space between columns
\setlength{\headsep}{-12pt} % Reduce space between header and content
\setlength{\headheight}{85pt} % If less, LaTeX automatically increases it
\renewcommand{\footrulewidth}{0pt} % Remove footer line
\renewcommand{\headrulewidth}{0pt} % Remove header line
\renewcommand{\seqinsert}{\ifmmode\allowbreak\else\-\fi} % Hyphens in seqsplit
% This two commands together give roughly
% the right line height in the tables
\renewcommand{\arraystretch}{1.3}
\onehalfspacing

% Commands
\newcommand{\SetRowColor}[1]{\noalign{\gdef\RowColorName{#1}}\rowcolor{\RowColorName}} % Shortcut for row colour
\newcommand{\mymulticolumn}[3]{\multicolumn{#1}{>{\columncolor{\RowColorName}}#2}{#3}} % For coloured multi-cols
\newcolumntype{x}[1]{>{\raggedright}p{#1}} % New column types for ragged-right paragraph columns
\newcommand{\tn}{\tabularnewline} % Required as custom column type in use

% Font and Colours
\definecolor{HeadBackground}{HTML}{333333}
\definecolor{FootBackground}{HTML}{666666}
\definecolor{TextColor}{HTML}{333333}
\definecolor{DarkBackground}{HTML}{0D9DDA}
\definecolor{LightBackground}{HTML}{EFF8FC}
\renewcommand{\familydefault}{\sfdefault}
\color{TextColor}

% Header and Footer
\pagestyle{fancy}
\fancyhead{} % Set header to blank
\fancyfoot{} % Set footer to blank
\fancyhead[L]{
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{C}
    \SetRowColor{DarkBackground}
    \vspace{-7pt}
    {\parbox{\dimexpr\textwidth-2\fboxsep\relax}{\noindent
        \hspace*{-6pt}\includegraphics[width=5.8cm]{/web/www.cheatography.com/public/images/cheatography_logo.pdf}}
    }
\end{tabulary}
\columnbreak
\begin{tabulary}{11cm}{L}
    \vspace{-2pt}\large{\bf{\textcolor{DarkBackground}{\textrm{Salesforce CLI Command Reference Cheat Sheet}}}} \\
    \normalsize{by \textcolor{DarkBackground}{adik311} via \textcolor{DarkBackground}{\uline{cheatography.com/196812/cs/41397/}}}
\end{tabulary}
\end{multicols}}

\fancyfoot[L]{ \footnotesize
\noindent
\begin{multicols}{3}
\begin{tabulary}{5.8cm}{LL}
  \SetRowColor{FootBackground}
  \mymulticolumn{2}{p{5.377cm}}{\bf\textcolor{white}{Cheatographer}}  \\
  \vspace{-2pt}adik311 \\
  \uline{cheatography.com/adik311} \\
  \end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Cheat Sheet}}  \\
   \vspace{-2pt}Not Yet Published.\\
   Updated 8th October, 2024.\\
   Page {\thepage} of \pageref{LastPage}.
\end{tabulary}
\vfill
\columnbreak
\begin{tabulary}{5.8cm}{L}
  \SetRowColor{FootBackground}
  \mymulticolumn{1}{p{5.377cm}}{\bf\textcolor{white}{Sponsor}}  \\
  \SetRowColor{white}
  \vspace{-5pt}
  %\includegraphics[width=48px,height=48px]{dave.jpeg}
  Measure your website readability!\\
  www.readability-score.com
\end{tabulary}
\end{multicols}}




\begin{document}
\raggedright
\raggedcolumns

% Set font size to small. Switch to any value
% from this page to resize cheat sheet text:
% www.emerson.emory.edu/services/latex/latex_169.html
\footnotesize % Small font.

\begin{multicols*}{2}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{sf alias}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{sf alias list}} & List all aliases currently set on your local computer. \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
{\bf{sf alias set}} {\emph{alias}}={\emph{'value'}} & Set one or more aliases on your local computer. \tn 
% Row Count 6 (+ 3)
% Row 2
\SetRowColor{LightBackground}
{\bf{sf alias unset}}  {\emph{alias}} {\emph{my-other-alias}} & Unset one or more aliases that are currently set on your local computer. \tn 
% Row Count 10 (+ 4)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\emph{{[}-a|-all{]}}} : Unset all currently set aliases. \newline {\emph{{[}-p|-{}-no-prompt{]}}} : Don't prompt the user for confirmation when unsetting all alliases.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{4 cm} x{4 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{sf config}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{sf config get}} {\emph{CONFIG\_VARIABLE}} {\emph{{[}-{}-verbose{]}}} & Get the value of a configuration variable.\{\{nl\}\}{\emph{-{}-verbose}} : Display whether the configuration variables are set locally or globally. \tn 
% Row Count 7 (+ 7)
% Row 1
\SetRowColor{white}
{\bf{sf config list}} & List the configuration variables that you've previously set. \tn 
% Row Count 10 (+ 3)
% Row 2
\SetRowColor{LightBackground}
{\bf{sf config set}} {\emph{CONFIG\_VARIABLE=NEW\_VALUE}} {\emph{{[}-g|-{}-global{]}}} & Set one or more configuration variables, such as your default org.\{\{nl\}\}{\emph{{[}-g|-{}-global{]}}} : Set the configuration variables globally, so they can be used from any Salesforce DX project. \tn 
% Row Count 20 (+ 10)
% Row 3
\SetRowColor{white}
{\bf{sf config unset}} {\emph{CONFIG\_VARIABLE}} {\emph{{[}-g|-{}-global{]}}} & Unset local or global configuration variables.\{\{nl\}\}{\emph{{[}-g|-{}-global{]}}} : Unset the configuration variables globally. \tn 
% Row Count 26 (+ 6)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\emph{CONFIG\_VARIABLE}} can be multiple variables separated by space, e.g., {\emph{target-org api-version}}.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{2.4 cm} x{5.6 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{Configuration Variables}}  \tn
% Row 0
\SetRowColor{LightBackground}
\seqsplit{`org-api-version`} & The API version for a specific project or all projects. Normally, Salesforce CLI assumes that you're using the same version of the CLI as the Dev Hub org. \tn 
% Row Count 6 (+ 6)
% Row 1
\SetRowColor{white}
\seqsplit{`target-org`} & The username or alias for an org that all commands run against by default. \tn 
% Row Count 9 (+ 3)
% Row 2
\SetRowColor{LightBackground}
\seqsplit{`target-dev-hub`} & The username or alias for your default Dev Hub org. \tn 
% Row Count 11 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{\{\{link="https://developer.salesforce.com/docs/atlas.en-us.sfdx\_setup.meta/sfdx\_setup/sfdx\_dev\_cli\_config\_values.htm"\}\}Salesforce CLI Setup Guide: Configuration Variables\{\{/link\}\}}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.12 cm} x{4.88 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{sf org create}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{sf org create sandbox}} & Create a sandbox org. \tn 
% Row Count 2 (+ 2)
% Row 1
\SetRowColor{white}
{\bf{sf org create scratch}} & Create a scratch org \tn 
% Row Count 4 (+ 2)
% Row 2
\SetRowColor{LightBackground}
{\bf{sf org create shape}} & Create a scratch org configuration (shape) based on the specified source org. \tn 
% Row Count 8 (+ 4)
% Row 3
\SetRowColor{white}
{\bf{sf org create snapshot}} & Create a snapshot of a scratch org. \tn 
% Row Count 10 (+ 2)
% Row 4
\SetRowColor{LightBackground}
{\bf{sf org create user}} & Create a user for a scratch org. \tn 
% Row Count 12 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.2 cm} x{4.8 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{sf project deploy {[}{[}WIP{]}{]}}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{project deploy preview}} & Preview a deployment to see what will deploy to the org, the potential conflicts, and the ignored files. \tn 
% Row Count 5 (+ 5)
% Row 1
\SetRowColor{white}
{\bf{project deploy start}} & Deploy metadata to an org from your local project. \tn 
% Row Count 8 (+ 3)
% Row 2
\SetRowColor{LightBackground}
{\bf{project deploy validate}} & Validate a metadata deployment without actually executing it. \tn 
% Row Count 11 (+ 3)
% Row 3
\SetRowColor{white}
{\bf{project deploy resume}} & Resume watching a deploy operation and update source tracking when the deploy completes. \tn 
% Row Count 15 (+ 4)
% Row 4
\SetRowColor{LightBackground}
{\bf{project deploy cancel}} & Cancel a deploy operation. \tn 
% Row Count 17 (+ 2)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{ {\emph{ Universal attributes: }} }} \newline {\emph{{[}-o|-{}-target-org{]}}} : Username or alias of the target org. \newline  \newline \{\{link="https://developer.salesforce.com/docs/atlas.en-us.sfdx\_cli\_reference.meta/sfdx\_cli\_reference/cli\_reference\_project\_commands\_unified.htm"\}\}Salesforce CLI Command Reference: project Commands \newline \{\{/link\}\}}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}

\begin{tabularx}{8.4cm}{x{3.52 cm} x{4.48 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{sf org login}}  \tn
% Row 0
\SetRowColor{LightBackground}
{\bf{sf org login access-token}} & Authorize an org using an existing Salesforce access token. \tn 
% Row Count 3 (+ 3)
% Row 1
\SetRowColor{white}
{\emph{-r|-{}-instance-url INSTANCE-URL}} & URL of the instance that the org lives on.\{\{nl\}\}If you specify an -{}-instance-url value, this value overrides the sfdcLoginUrl value in your sfdx-project.json file.\{\{nl\}\}To specify a My Domain URL, use the format "https://\textless{}MyDomainName\textgreater{}.my.salesforce.com".\{\{nl\}\}To specify a sandbox, set -{}-instance-url to "https://\textless{}MyDomainName\textgreater{}-{}-\textless{}SandboxName\textgreater{}.sandbox.my.salesforce.com". \tn 
% Row Count 20 (+ 17)
% Row 2
\SetRowColor{LightBackground}
{\bf{sf org login device}} & Authorize an org using a device code. \tn 
% Row Count 22 (+ 2)
% Row 3
\SetRowColor{white}
{\bf{sf org login jwt}} & Log in to a Salesforce org using a JSON web token (JWT). \tn 
% Row Count 25 (+ 3)
% Row 4
\SetRowColor{LightBackground}
{\bf{sf org login sfdx-url}} & Authorize an org using a Salesforce DX authorization URL stored in a file or through standard input (stdin). \tn 
% Row Count 30 (+ 5)
\end{tabularx}
\par\addvspace{1.3em}

\vfill
\columnbreak
\begin{tabularx}{8.4cm}{x{3.52 cm} x{4.48 cm} }
\SetRowColor{DarkBackground}
\mymulticolumn{2}{x{8.4cm}}{\bf\textcolor{white}{sf org login (cont)}}  \tn
% Row 5
\SetRowColor{LightBackground}
{\bf{sf org login web}} & Log in to a Salesforce org using the web server flow. \tn 
% Row Count 3 (+ 3)
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\SetRowColor{LightBackground}
\mymulticolumn{2}{x{8.4cm}}{{\bf{ {\emph{ Universal attributes: }} }} \newline {\emph{{[}-a|-{}-alias{]}}} : Alias for the org. \newline {\emph{{[}-s|-{}-set-default{]}}} : Set the authenticated org as the default that all org-related commands run against. \newline {\emph{{[}-d|-{}-set-default-dev-hub{]}}} : Set the authenticated org as the default Dev Hub.}  \tn 
\hhline{>{\arrayrulecolor{DarkBackground}}--}
\end{tabularx}
\par\addvspace{1.3em}


% That's all folks
\end{multicols*}

\end{document}